Toshiba B Ex4 User Guide

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-47 
 
(15) When the “Completing the Add Printer Wizard” is 
displayed, click the [Finish] button. 
 
 
 
 
 
 
 
 
(16) When the screen on the right appears, click the  [Continue Anyway] button.   
Note : “Digital Signature Not Found” message 
may be displayed.  In that case, click the 
[Yes] button.   
 
 
 
 
 
 
(17) Installation of the printer driver starts.  
(18) When the installation is completed, a new pr inter icon will be added to the “Printer” folder. 
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-48 
2.7.6  Installation under Windows Vista/Server2008/7/Server2008R2 
(1)  Turn on the PC.  Note : Log on as the user with administrative privilege. 
   
(2)  Select “Start”, “Control Panel”, “Hardware a nd Sound”, and “Printer” to open the printer folder. 
Supplement :  Entering “Printer” in the Search box of the  Start menu causes the “Printer” to be shown in 
the Program.  
 
(3)  Click the “Install a Printer” to start adding a printer.  
 
(4)  Select the “Add a local printer”.   
 
 
 
 
 
 
 
 
 
(5)  Select a printer port, and click the [Next] button.  
 
 
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-49 
(6)  When the screen on the right appears, select  
  “TEC” from the Manufacturer list.   
 
 
 
 
 
 
 
 
(7)  The list of the installable printer models are  displayed.  
   
 
 
 
 
 
 
(8)  Select a model to be installed, then click the [Next] button.  
 
(9)  Select the “Replace the current driver”, and click  the [Next] button.  
Supplement : This step will be omitted when the 
printer driver is installed for the first 
time. 
 
 
 
 
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-50 
 
(10) Select whether or not to use the printer as a default  printer, then click the [Next] button.  
  
 
 
 
 
 
 
(11) Installation starts. 
 
(12) When the installation is completed, the “Add  Printer” screen is displayed.  At this time, a new 
printer icon is added to the “Printer” folder.  Click 
the [Finish] button.   
If you want to perform a print test, click the [Print 
a test page] button.   
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-51 
2.7.7  Installation under Windows 2000 (USB with Plug & Play Enabled) 
(1)  Turn on the PC.   Note : Log on as the user with administrative privilege. 
   
(2)  Turn on the printer and connect it to the PC with a USB cable.  
 
(3)  “USB DEVICE” is detected and “USB Pr int support” is automatically installed.  
 
(4)  After a while, the “Found New Hardware Wizard”  is displayed.  Click the [Next] button.   
 
 
 
 
 
 
 
 
 
(5)  Select the “Search for a suitable driver for my  device (recommended)”, and click the [Next] 
button.  
 
 
 
 
 
 
 
 
(6)  Check the “Specify a location” checkbox, then  click the [Next] button.  
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-52 
(7)  Click the [Browse] button.  Specify the folder  
  (C:\TEC_DRV) created in Section 2.7.4, and click 
the [Next] button.  
 
 
 
 
(8)  Make sure the driver of this device has been  detected, then click the [Next] button.  
   
 
 
 
 
 
 
(9)  When the screen on the right is displayed, click the  [Yes] button.  
   
 
 
 
 
 
 
(10) When the “Completing the Found New  Hardware Wizard” is displayed, click the 
[Finish] button.  
 
 
 
 
 
 
 
(11) When the installation is completed, a new  printer icon is added to the Printer folder.  
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-53 
2.7.8 Installation under Windows XP/Server2003 (USB with Plug & Play enabled) 
(1)  Turn on the PC.  Note : Log on as the user with administrative privilege.   
 
(2)  Turn on the printer, and connect it to the PC with a USB cable.    
 
(3)  “USB DEVICE” is detected, and the “USB  Print Support” is automatically installed.  
 
(4)  After a while, new devices are detected.    
(5)  When the “Found New Hardware Wizard” is  displayed, select “Install from a list or specific 
location [Advanced]” and click the [Next] button.  
   
 
 
 
 
 
(6)  Select the “Search for  the best driver in these 
locations”, check the “Include this location in the 
search” checkbox, and click the [Browse] button.  
Specify the folder (C:\TEC_DRV) created in 
Section 2.7.4 , and click the [Next] button.  
 
 
 
 
 
 
(7)  When the screen on the right appears, click the 
[Continue Anyway] button.  
 
 
 
 
 
 
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-54 
(8)  When the “Completing the Found New Hardware  
  Wizard” is displayed, click the [Finish] button.  
 
 
 
 
 
 
 
(9)  When the installation is completed, a new  printer icon is added to the Printer folder.  
   
2.7.9  Installation under Windows Vista/Server 2008/7/Server2008R2 (USB with Plug & 
Play Enabled) 
(1)  Turn on the PC.  
Note : Log on as the user with administrative privilege.   
 
(2)  Turn on the printer and connect it to the PC with a USB cable.  
 
(3)  Installation of the device driver software is automatically started.   
 
(4)  After a while, the printer driver installation is completed.  
 
(5)  When the installation is completed, a new  printer icon is added to the Printer folder.  
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-55 
2.7.10  Uninstalling the Printer Driver 
1) To delete the printer drivers except for V6.5 Build75 and V6.5 Build77 In the following cases, be sure to uninstall the  printer driver using the procedure below.  
• When the same version is installed again.  
• When an older version has been already installed.  
• When the installation is canceled on the way or when th e [No] is selected at a confirmation of the digital 
signature. 
• When the printer driver cannot be installed for some reason.  
 
Notes :  1.  When installing the printer driver with Pl ug & Play enabled, turn OFF the printer first.  
  2  When the printer driver is deleted, the informa tion of the registered stocks and bar codes are also 
deleted.  This information can be saved in  a file beforehand by using the export function, and 
restored by using the import function after re-installation of the printer driver.   
 
z Deleting the printer drivers except for V7.2 M-2 
Before deleting the printer driver except for  V7.2 M-2, follow the procedure described in  Section 2.7.4 
Preparation for Installation .  Doing this causes the previously insta lled printer driver to be updated and 
creates the shortcut of the Driver Wizard in the TPCL Printer Driver of TOSHIBA TEC folder.    
However, it is not possible to update the printer driver  which is older than V6.9.3 M-0.  For such versions, 
first delete “C:\TEC_DRV” folder, then conduct the Prep aration for Installation.  When the preparation is 
completed, the shortcut of the “Driver Wizard”  is created in the TPCL Printer Driver folder.  
  
z How to uninstall the printer driver  
(1)  Select the “Start”, “All programs”, “TOSHIBA 
TEC”, “TPCL Printer Driver”, and “Driver 
Wizard”. 
Note: Log on as the user with administrative 
privilege.  
Exit the all Windows applications before 
performing the above operation.  Confirm 
that there is no print job in the spooler, then 
close the spooler and the printer folder.  
In the case of Windows Vista/Server 
2008/7/Server2008R2, the User Account Control 
screen may appear.  In that case, click the [Allow].  
   
(2)  Select the “Remove printer drivers”, and click  the [Next] button.  
 
 
 
  
						

							
2. PRINTER SETUP ENGLISH VERSION EO1-33089 
2.7 Installing the Printer Drivers
 
 
E2-56 
 
(3)  Select the “Automatically remove all TEC Printer Drivers”, and click the [Next] button.  
 
 
 
 
 
 
 
(4)  Click the [Finish] button to start to delete the  printer drivers.  
 
 
 
 
 
 
 
 
(5)  When the “Restart System” screen is displayed,  click the [Restart] button.  
 
 
 
 
 
 
 
 
 
(6)  When the printer driver is deleted successfully, the 
screen on the right is displayed.   
Note : If the deletion of the printer driver failed, 
retry from Steps 1 to 5 until the deletion 
succeeds.    
 
 
 
 
 
Note : In the case a network printer has been in stalled in multiple user accounts under Windows