Toshiba D-rw2 Manual

							21
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN



Disc  
Finalize
Disc Protect OFF    ON Format
2
3
11
2
3
CD Playback Mode
Program Play Random Play
Slide Show  5 sec.
4
5
4
4
46 5
Disc
Finalize Format
1
2
1
2
1. Format (DVD-RW only):
Allows you to erase all of the recorded content on 
the disc.
The disc will be completely blank.
• Erased content cannot be called back.
• A DVD-RW disc formatted with this unit cannot be 
used in other DVD recorders without any recording 
using this unit. 
• If you want to use a disc only formatted with this 
unit on another DVD recorder, you have to re-
format the disc on that recorder.
2. Finalize:
Allows you to finalize a disc containing recorded 
titles.
3.  Disc Protect (VR mode only):
Allows you to protect a disc from accidental editing 
or recording.
4. Random Play:
To activate the random  playback feature.
5.  Program Play (Audio CD only):
To activate the programmed playback feature.
6.  Slide show (JPEG only):
Select the display time.
*OUSPEVDUJPO@6%JOEE


*OUSPEVDUJPO@6%JOEE








 
						

							*OUSPEVDUJPO@6%JOEE


*OUSPEVDUJPO@6%JOEE








 
						

							Connections
Connect your recorder to your TV or stereo system.
● Connection to a TV
● RF modulator Connection
● Connection to a cable box or satellite 
box
● Connection to an Audio System
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							24
Connections
EN
Connection to a TV
ANTENNAAUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(L1)
IN
IN
OUTOUTS-VIDEOCOMPONENT
VIDEO OUTPUTLY
PB/CB
PR/CRR
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO IN VIDEO
3
21
45
6
Cable
TV signal
orAntenna
(Back of TV)
Disconnect
Cable
TV signal
orAntenna
(Back of TV)
ConnectConnect
RF cable 
(supplied)Connect
Video 
cable 
(supplied)Connect
Audio 
cable 
(supplied)
(Back of this unit)
Plug in the AC power cord of this unit.
Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.
Note
• RF output is for tuner pass through only.  DVD Playback through the RF is not possible.  Please see the next page for 
connection options.
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							25
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Make one of the following connections, depending on the capabilities of 
your existing equipment.
S-VIDEO IN
OUTS-VIDEO
PB/CB
Y
P
R/CR
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUTPUT
Y
PB/CB
PR/CR
ANTENNAAUDIO IN
VIDEO INL
R
AUDIO OUTVIDEO OUT
(L1)
ININOUTOUTS-VIDEOCOMPONENT
VIDEO OUTPUTLYPB/CBPR/CRRCOAXIAL
RL
AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
TVBasic Audio
Method 1Method 2
Better picture Best picture
S-VIDEO OUTCOMPONENT VIDEO  OUT
Audio cable
(supplied)S-Video cable
(commercially available)
Component Video cable
(commercially available)
This unit
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on 
the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check 
your TV owner’s manual for details. 
Notes
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy 
protection system.
• When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT 
jack.
• This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images 
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
To set progressive scan mode, refer to page 141.
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							26
Connections
EN
RF modulator Connection
TO TV CHANNEL VIDEO INAUDIO IN
RL 34ANT INAC 120V
ANTENNAAUDIO IN
VIDEO IN
L
R
AUDIO OUTVIDEO OUT
(L1)
ININOUTOUTS-VIDEOCOMPONENT
VIDEO OUTPUTLYPB/CBPR/CRR
AntennaCable TV 
signal(Back of this unit)
RF cable 
(supplied)Set channel 3 or 4.
STEREO AUDIO/VIDEO 
RF Modulator 
(commercially available)Audio/Video cables 
(supplied)
Antenna in jack
RF cable (commercially available)Turn on your TV 
and select channel 
3 or 4.(Back of TV) If your TV has Antenna in jack only, it is still possible to connect this unit to your TV by using a Stereo Audio/Video RF 
modulator. In this case, follow the instructions below. 
1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, 
and then connect the RF cable to the ANTENNA IN jack of this unit.
2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.
3) Connect your RF modulator to your TV by another RF cable.
4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by 
Audio/Video cables.
5) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If 
your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.
6) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
  For more details, follow the instructions supplied with the RF modulator.
Note
•  The quality of picture may become poor if this unit is connected to an RF modulator.
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							27
Connections
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
ANTENNAAUDIO IN
VIDEO IN
L
R
AUDIO OUT
(L1)
ININOUTOUTS-VIDEOCOMPONENT
VIDEO OUTPUT
LY
PB/CB
PR/CRR
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO IN VIDEO
INOUT
CableTV 
signal(Cable box or 
Satellite box) 
RF cable
ConnectConnect
RF cable 
(supplied)(Back of TV)
Connect
Video 
cable 
(supplied)
(Back of this unit)Connect
Audio cable 
(supplied)
Connection to a cable box or satellite box
■ With this setup:
• You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure that 
the cable box or satellite box is turned on.
• You cannot record one channel while watching another channel.
Note to the Cable TV System Installer : 
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, 
which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the 
grounding system of the building, as close to the point of cable entry as possible.
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							28
Connections
EN
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
ANTENNAAUDIO IN
VI D EO I N
L
R
(L1)
ININOUTOUTS- V I D EOCO M PO N EN T
VIDEO OUTPUTY
PB/CB
PR/CR
DIGI TAL AUPCM  /  BIT
COAXIAAU DIO OUT
VI D EO OUT
L
R
Stereo system
AUDIO
Analog audio 
input jacks
Audio cable 
(supplied)
AUDIO OUT
Method 1
Note
•  Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Method 2
Dolby Digital decoder, DTS decoder, 
MD deck or DAT deck
ANTENNAAUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(L1)
ININOUTOUTS-VIDEOCOMPONENT
VIDEO OUTPUTLY
PB/CB
PR/CRR
DIG ITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
COAXIALDigital audio 
input jack
Audio Coaxial 
Digital cable 
(commercially 
available)
DIGITAL AUDIO OUT
Setting Setup >Playback >Audio >Digital Out >
Connection
PCM Dolby Digital DTS
If output is Dolby Digital encoded audio, connect to a Dolby 
Digital decoder.— STREAM OFF
If output is DTS encoded audio, connect to a DTS decoder. — PCM ON
If output is encoded audio for both Dolby Digital and DTS, 
connect to the decoder which encodes multiple audio 
sources.— STREAM ON
Connecting to an MD deck or DAT deck. — PCM OFF
If not connected to any external devices. — PCM OFF
* To complete these settings, refer to pages 135-137.
Notes
•  The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD 
or DAT deck.
•  By connecting this unit to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi-channel 
surround sound as heard in the movie theaters.
•  Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
•  By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the original 
sound as truthfuly as possible. Multi-channel Surround System is developed by the Digital Theater System Inc.
This unit
$POOFDUJPO@6%JOEE


$POOFDUJPO@6%JOEE








 
						

							Basic Setup
Read this chapter for necessary settings to get 
started.
● Initial setting
● Channel setting
● Selecting TV stereo or SAP
● Setting the clock
● Selecting TV aspect ratio
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							30
Basic Setup
EN
Initial setting
Start
Turn on this unit for the fi rst time, you need to follow 
these steps.
1
 Press [I/y ON/STANDBY].
2
  Turn the TV on. Select the input to which the 
unit is connected.
“Initial Setting” will automatically appear.
3
 Using [K / L], select your desired language 
for the on screen menu. Then press [ENTER] 
to go to next step.
Initial Setting
Français
Español English
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE