Schwinn Journey 45 Manual

270 /
230 /
430 /
470 /
2.5
ASSEMBLY MANUAL / OWNER’S MANUAL  
Manual en Espa\361ol Latino Americano:
http://www  

2
Important Safety Instructions - Assembly   3
  Safety Warning Labels / Serial Number    4
  Grounding Instructions   5
Specifications	 	 6
Before	 Assembly	 	 6
Parts   7
Hardware   8
Tools   8
Assembly   9
Moving the Machine   21
Leveling the Machine   22
Important Safety Instructions    23
Features   24
  Console Features   25 Operations 
 30
 Adjustments   30
  Power Up / Idle Mode   30
  Quick Start Program   31
	 User	Profiles	 	 31
  Pausing or Stopping   37
  Results / Cool Down Mode   37
  GOAL...

3
ImporTanT safeTy InsTruCTIons
-assembly
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions. Read and understand the complete Manual. Keep 
the Manual for future reference.
To reduce the risk of electrical shock or unsupervised usage of the equipmen\
t, always unplug this machine 
from the electrical outlet...

4
safeTy WarnIng labels and serIal 
number
FCC Compliance
!Changes	or	modifications	to	this	unit	not	expressly	approved	by	the	party	responsible	for	compliance	could	void	the	
user’s authority to operate the equipment.
The	machine	and	power	supply	comply	with	part	15	of	the	FCC	rules.	Operation	is	subject	to	the	following	two	conditions: 	
(1)	This	device	may	not	cause	harmful	interference,	and	(2)	this	device	must	accept	any	interference	received,	including	
interference that may cause undesired...

5
Grounding Instructions
This	product	must	be	grounded.	If	it	should	malfunction	or	breakdown,	grounding	provides	a	path	of	least	resistance	for	
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding 
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded 
in accordance with all local codes and ordinances.
Improper	connection	of	the	equipment-grounding	conductor	can...

6
speCIfICaTIons
Before Assembly 
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a 
hard,	level	surface.	Allow	a	workout	area	of	a	minimum	76.2”	x	118.1”	(193.4	cm	x	300	cm).	Be	sure	that	the	workout	space	
you	are	utilizing	has	adequate	height	clearance,	taking	into	consideration	the	height	of	the	user	and	the	maximum	incline	of	
the elliptical machine.
Basic Assembly Tips
Follow	these	basic	points	when	you	assemble	your	machine:
•...

7
A	decal	has	been	applied	to	all	right	(“	R ”)	and	left	(“	L ”)	parts	to	assist	with	assembly.
ItemQtyDescription ItemQtyDescription
1 1Console Mast 121Upper	Shroud
2 1Static	Handlebar 131Front Stabilizer
3 1Arm Pivot Rod 142Handlebar	Shroud,	Inner
4 1Water	Bottle	Holder 152Handlebar	Shroud,	Outer
5 1Console 161Right Leg
6 1Upper	Left	Handlebar	Arm 171Right Pedal
7 1Lower	Left	Handlebar	Arm 181Shroud Cap
8 1Left Pedal 191Lower	Right	Handlebar	Arm
9 1Rail Assembly 201Upper	Right	Handlebar	Arm
10 1Left...

8
ItemQtyDescription ItemQtyDescription
A 6Button	Head	Hex	Screw,	M8x16	(with	
Loctite
® adhesive) F
6
Wave Washer 
B 4Flat	Washer,	M8 G12
Lock Washer,	M8
C 8Wide	Washer,	M8 H2
Pivot Sleeve
D 4Button	Head	Hex	Screw,	M8x16
I4
Phillips	Head	Screw,	M5x12
E 2Hex	Head	Screw,	M8x20
HardW
are / Tools
To o l s
Included      Not Included
6 mm (recommended)
A
B C DEF
GH
I
#2
13	mm
15 mm
19	mm  

9
assembly
1.  Attach Front Stabilizer to Frame
 Note:			Hardware	is	pre-installed	and	not	on	the	Hardware	Card.	*
13
11
6mm
**X4
*  

10 2.  Attach Rail Assembly to Frame Assembly 
 Note:			Hardware	is	pre-installed	and	not	on	the	Hardware	Card.	*