Home > Samsung > DVR > Samsung Shr5162 N Manual

Samsung Shr5162 N Manual

Here you can view all the pages of manual Samsung Shr5162 N Manual. The Samsung manuals for DVR are available online for free. You can easily download all the documents as PDF.

Page 61

Smart Viewer _57
 
10 Smart Viewer
 If a DVR is not connected to Smart 
Viewer, it is displayed in gray and “Not 
Connected” appears in the Status 
column. 
For software upgrade, click the following button 
to open the DVR firmware file.
5162/5082
5162/5082
After selecting a firmware file, click Open and 
select Upgrade. 
The progress of the upgrade is displayed at the 
bottom of the screen.
Smart Viewer enables you to extract the menu 
settings for the connected DVR. After selecting a 
DVR, click...

Page 62

58_ Smart Viewer
If the network password of a DVR differs from 
the connection password set in Smart Viewer, 
a login message appears to let you input the 
correct password manually.
2.  Duplicate Admin user connection
 
When the DVR that you want to connect to has 
been already occupied by an Admin user but 
you retry connection with the Admin privilege, 
the previously connected session is automatically 
disconnected.
The system allows simultaneous access 
to DVR by up to 3 users, which include 
one...

Page 63

Smart Viewer _59
 
10 Smart Viewer
3.  When audio signal is available, the audio mark appears.
4. 
It displays whether the PTZ controls are 
active.
5. 

The current channel alarm status is 
displayed.
6. 

The name and IP address of the connected 
DVR are displayed.
  Clicking the speaker icon changes the 
audio On and Off. 
 
: Audio Off   : Audio On
  When the audio function is disabled, the 
following icon is displayed. 
 
: Audio Disabled
  When the alarm or motion is detected, 
its status is...

Page 64

60_ Smart Viewer
Camera Connection Indication 
Window
The window displays the connection state of 
DVR and the connected cameras.
 Yellow: When Smart Viewer is 
successfully connected to a DVR. When 
the camera is connected for monitoring.
  Black: When Smart Viewer cannot be 
connected to a DVR.
  Blue: When Smart Viewer can connect 
to a DVR but it is disconnected now. 
Screen Split Selection Buttons
The buttons present modes like full screen, 
single, 4-split, 9-split, and 16-split modes. 
You can...

Page 65

Smart Viewer _61
 
10 Smart Viewer
NEXT Button
When this button is clicked, next screen follows. 
In Single Mode, the channel numbers are 
sequentially switched from 1 to 16. In Quad 
(4-split) Mode, the screens are changed like 
1st 4 channels (1,2,3,4) --> 2nd 4 channels 
(5,6,7,8) --> 3rd 4 channels (9,10,11,12) 
--> 4th 4 channels (13,14,15,16). In 9-split 
Mode, the screens are changed from 9 
channels (1,2,3,4,5,6,7,8,9) to 7 channels 
(10,11,12,13,14,15,16). In 16-split Mode, the 
screen is...

Page 66

62_ Smart Viewer
Audio Volume Control Button
You can adjust the audio volume level (0 to 10) 
of a channel or mute it. 
Video Brightness/Contrast Control 
Button
After selecting a channel, you can adjust the 
brightness and contrast levels (0 to 10) of video 
image using the control buttons (+,-). The default 
value is 5. To return the default settings, press 
the button on the right. 
 The adjusted audio volume, brightness, 
and contrast values are saved on your 
PC and remain unchanged even if 
Smart...

Page 67

Smart Viewer _63
 
10 Smart Viewer
The preset function is supported by all 
cameras. You can set up to 20 presets. 
But an active directory (AD) protocol 
camera can have 7 presets.
The names of 2,
3 , and 
4 may vary 
depending on the camera vendor. And 
those functions may not be supported by 
some product.
   
Samsung cameras support those 
functions.
  
In case of Panasonic cameras, the 
names of AUTOPAN, SCAN, and 
PATTERN are as following:
2  SEQUENCE 
3 AUTOPAN 
4 SORT. 
  In case of PELCO...

Page 68

64_ Smart Viewer
1.  The screen shows the playback channels. 
2.  Click this to move to the Search mode for searching and playing the video files 
recorded.
3. 

Click this to move to the Remote mode for 
playing back the recorded DVR video images 
remotely.
4. 

Click this to move to the Local mode for playing 
back the DVR files recorded on your PC.
5.  Use this calendar to select year, month, and  date for search.
6. 

Use buttons for adjusting the audio volume 
and video brightness/contrast.
7....

Page 69

Smart Viewer _65
 
10 Smart Viewer
Remote Mode
This mode transfers the video data recorded on 
DVR through the network for playback. Up to 4 
channels are allowed for simultaneous search 
and playback. The video data is played at the 
position where the time bar is located. 
When clicking this button, it changes to the 
Remote mode.
Calendar Window
If the video data has been recorded on a date, 
the date is distinguished in red. If you click the 
date, the recorded video information is displayed 
in the...

Page 70

66_ Smart Viewer
2. File Conversion button
When this button is clicked, the system 
converts a DVR file into JPEG or AVI format.
To perform this function
a.  Click Open to select a DVR file to be  converted.
b. 

Select JPEG Frame or AVI Video.
c.  Click Start to convert the file. To stop  conversion, click Stop.
 If JPEG Frame is selected, the file is 
converted to “*.jpg” file after clicking 
Start. The converted JPG file is saved 
according to the preset route: Setup 
> Viewer Setup > File Converting...
Start reading Samsung Shr5162 N Manual

Related Manuals for Samsung Shr5162 N Manual

All Samsung manuals