TomTom Blue And Me 2 Manual

51 
 
 
 
About TomTom Map Share™ 
TomTom Map Share helps you correct map errors. You can correct several types of map error. 
To make corrections to your own map, tap Map corrections in the Services menu. 
Note: TomTom Map Share is not available in all regions. For more information, go to 
tomtom.com/mapshare. 
 
Correcting a map error 
Important: For safety reasons, do not enter the full details of a map correction while you are driv-
ing. Mark the location of the map error instead and enter the full...

52 
 
 
 
it on the map. 
The street you select is highlighted and the cursor shows the name 
of the street. 
4. Tap Done. 
Your device shows the street and whether the traffic is blocked or al-
lowed in each direction. 
 
5. Tap one of the direction buttons to block or unblock the flow of traffic 
in that direction. 
6. Tap Done. 
 
Reverse traffic 
direction  
Tap this button to correct the traffic direction of a one-way street, where 
the direction of traffic is different to the direction shown on...

53 
 
 
 
 
Change road speed  
Tap this button to change and report the road speed limit. 
 
Add or remove 
roundabout  
Tap this button to add or remove a roundabout. 
 
Add missing POI  
Tap this button to add a new Point of Interest (POI). 
For example to add a new restaurant near to your current location: 
1. Tap Add missing POI. 
2. Tap Restaurant in the list of POI categories. 
3. Tap Near you. 
4. Select the location of the missing restaurant. 
You can select the location by entering the address...

54 
 
 
 
 
Missing street  
Tap this button to report a missing street. You have to select the start 
and end points of the missing street. 
 
City  
Tap this button to report an error about a city. You can report the follow-
ing types of error: 
 City is missing 
 Wrong city name 
 Alternative city name 
 Other 
 
Motorway en-
trance/exit  
Tap this button to report an error about a motorway entrance or exit. 
 
Postcode  
Tap this button to report an error about a postcode. 
 
Other  
Tap this...

55 
 
 
 
About sounds and voices 
Your Blue&Me-TomTom 2 device uses sound for some or all of the following: 
 Driving directions and other route instructions 
 Traffic information 
Note: To use a TomTom traffic information service, you may need a subscription or a re-
ceiver. Traffic services are not supported in all countries or regions. For more information, 
visit tomtom.com/services. 
 Warnings that you set 
 Hands-free phone calls 
There are two types of voice available for your device: 
...

56 
 
 
 
Tap Settings in the Main menu, then tap Volume settings and move the slider to adjust the 
volume. Tap Test to listen to the new volume level.  

57 
 
 
 
About Settings 
You can change the way your Blue&Me-TomTom 2 looks and behaves. Most of the settings on 
your device can be accessed by tapping Settings in the Main Menu.  
2D/3D settings 
 
2D/3D settings 
 
 
Tap this button to set the default view of the map. To switch between 2D 
and 3D views while driving, tap the centre part of the status bar in Driv-
ing View. 
It is sometimes easier to view the map from above, such as when navi-
gating a complex road network. 
The 2D view shows a two...

58 
 
 
 
 Enable automatic zooming in 3D view 
 Show lane images - when this setting is selected, a graphical view of 
the road ahead shows which lane you need when you approach a 
junction or motorway exit. This feature is not available for all roads. 
 Automatically adjust clock for time zone 
  
Battery saving settings 
 
Battery saving 
settings 
 
 
To change the power saving settings, tap this button on your 
Blue&Me-TomTom 2. 
  
Brightness settings 
 
Brightness settings 
 
 
Tap this button...

59 
 
 
 
Change language 
 
Change language 
 
 
Tap this button to change the language used for all the buttons and 
messages you see on your Blue&Me-TomTom 2. 
You can choose from a wide range of languages. When you change the 
language, you are also given the opportunity to change the voice. 
  
Change map colours 
 
Change map col-
ours 
 
 
Tap this button to select the colour schemes for day and night map col-
ours. 
Tap Search to search for a colour scheme by typing the name. 
  
Keyboard...

60 
 
 
 
 
To view or change an existing Favourite, tap one of the items in the list. 
To see more Favourites on the map, tap the left or right buttons. 
 
  
Manage POIs 
 
Manage POIs 
 
 
Tap this button to manage your own POI categories and locations. 
You can set your Blue&Me-TomTom 2 to let you know when you are 
near to selected POI locations. For example, you could set the device to 
let you know when you are approaching a petrol station. 
You can create your own POI categories and add your own...