Toshiba D-rw2 Manual

							31
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
  Press [ENTER] to start Channel Preset.
The unit will start getting channels available in your area.
5
  After channel setting is finished, “Clock 
Setting” will appear. Then press [ENTER].
6
  Follow the steps 3 to 7 on pages 41-43 for 
“Manual Clock Setting”.
Initial Setting
Channel Preset
Initial Setting
Clock Setting
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							32
Basic Setup
EN
Channel setting
Setting channels automatically
Start
If you have changed antenna connection, we recommend 
you to program channels which are available in your area 
with the following procedures.
1
 Press [SETUP].
2
 Using [K / L], select “Channel”. 
Press [ENTER].
Channel menu will appear.
Setup
Playback
Display
Recording
Clock
Channel
Disc Required Setting
Setup
Playback
Display
Recording
Clock
Channel
Disc Required Setting
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							33
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Initial Setting
Clock Setting
■ To select a channel
You can select a channel by directly entering channel with  the Number buttons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99, enter channel nu\
mbers as a three-digit number.(For example:  117, press  [1], [1], [7])
• You must precede single-digit channel numbers with a zero (For example:\
 02, 03, 04 and so on).
• You can select the line input mode (“L1” or “L2”).  To sel\
ect “L1” by pressing  [0], [0], [1]. To select “L2” by pressing  [0], 
[0], [2] . Details are on pages 68-69.
Notes
• If the auto presetting is cancelled during presetting, some channels not\
 yet preset may not be received.
• The selection will depend on the number of stations that it has found.
Press [RETURN] or [SETUP] to cancel the auto presetting during scanning.\
3
 Using [ K /  L], select “Auto Preset”. 
Press [ENTER].
The unit will start presetting channels available in your area 
automatically.
4
  Press [SETUP] after scanning.
You can select only the channels memorized in this unit by 
using [CH    /    ].
Channel
Manual Preset Auto Preset
# BTJD 
T F UV Q @6 %J O EE


 #BTJD
TFUVQ@6%JOEE


  


   


 
						

							34
Basic Setup
EN
The channels you no longer receive or seldom watch can 
be deleted from the memory. You also may add channels 
into the memory.
1
 Press [SETUP].
2
 Using [K / L], select “Channel”. 
Press [ENTER].
Channel menu will appear.
3
 Using [K / L], select “Manual Preset”. 
Press [ENTER].
Manual Preset menu will appear.
Channel setting (cont’d)
StartChannel
Manual Preset Auto Preset
Adding/deleting channels
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							35
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
  Select the channel number to add or delete.
Press [{] or [CH    ] to move to a lower channel number.
Press [B] or [CH    ] to move to a higher channel number.
Press the Number buttons to select a channel number directly.
[CH    /    ] works on the memorized channel in this unit.
[{ / B] works on all channel numbers.
5
 Using [K / L], select “Add” or “Delete”. 
Press [ENTER].
The channel number will be added or deleted from the channel 
memory. Then the next channel number will appear so that you 
can continue adding or deleting channels.
6
  Press [SETUP] to exit.
Manual Preset
CH    7
Add
Delete
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							36
Basic Setup
EN
Selecting TV stereo or SAP
You can select a sound channel to output from TV.  
“Stereo” has been selected as the default.
1
 Press [SETUP].
2
 Using [K / L], select “Required Setting”. 
Press [ENTER].
Required Setting menu will appear.
3
 Using [K / L], select “TV Audio Select”. 
Press [ENTER].
Option window will appear.
Start
Select Video
TV Aspect
TV Audio SelectRequired Setting
4:3 Letter Box
Stereo
Setup
Playback
Display
Recording
Clock
Channel
Disc Required Setting
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							37
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
 Using [K / L], select “Stereo” or “SAP”. 
Press [ENTER].
            Stereo:
            Outputs main audio.
            SAP (Secondary Audio Program):
            Outputs sub audio.
5
  Press [SETUP] to exit.
TV Audio Select 
SAP Stereo
Notes on TV channel audio
•  This unit CANNOT record in both Stereo (main) and SAP 
(sub) at the same time.
•  If you want to record a TV program available in second 
audio or stereo on a DVD-RW/R, you have to select either 
Stereo or SAP in the “ TV Audio Select ” beforehand. 
Refer to the following table to check an appropriate 
setting.
•  You can only play the disc in second audio if a TV 
program is available in second audio and you set “ TV 
Audio Select ” to “ SAP ”.
Selected 
audioBroadcast audio
Disc 
Recording
Main-audio 
channelSub-audio 
channel
Stereo STEREO SAP STEREO
STEREO NONE STEREO
MONO SAP MONO
MONO NONE MONO
SAP STEREO SAP SAP
STEREO NONE STEREO
MONO SAP SAP
MONO NONE MONO 
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							38
Basic Setup
EN
Setting the clock
Set the clock before you try the Timer Recording. If a 
Public Broadcasting Station (PBS) is available in your 
area, follow “Auto Clock Setting” below. If not, follow 
“Manual Clock Setting” on page 41.
Make sure
• The antenna/Cable TV connections are correct.
• If this unit is connected to a Cable Box or Satellite Box, select the local 
PBS station on them to set the clock automatically.
1
 Press [SETUP].
2
 Using [K / L], select “Clock”. Press [ENTER].
Clock menu will appear.
3
 Using [K / L], select “Auto Clock Setting”. 
Press [ENTER].
Option window will appear.
Clock
Clock Setting
Auto Clock Setting
Daylight Saving TimeAuto
ON
Auto Clock Setting
Setup
Playback
Display
Recording
Clock
Channel
Disc Required Setting
Start
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							39
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
  If  you do not know your PBS channel 
number: Using [K / L], select “Auto”. Press 
[ENTER].
The setting will be activated.
 
  If you know your PBS channel number: 
Using [K / L], select “Manual”. Press 
[ENTER]. 
 
Using the Number buttons or [K / L], enter 
your PBS channel number. Press [ENTER]. 
The setting will be activated.
 
If you want to set the clock manually and 
cancel the Auto Clock Setting function: 
Using [K / L], select “OFF” at the step 4. 
Press [ENTER]. 
The Auto Clock Setting function will be canceled.
(Continued)
Auto Clock Setting - Manual
Set Channel No.
CH  1
Auto Clock Setting
OFF
Auto
Manual
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE








 
						

							40
Basic Setup
EN
Setting the clock (cont’d)
Notes
• The clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the 
power cord. In this case, the current time will appear on the front panel display.
• If the current time is not displayed or the displayed clock is not correct, set the clock manually.
5
  Press [SETUP] to exit.
6
 Press [I/y ON/STANDBY] to turn off the unit.
This unit will search for the time only when the power is off. 
Leave it off for several minutes to give this unit time to set the 
clock on the front panel display.
#BTJD
TFUVQ@6%JOEE


#BTJD
TFUVQ@6%JOEE