TomTom Blue And Me 2 Manual

41 
 
 
 
Your Blue&Me-TomTom 2 shows a list of towns which sound similar to what you said and tells 
you which town is at the top of the list. 
 
If the town you hear is the same as the town you requested then say, Done or OK or Yes 
or One or tap the town at the top of the list. 
If the town you hear is incorrect, but the correct town is in the list, say the number next to the 
correct town or tap the name of the town. 
For example, if the correct city is Rotterdam and this town is shown at the third...

42 
 
 
 
Numbers should be pronounced in the same way you normally say a number, in one contin-
uous sentence. So 357 is pronounced, Three hundred and fifty seven. 
If the number is shown correctly then say, Done or OK or tap the keyboard to enter the 
number. 
If the number is shown incorrectly then say, Back or No or tap the Backspace key and re-
peat the number. 
Tip: If you say, Back when there are no numbers on the screen, your Blue&Me-TomTom 2 
will return you to the previous screen. 
When the...

43 
 
 
 
About the Driving View 
When your Blue&Me-TomTom 2 device starts for the first time, you are shown the Driving View 
along with detailed information about your current position. 
Tap the centre of the screen at any time to open the Main Menu. 
You can choose the screen shown when you switch on your device by tapping Settings in the 
Main Menu, then tapping Start-up settings. 
  
The Driving View 
 
1. Zoom button - tap the magnifying glass to show buttons for zooming in and out. 
2. Quick menu...

44 
 
 
 
Tap this part of the status bar to repeat the last voice instruction and to change the volume. 
You can also tap here to mute the sound. 
11. The remaining journey time, the remaining distance and your estimated arrival time.  
Tap this part of the status bar to open the Route Summary screen. 
To change the information shown in the status bar, tap Status bar in the Settings menu.  
Driving View Symbols 
 
  
Mobile phone not connected - this symbol is shown only when naviga-
tion device is not...

45 
 
 
 
About lane guidance 
Note: Lane guidance is not available for all junctions or in all countries. 
Your Blue&Me-TomTom 2 helps you prepare for motorway exits and junctions by showing the 
correct driving lane for your planned route. 
As you approach an exit or junction, the lane you need is shown on the screen.  
Using lane guidance 
There are two types of lane guidance: 
 Lane images 
 
To turn lane images off, tap Settings in the Main Menu, then tap Advanced settings. Clear the 
checkbox for...

46 
 
 
 
Making changes to your route 
After you plan a route, you may want to change the route or even the destination. There are vari-
ous ways to change your route without the need to completely replan the entire journey. 
To change the current route, tap Change route in the Main menu: 
 
Change route 
 
 
Tap this button to change the current route. 
This button is only shown while there is a planned route on your 
Blue&Me-TomTom 2. 
  
Change route menu 
To change the current route or your...

47 
 
 
 
TomTom traffic information services, go to tomtom.com/services. 
 
Change destination  
Tap this button to change the current destination. 
When you change the destination, you are shown the same options and 
asked to enter the new address in the same way as when you plan a new 
route. 
 
Avoid part of route  
Tap this button to avoid part of the current route. 
You are shown a list of the street names on your route. When you tap 
one of the street names, your Blue&Me-TomTom 2 calculates a...

48 
 
 
 
About viewing the map 
You can view the map in the same way as you might look at a traditional paper map. The map 
shows your current location and many other locations such as Favourites and POIs. 
To view the map in this way, tap View map or View route in the Main menu. 
You view different locations on the map by moving the map across the screen. To move the map, 
touch the screen and drag your finger across the screen. If your device supports gestures, you can 
also zoom in and out by...

49 
 
 
 
Tap the button in the streetname balloon to open the cursor menu. You can navigate to the 
cursor position, make a Favourite of the cursor position, or find a Point of Interest near the 
cursor position. 
6. The Find button 
Tap this button to find specific addresses, favourites or Points of Interest. 
7. The zoom bar 
Zoom in and out by moving the slider.  
Options 
Tap the Options button to set the information shown on the map and show the following infor-
mation: 
 Traffic - select this...

50 
 
 
 
 
View location  
Tap this button to view information about the location on the map such 
as the address. 
 
Set marker posi-
tion  
Tap this button to create your own green marker and place it at the cur-
sor position. 
If a green marker exists, this button changes to Delete marker. 
 
Find POI nearby  
Tap this button to find a POI near the cursor position on the map. 
For example, if the cursor currently highlights a restaurant location on 
the map, you can search for a nearby parking...