Toshiba B Ex4 User Guide

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-57 
Vista/server 2008/7/Server2008R2, it is not possible to delete the printe\
r driver.  First, delete the 
printer icon from each user account, then delete the printer driver.  
 
z  Deleting the setup information configured during the preparation 
(1)  Select the “Start”, “Control Panel”, and “Add/Remove Programs”.  
Note : Log on as the user with administrative privilege.   
 
(2)  Select the “TPCL Printer Driver...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.8 Print Test
 
E2-58  
2.8 Print Test 
 
 
 
 
 
 
 
  After your operating environment has been set, perform a print test. 
 
1.
  Perform a print test by using the Printer Driver or an Issue Command. 
 
  The printer driver’s Properties screen allows you to set the  communication conditions, media size, and other printing conditions 
in accordance with your operating environment.  For details, refer to 
the  Help for the  Windows Printer Drivers  screen....

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.8 Print Test
 
E2-59  
2.8  Print Test (Cont.) 
 
  „
 When using a Strip Module or an optional Cutter Module   
It is necessary to set the issue mode,  cut/strip position, etc. on the Printer 
Driver or with TPCL (TEC Printer Command Language) in accordance 
with your printing condition.   
For details of the TPCL, refer to the  B-EX4T/EX6T Series External 
Equipment Interface Specification  stored in the CD-ROM.  
Regarding how to use the Printer Driver,...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-60  
2.9  Position and Print  Tone Fine  
Adjustment 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.9.1 Fine Adjustment 
 
 
   This section describes how to fine adju
st a print start position, cut/strip 
position, reverse feed amount, print tone, and ribbon motor torque. 
When a fine adjustment is required, follow the procedure below.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Contents of the Fine...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-61  
2.9.1 Fine Adjustment(Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   (1) FEED ADJ.  
  Print start position is shifted by fine adjusting the feed amount.  
 
 
 
 
•
 Example of Print Start Position Fine Adjustment
 
  When setting +3.0 mm 
  Compared with “+0.0mm” position, the print start  position is shifted forward. 
 
 
 
 
  When setting +0.0 mm
 
  
 
 
 
  When setting –3.0 mm
 
  Compared with “+0.0mm”...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-62  
2.9.1 Fine Adjustment(Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   (2) CUT ADJ.  
  Cut position or peel-off position is shifted by fine adjusting the feed 
amount.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•  Example of Peel-off Position Fine Adjustment 
 
  When setting +3.0 mm  
  Compared with “+0.0mm” position, the peel-off  position is shifted forward. 
 
 
 
 
  When...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-63  
2.9.1 Fine Adjustment(Cont.) 
 
 
   (3) BACK ADJ.
 
  Reverse feed amount to the next print start position is fine adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• Example of Reverse Feed Amount Fine Adjustment 
 
  When setting +3.0 mm  
  Compared with “+0.0mm” position, the print start position  after a reverse feed is shifted forward. 
 
 
 
 
  When setting +0.0...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-64  
2.9.1 Fine Adjustment(Cont.) 
 
 
 
 
 
 
 
   (4) X ADJUST 
  Print position in X-coordinate (horizont
al direction) is fine adjusted.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ABC 
 
ABC 
 
             ABC 
50.0mm
50.0mm
Top Down Printing
X 
Y 
Bottom First Printing
X 
Y
99.5mm
-99.5mm
99.4mm
-99.4mm
• Example of X Coordinate Fine Adjustment 
 
  When setting –50.0 mm  
  Compared with “+0.0mm”...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-65  
2.9.1 Fine Adjustment(Cont.) 
 
 
 
 
 
 
 
 
   (5) TONE ADJ.(TRANS.) 
  Print tone for the thermal transfer printing is fine adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(6) TONE ADJ.(DIRECT.) 
  Print tone for the direct thermal printing is fine adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(7) RBN ADJ. 
  When the ribbon is slack or wri
nkled and printing is affected, fine 
adjust the ribbon motor torque....

2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.9 Position and Print Tone Fine Adjustment
 
E2-66  
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   (8) RBN ADJ. 
  When the ribbon is slack or wri
nkled and printing is affected, fine 
adjust the ribbon motor torque.  
 
 
 
 
 
 
 
 
 
(9) THRESHOLD  
  When you perform a threshold setting for the reflective sensor and found 
the threshold needs to be adjusted, set a fine adjustment value.   
This menu is...