Samsung SyncMaster 460DRn, 460DR LCD Display User Manual
Have a look at the manual Samsung SyncMaster 460DRn, 460DR LCD Display User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 58
Color Temp is a measure of the warmth of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
MENU → , → ENTER → , → ENTER → , → ENTER
Image Lock Image Lock is used to fine-tune and get the best image by removing noise that crea\
tes
unstable images with jitters and shakiness. If satisfactory results are \
not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again.
(Available in
PC, BNC mode only)
Coarse Removes noise such as...](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-57.png "Page 58
Color Temp is a measure of the warmth of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
MENU → , → ENTER → , → ENTER → , → ENTER
Image Lock Image Lock is used to fine-tune and get the best image by removing noise that crea\
tes
unstable images with jitters and shakiness. If satisfactory results are \
not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again.
(Available in
PC, BNC mode only)
Coarse Removes noise such as...")
![Page 59
Fine
Removes noise such as horizontal stripes. If the noise persists even aft\
er Fine tuning, repeat
it after adjusting the frequency (clock speed).
MENU →
, → ENTER → , → ENTER → , → ENTER → , → ENTER
Position Adjusts the screen location horizontally and vertically.
MENU →
, → ENTER → , → ENTER → , → ENTER → , / , → ENTER
Adjusting the LCD Display](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-58.png "Page 59
Fine
Removes noise such as horizontal stripes. If the noise persists even aft\
er Fine tuning, repeat
it after adjusting the frequency (clock speed).
MENU →
, → ENTER → , → ENTER → , → ENTER → , → ENTER
Position Adjusts the screen location horizontally and vertically.
MENU →
, → ENTER → , → ENTER → , → ENTER → , / , → ENTER
Adjusting the LCD Display")
![Page 60
Auto Adjustment
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in
PC, BNC mode only) Note
The direct button on the remote control is the AUTO button.
MENU → , → ENTER → , → ENTER
Signal Balance This is used to make up for the weak RGB signal transmitted by a long si\
gnal cable.
(Available in
PC, BNC mode only)
Signal Balance Selects either On or Off with the signal control.Adjusting...](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-59.png "Page 60
Auto Adjustment
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in
PC, BNC mode only) Note
The direct button on the remote control is the AUTO button.
MENU → , → ENTER → , → ENTER
Signal Balance This is used to make up for the weak RGB signal transmitted by a long si\
gnal cable.
(Available in
PC, BNC mode only)
Signal Balance Selects either On or Off with the signal control.Adjusting...")
![Page 62
PIP Picture
Adjusts the PIP Screen Settings.
Note
Available Modes: PIP ON
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the difference between the lightest and darkest areas of the PIP\
window.
4. Color
Adjusts the Color of the PIP window on the screen.
5. Tint
Adds a natural tone to the PIP window. Note
You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI...](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-61.png "Page 62
PIP Picture
Adjusts the PIP Screen Settings.
Note
Available Modes: PIP ON
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the difference between the lightest and darkest areas of the PIP\
window.
4. Color
Adjusts the Color of the PIP window on the screen.
5. Tint
Adds a natural tone to the PIP window. Note
You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI...")
![Page 64
Custom
By using the on-screen menus, the contrast and brightness can be changed\
to your personal
preference.
1.
Contrast
Adds a natural tone to the PIP window.
2. Brightness
Adjusts the Brightness.
3. Sharpness
Adjusts the picture Sharpness.
4. Color
Adjusts the picture Color.
5. Tint
Adds a natural tone to the display. Note
Operates only for AV and S-Video mode. Operates only if the video signal is NTSC.
MENU → , → ENTER → , → ENTER → ENTER → , → , → ENTER
Adjusting the LCD Display](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-63.png "Page 64
Custom
By using the on-screen menus, the contrast and brightness can be changed\
to your personal
preference.
1.
Contrast
Adds a natural tone to the PIP window.
2. Brightness
Adjusts the Brightness.
3. Sharpness
Adjusts the picture Sharpness.
4. Color
Adjusts the picture Color.
5. Tint
Adds a natural tone to the display. Note
Operates only for AV and S-Video mode. Operates only if the video signal is NTSC.
MENU → , → ENTER → , → ENTER → ENTER → , → , → ENTER
Adjusting the LCD Display")
![Page 65
Color Tone
The color tones can be changed. The individual Color components are also\
user adjustable.
1.
Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2 Note
If you set the Color Tone to Cool1, Cool2, Normal, Warm1, or Warm2, the Color Temp
function is disabled.
MENU → , → ENTER → , → ENTER → , → ENTER
Color Temp Adjusting the LCD Display](http://img.usermanuals.tech/thumb/66/98278/w64_drndr_d-64.png "Page 65
Color Tone
The color tones can be changed. The individual Color components are also\
user adjustable.
1.
Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2 Note
If you set the Color Tone to Cool1, Cool2, Normal, Warm1, or Warm2, the Color Temp
function is disabled.
MENU → , → ENTER → , → ENTER → , → ENTER
Color Temp Adjusting the LCD Display")
MENU → , → ENTER → , → ENTER → ENTER → , → ENTER Signal Control Adjusts the Gain and Sharpness manually. MENU → , → ENTER → , → ENTER → , → ENTER → ENTER → , / , → ENTER Size The Size can be switched. 1. 16:9 2. 4:3 MENU → , → ENTER → , → ENTER → , → ENTER Adjusting the LCD Display
PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP ON 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the difference between the lightest and darkest areas of the PIP\ window. 4. Color Adjusts the Color of the PIP window on the screen. 5. Tint Adds a natural tone to the PIP window. Note You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI mode. Operates only if the video signal is NTSC. MENU → , → ENTER → , → ENTER → , → ENTER → , → ENTER Picture [ AV / S-Video / Component / HDMI Mode] Available Modes • PC / BNC / DVIAdjusting the LCD Display
• AV • S-Video • Component • HDMI • MagicInfo Note • The MagicInfo menu is available in DRn models. Mode The LCD Display has four automatic picture settings ( Dynamic, Standard, Movie and Custom) that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the P.MODE button. MENU → , → ENTER → ENTER → , → ENTER Adjusting the LCD Display
Custom By using the on-screen menus, the contrast and brightness can be changed\ to your personal preference. 1. Contrast Adds a natural tone to the PIP window. 2. Brightness Adjusts the Brightness. 3. Sharpness Adjusts the picture Sharpness. 4. Color Adjusts the picture Color. 5. Tint Adds a natural tone to the display. Note Operates only for AV and S-Video mode. Operates only if the video signal is NTSC. MENU → , → ENTER → , → ENTER → ENTER → , → , → ENTER Adjusting the LCD Display
Color Tone The color tones can be changed. The individual Color components are also\ user adjustable. 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool1, Cool2, Normal, Warm1, or Warm2, the Color Temp function is disabled. MENU → , → ENTER → , → ENTER → , → ENTER Color Temp Adjusting the LCD Display
Color temp is a measure of the warmth of the image colors. Note This function is only enabled if the Color Tone is set to Off. MENU → , → ENTER → , → ENTER → , → ENTER Size The Size can be switched. 1. 16:9 2. Zoom 1 3. Zoom 2 4. 4:3 Note The Zoom1, Zoom2 are not available in 1080i (or over 720p) of Component and HDMI. MENU → , → ENTER → , → ENTER → , → ENTER Adjusting the LCD Display
Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and a\ djust to create optimum contrast. 1. Off 2. On MENU → , → ENTER → , → ENTER → , → ENTER Digital NR (Digital Noise Reduction) Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On MENU → , → ENTER → , → ENTER → , → ENTER Adjusting the LCD Display
Film Mode The Film Mode feature offers you a theater-quality viewing experience. (Not available in HDMI Mode) 1. Off 2. On MENU → , → ENTER → , → ENTER → , → ENTER PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP ON 1. Contrast Adjusting the LCD Display
Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. MENU → , → ENTER → , → ENTER → , → ENTER → , → ENTER Sound Available Modes • PC / BNC / DVI • AV • S-Video • Component • HDMI • MagicInfo Note • The MagicInfo menu is available in DRn models. Mode The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. Adjusting the LCD Display
3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.e., news). 5. Custom Selects Custom if you want to Adjusts the settings according to your personal prefer- ences. MENU → , → ENTER → ENTER → , → ENTER Custom The sound settings can be adjusted to suit your your personal preference\ s. 1. Bass Emphasizes low frequency audio. 2. Treble Emphasizes high frequency audio. 3. Balance Allows you to Adjusts the sound balance between the left and right speak\ ers. Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. MENU → , → ENTER → , → ENTER → , → ENTER → , → ENTER Adjusting the LCD Display