Stihl Ms230c Manual

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
59
Cooling inlets CleanX
Cylinder fins CleanXX
CarburetorCheck idle adjustment – chain must not rotateXX
Readjust idleX
Spark plugReadjust electrode gapX
Replace after 100 hours of operation
All accessible screws and nuts (not adjusting 
screws) 
2)RetightenX
Spark arresting screen in muffler (not all markets)Check
1)X
Clean, replace if necessary
1)X
Chain catcherCheckX
ReplaceX
Safety labels ReplaceX
1)STIHL recommends a STIHL servicing...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
601Carburetor Box Cover Twist Lock
2Carburetor Adjusting Screws
3Fuel Pump
1)
4Decompression Valve 
(Automatically Resetting)1)
5Chain Brake
6Muffler
7Chain Sprocket
8Chain Sprocket Cover
9Chain Catcher
10Side Chain Tensioner
1)
11Front Chain Tensioner1)
12Guide Bar
13Oilomatic Saw Chain
14Adjusting Wheel for Quick Chain 
Tensioner
1)
15Handle of Wingnut (Quick Chain 
Tensioner1))
16Oil Filler Cap
17Bumper Spike
18Front Hand Guard
19Front...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
61
Definitions
1 Carburetor Box Cover Twist Lock
Lock for carburetor box cover.
2 Carburetor Adjusting Screws
For tuning the carburetor.
3 Fuel Pump
Provides additional fuel feed for a 
cold start.
4 Decompression Valve 
(Automatically Resetting)
Releases compression pressure to 
make engine starting easier – when 
activated.
5Chain Brake
A device to stop the rotation of the 
chain. Is activated in a kickback 
situation by the operator's...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
62
EPA / CEPA
The Emission Compliance Period 
referred to on the Emissions 
Compliance Label indicates the number 
of operating hours for which the engine 
has been shown to meet Federal 
emission requirements.
Category
CARB
The Emission Compliance Period used 
on the CARB-Air Index Label indicates 
the terms:
Engine
STIHL single cylinder two-stroke engineMS 210, MS 210 C
MS 230, MS 230 C
MS 250, MS 250 C
Ignition System
Electronic magneto...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
63 Cutting Attachments for MS 210, 
MS 210 C, MS 230, MS 230 C
Recommended cutting attachments 
complying with Section 5.11 of 
ANSI B 175.1-2000.
Observe notes on ANSI B 175.1-2000 
and definition of "low kickback chain" in 
chapter on "Safety Precautions and 
Working Techniques".
Rollomatic E 3/8" guide bars
3/8" P chain
Chain sprocket
Cutting Attachments for MS 250, 
MS 250 C
Recommended cutting attachments 
complying...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
64 Contact your STIHL dealer for 
information regarding special 
accessories that may be available for 
your product.Please enter your saw model, serial 
number as well as the part numbers of 
the guide bar and saw chain in the 
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject 
to normal wear and tear. When 
purchasing these parts, always quote 
the saw model, the part numbers and 
names of the...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
65 Observe all country-specific waste 
disposal rules and regulations.
STIHL products must not be thrown in 
the garbage can. Take the product, 
accessories and packaging to an 
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for 
the latest information on waste disposal.Allocation of STIHL Incorporated 
warranty declarations on compliance 
with emission requirements for the 
following models:...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
66
Manufacturer's Warranty Coverage
In the U.S., 1997 and later model year 
small off-road equipment engines are 
warranted for two years. If any emission-
related part on your engine is defective, 
the part will be repaired or replaced by 
STIHL Incorporated free of charge.
Owner's Warranty Responsibilities
As the small off-road equipment engine 
owner, you are responsible for the 
performance of the required 
maintenance listed in...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
67 damages to other engine components 
caused by the failure of a warranted part 
still under warranty.
The following list specifically defines the 
emission-related warranted parts:
–Air Filter
–Carburetor (if applicable)
–Fuel Pump
–Choke (Cold Start Enrichment 
System) (if applicable)
–Control Linkages
–Intake Manifold
–Magneto or Electronic Ignition 
System (Ignition Module or 
Electronic Control Unit)
–Fly Wheel
–Spark Plug
–Injection...

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
68 Manufacturer’s Warranty 
Responsibilities
This emissions control system is 
warranted for two years in California. If 
any emissions-related part on your 
equipment is defective, the part will be 
repaired or replaced by STIHL 
Incorporated free of charge.
Owner’s Warranty Responsibilities
As the small off-road equipment engine 
owner, you are responsible for 
performance of the required 
maintenance listed in your instruction 
manual. STIHL...