Home > Samsung > Communications System > Samsung Idcs 500 System Administration And Special Features Guide

Samsung Idcs 500 System Administration And Special Features Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Idcs 500 System Administration And Special Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							34
    CUSTOMER SET RELOCATION This program is used to swap information associated with two stations. All
    assignments such as trunk ring, station group, station COS, station speed
    dial etc. will follow this program. 12 button keysets and 24 button keysets
    can be exchanged. Basic 7 button keysets can be exchanged with Basic 7
    button key sets. Single line stations numbers can be exchanged. If incom-
    patible set types are selected the system will provide an ERROR: NO MATCH
    message. 12 button and 24 button key assignments should be taken in con-
    sideration when relocating these type of sets. The table below shows which
    phones can be switched with each other.
    NOTE: In order to use this program it must first be activated by a technician.
    Please see your installing company to have this done if you wish to use this
    program.
    PROGRAM KEYS 
    UP& DOWN- Used to scroll through options.
    KEYPAD- Used to enter selections.
    SOFT KEYS- Move cursor left and right.
    SPK- Used to store data and advance to next program.
    HOLD- Used to clear previous entry.
    ANS/RLS- Used to select ALL.
    ACTION DISPLAY
    1. Press TRSF 315SET RELOCATION
    Display showsEXT _   EXT
    2. Enter first station number (e.g., 202)SET RELOCATION
    Press RIGHTsoft key to move cursorEXT 202  EXT _
    3. Enter second station number (e.g., 210) SET RELOCATION
    Press RIGHTsoft key to enter dataEXT 202  EXT 2
    10
    4. Display will return to STEP 1SET RELOCATION
    Go to STEP 2EXT _   EXT
    OR press TRSFto store and exit 
    programming.
    HOLIDAYThis program provides the ability to set as many as 20 different holidays.
    Each holiday will override the System Operating Mode for that particular
    date with a programmed ring plan.
    PROGRAM KEYS 
    UP& DOWN- Used to scroll through options.
    KEYPAD- Used to enter selections.
    SOFT KEYS- Move cursor left and right.
    HOLD- Used to clear an entry.
    ACTION DISPLAY
    1. Press TRSF and then dial 512R
    ING PLAN
    Display showsFOLLOW1
    2. Press the right soft key to move theRING PLAN
    cursor to bottom half of displayFOLLOW1
    3. Enter the desired ring plan (e.g., 0-6)RING PLAN
    Display will return to STEP 1FOLLOW44. Press UPor DOWNto change displayA
    SSIGN HOLIDAY
    to holiday assignment01:
    5. Press the right soft key to move theASSIGN HOLIDAY
    cursor to bottom half of display01:
    6. Enter a desired holiday date ASSIGN HOLIDAY
    (e.g., 1225)01:
    7. Press TRSFto store and exit ASSIGN HOLIDAY
    programming OR press SPKto store01:1225
    and advance to the next program
    33 
    						
    							36 35
    SYSTEM MAINTENANCE
    ALARMS
    The iDCS 500 is provided with software that self-checks for any failures. If a
    failure does occur in the iDCS 500 software or hardware, a fault error will be
    generated and buffered to an alarm report. During an alarm state every
    phone with an assigned SYSTEM ALARMbutton will ring and cause the
    SYSTEM ALARMbutton to flash amber. A phone with a display should be
    used so that the alarm information can be viewed. When an alarm occurs,
    the user can press the SYSTEM ALARMbutton to view and scroll through
    the alarms. This will silence the audible part of the alarm, but the SYSTEM
    ALARMbutton will continue to flash until your Service Company views and
    clears the alarms in the alarm report located in the system software.
    E L B A T W O L L A N O I T A C O L E R T E S R E M O T S U C
    L / SNT B 721 C S B21 D C L42 C S B42 D C LMO A 2 3S C D i & S C D
    M O A 4 6B 8 S C D iB8 1 S C D iB 8 1 S C D i
    S C D i h t i w
    M O A 4 1B 8 2 S C D iB 8 2 S C D
    S C D i h t i w
    M O A 4 1
    L / SS E YONONONONONONONONONONONON
    N T B 7O NSE YONONONONONONONONONONON
    2 1 C S BO NONSE YSE YONONONONONONONONON
    2 1 D C LO NONSE YSE YONONONONONONONONON
    4 2 C S BO NONONONSE YSE YONONONONONONON
    4 2 D C LO NONONONSE YSE YONONONONONONON
    M O A 2 3O NONONONONONSE YSE YSE YSE YONSE YON
    S C D i & S C D
    M O A 4 6O NONONONONONONSE YONONONONON
    B 8 S C D iO NONONONONONONONSE YONONiO NON
    B 8 1 S C D iO NONONONONONONONONSE YONSE YON
    B 8 1 S C D i
    S C D i h t i w
    M O A 4 1O NONONONONONONONONONSE YONON
    B 8 2 S C D iO NONONONONONONONONSE YONSE YON
    B 8 2 S C D i
    S C D i h t i w
    M O A 4 1O NONONONONONONONONONONONSE Y 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Idcs 500 System Administration And Special Features Guide