TomTom Blue And Me 2 Manual

31 
 
 
 
When the correct streetname appears in the list, tap the name to select the destination. 
 
6. Enter the house number, then tap Done. 
 
7. The location is shown on the map. Tap Select to continue or tap Back to enter another ad-
dress. 
Tip: If you want your final destination to be a car park, tap Park nearby and select a location 
from the list of car parks close to your general destination. 
 
8. When the new route is shown, tap Done. 
For more information about the route, tap Details.  

32 
 
 
 
To plan a different route, tap Change route. 
 
Your Blue&Me-TomTom 2 starts to guide you to your destination, using spoken instructions and 
onscreen directions.  
Route summary 
The route summary shows an overview of your route, the remaining distance to your destination 
and the remaining estimated journey time. 
To view the route summary, tap the right-hand panel on the status bar in the Driving view or tap 
View route in the Main menu and then tap Show route summary. 
If you have a TomTom...

33 
 
 
 
To view LIVE summary information, tap the LIVE tab on the route summary screen. Tap any of the 
panels for more detailed information. 
 
The LIVE tab panels show the following information: 
 Traffic on route - tap this panel to view detailed information about traffic delays and other 
incidents on your route. 
 Speed cameras - tap this panel to open the Speed Camera menu. You can then report a speed 
camera or change your settings for speed camera warnings. 
 Weather - tap this panel to view...

34 
 
 
 
 Bicycle route - a route designed for making the journey on a bicycle.  
Frequent destinations 
If you often make trips to the same destinations, you can set your Blue&Me-TomTom 2 to ask if 
you want to plan a route to one of these locations every time the device starts. This is faster than 
planning a route in the normal way. 
To select a new destination, tap Start-up settings in the Settings menu and select Ask for a des-
tination. Select a button to use for this destination and answer the...

35 
 
 
 
Tap YES to enter a preferred arrival time. 
Your Blue&Me-TomTom 2 calculates your arrival time and shows you whether you will arrive on 
time. 
You can also use this information to work out when you need to leave. If your Blue&Me-TomTom 
2 shows that you will arrive 30 minutes early, you can wait and leave in 30 minutes time, rather 
than arrive early. 
Your arrival time is constantly recalculated during your journey. The status bar shows whether you 
will arrive on time or if you are going to...

36 
 
 
 
 
Recent destination  
Tap this button to select your destination from a list of places you have 
recently used as destinations. 
 
Point of Interest  
Tap this button to navigate to a Point of Interest (POI). 
 
Postcode  
Tap this button to enter a postcode as a destination. 
In some countries, the postcode can be used to identify the place and 
street. In other countries, the postcode only identifies the place, so you 
need to enter the street name separately. 
 
Point on map  
Tap this...

37 
 
 
 
 Check a route for someone who is coming to visit you and then explain the route to them in 
detail. 
To plan a route in advance, follow these steps: 
1. Tap the screen to bring up the Main menu. 
2. Tap the arrow button to move to the next menu screen and tap Plan route. 
 
This button is shown while there is no planned route on your Blue&Me-TomTom 2. 
3. Select the starting point for your journey in the same way that you would select your destina-
tion. 
4. Set the destination for your...

38 
 
 
 
 
Show route demo  
Tap this button to watch a demo of the journey. You can interrupt the 
demo at any time by tapping the screen. 
 
Show route sum-
mary  
Tap this button to open the route summary screen. 
 
Show destination  
Tap this button to see a preview of your destination. 
You can navigate to a car park near your destination, and view any 
available information about your destination, for example, the phone 
number. 
 
Show traffic on 
route  
Tap this button to see all the traffic...

39 
 
 
 
Voice control 
There are two types of voice control. 
The first type is provided by Blue&Me and you can use it to control Blue&Me features. You do this 
using a button on your steering wheel. 
The second type is provided by your navigation device and you can use it to plan routes and con-
trol other features of your navigation device. You do this by initially tapping the screen on the 
navigation device.  
About navigation device voice control 
Note: Voice control is not supported on all...

40 
 
 
 
2. When you hear Say a command followed by a tone, say a command of your choice. For 
example, you can say Drive home. Your Blue&Me-TomTom 2 is only ready to listen after 
your hear the tone. 
While you are speaking the microphone monitor shows how well the device can hear your 
voice: 
  
 
 
A green bar means the device can hear your voice. 
A red bar means your voice is too loud for the device to recognise 
individual words and understand everything you say. 
A grey bar means your voice is...