Samsung Shr5162 N Manual

Smart Viewer _47
 
10 Smart Viewer
1.  These buttons enable you to select setup items for DVR Setup, Viewer Setup, Site 
Setup, and S/W Version.
2. 

In this box, you can set the details on each 
setup item. 
3. 

Using this button, you can exit from the 
current window.
4. 

You can use buttons for saving the modified 
data, returning the previous settings, and 
exiting from the setup window.
  Setup Item Selection buttons
- 
DVR Setup: Allows you to modify the 
settings of the DVR.
-  Viewer Setup:...

48_ Smart Viewer
For more details, see Chapter 5, “Menu 
Setup.”
-  Admin Password
You can change the Admin password 
related settings for control of DVR.
- 

User Password
You can change the user password 
related settings for control of DVR.
CAUTION
For the system password, you can 
input numeric values only up to 8 
digits.
  The Delete key and key combinations 
like CTRL+C and CTRL+V in the 
keyboard are not supported for input of 
system password.
  For deletion of any input value, use the...

Smart Viewer _49
 
10 Smart Viewer
-  Storage SetupIt displays the information of the HDD that 
is contained in your DVR. Also you can 
d
etermine whether or not to repeat recording 
and make a beep sound when any disk 
failure happens.
-  Remote Control Device You can configure the settings for the 
remote control that is installed in the DVR 
system. You can toggle between On and 
O
ff. The remote control ID can be set among 
0 to 99.
If you have directly installed the remote 
control in the DVR system...

50_ Smart Viewer
 The Delete key and key combinations 
like CTRL+C and CTRL+V in the 
keyboard are not supported for input of 
camera title.
  For deletion of any input value, use the 
BACKSPACE key.
- 

PTZ Device
You can configure the settings for PTZ 
cameras, which include camera ID, protocol, 
baud rate, parity, data bit, and stop bit. 
   Monitoring Setup
You can configure the monitoring-related 
settings. For more details, see Chapter 5, 
“Menu Setup.”
  Recording
You can configure the...

Smart Viewer _51
 
10 Smart Viewer
-  Alarm Detection SetupIt configures the settings for alarm recording.
More than one camera should be 
selected to apply the alarm.
- 
Motion Detection Setup
It configures the settings for recording 
through motion detection.
-  Video Loss Setup It configures the video loss related settings.
 Schedule
You can configure schedule-related settings. 
For more details, see Chapter 5, “Menu 
Setup.” 
- Record Schedule You can change the schedule recording-
related...

52_ Smart Viewer
 Network
Y
ou can configure the network-related settings. 
For more details, see Chapter 5, “Menu Setup.” -  Network Password You can set both Admin password and user 
password for connecting to the DVR system 
through the network using Smart Viewer.
CAUTION
 For the network password, you can 
input numeric values only up to 8 
digits.
  If you leave the password blank 
and apply it, a warning message 
appears to ask you to retype it. 
 The Delete key and key combinations 
like...

Smart Viewer _53
 
10 Smart Viewer
Viewer Setup
Click Viewer Setup for configuring the Smart 
Viewer related settings. This Viewer Setup 
consists of 5 different items: Video Recording, 
File Converting, Sequence Time, OSD Display, 
and Auto Connection.
1
2
3
5
4
6
87
1.  The currently displayed video data can be saved in a DVR format (*.dvr) file. The related 
settings are made here.
2. 

A DVR file can be converted into a JPEG 
or AVI file. The destination folders are 
determined here.
3. 

You can set...

54_ Smart Viewer
 Language
 
You can set the language to be displayed on 
Smart Viewer.
Site Setup
Click Site Setup for configuring the site-related 
settings. Smart Viewer connects to the DVR or 
site that has been registered here. A site can 
have multiple DVRs.
1
3
52
4
1.  The registered DVRs are displayed.
2.  You can use the buttons for adding/deleting/ editing DVRs.
3. 

Use the button to move the selected DVR to 
the selected site. But, if the selected DVR is 
set to ADSL Network, it cannot be...

Smart Viewer _55
 
10 Smart Viewer
If you have selected Use DDNS in the 
Network Settings menu of DVR or used an IP 
splitter to register a URL using DDNS, you can 
connect through the designated URL.
I
f you want to connect through the URL, 
select  URL in Address Type  and enter the 
URL set in  URL.
Set the port number in Port No. so that it 
matches the port number that you’ve set in the 
network menu of DVR. 
  The MAC address of DVR is written on 
the side label of the product. It is also 
found...

56_ Smart Viewer
The site name can be input in both 
English and Korean up to maximum 10 
letters.
To delete an existing site or DVR, use Delete. 
After selecting a site or DVR and click Delete, 
the following message appears. Click OK to 
confirm it. After this action, the DVR name 
is deleted but the information of DVR is not 
removed. 
When the site to be deleted is connected to 
Smart Viewer, the following message appears. If 
you really want to delete the site, disconnect the 
site and retry to...