Toshiba D-rw2 Manual

							81
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
5
  Press [TOP MENU] to display the title list.
You can change “Original” or “Playlist” of  VR mode using 
[MENU / LIST].


Press [TOP MENU] to resume play.
To exit the title list, press [STOP C] or [RETURN].
(Continued)
Title List
JAN/ 1/06 1:00AM CH12 XP
456
123
Playlist
JAN/ 1/06 1:00AM CH12 XP
456
123
Original
JAN/ 1/06 1:00AM CH12 XP
456
123
[MENU / LIST]
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							82
Playback
EN
Basic playback (cont’d)
6
 Using [K / L/{ / B], select a desired title. 
Press [ENTER]. 

Pop-up window will appear.
7
 Using [K / L], select “Play”. Press [ENTER]. 
Playback will start.
8
 Press [STOP C] to stop playback. 
To eject the disc, press [OPEN/CLOSE A] to open the disc tray, 
then remove the disc before turning the unit off.
Title List
JAN/ 1/06 1:00AM CH12 XP
456
231
Notes
• For DVD-R (Video mode) and DVD-RW (Video mode) discs 
which are already finalized, a title menu will be displayed 
instead of thumbnails.
• You can resume play from where you stopped playing the 
disc. (Resume play) Refer to page 87 for details about 
resume play.
•  Some discs may start playback automatically.
•  You can also start playback by pressing [PLAY B] instead 
of [ENTER] at step 6.
Title Menu
1  JAN/22/06  12:55AM CH10
2  JAN/30/06  11:00PM CH8
3  FEB/10/06  9:00PM   CH10
4  FEB/28/06  11:00AM CH6
5  FEB/28/06  10:00PM CH8XP
XP
LP
LP
EP
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							83
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Playing back a DVD-VIDEO / CD
1
 Press [I/y ON/STANDBY].
Turn the TV on and be sure to select the input to which the unit 
is connected.
2 
 Press [OPEN/CLOSE A] to open the disc tray.
The disc tray will open.
3
  Insert your disc with its label facing up. Align 
the disc to the disc tray guide.
4
 Press [PLAY B] to start playback.
Playback will start.
If you are playing a DVD-Video disc or a menu may appear.
Refer to page 86 for details about the Disc menu.
5 
 Press [STOP C] to stop playback. 
Start
Note
•  Some discs may start playback automatically.
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							84
Playback
EN
Playing MP3, WMA, JPEG disc
Basic playback (cont’d)
1
  In stop mode, press [TOP MENU] to call up 
the menu.
•To exit the menu, press [TOP MENU] again.
2 
 Using [K / L], to select a desired folder 
(group) or track. Press [ENTER].
When selecting track: 
Playback will start.
When selecting the folder:
The files in the folder will appear.
Press [K / L] to select the track or the folder you want, then 
press [ENTER].
• Press [PLAY B], [ENTER] or [B] to move to the lower 
hierarchies.
• Press [s] or [RETURN] to the previous hierarchy.
File List
DISC NAME
A
B
1 JPEG file1
2 JPEG file2
3 MP3 file1
4 MP3  file2
5 WMA file1
6 WMA file2
1/2
WW33
Start
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							85
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Hints for MP3, WMA and JPEG files:
• Folders are known as Groups, files are known as Tracks.
• Folders are accompanied by     icon.
• MP3 files are accompanied by     icon.
• WMA files are accompanied by      icon.
• JPEG files are accompanied by      icon.
  Reproduction will start from the selected track and go to the 
next one in turn.
• The system can recognize up to 255 groups (or folders) and 
up to 999 tracks.
• The name of group and track can be displayed up to 29 
characters. Unrecognizable characters will be replaced with 
asterisks.
• If there are no files in the folder, “No Files” will be displayed.
• Call Display Menu by pressing [DISPLAY] to check track 
number and time.
• When the Display Menu is on, you can check the artist name 
tag and title tag by pressing [DISPLAY] during the WMA file 
playback or resume stop.
This unit recommends the files recorded under the 
following circumstances:

• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps (MP3), 48kbps - 192kbps 
(WMA).

• Upper limit: 6,300 x 5,100 dots.
• Lower limit: 32 x 32 dots.
• File size of image maximum: 12MB.
3
W
Notes
•  The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.
•  Files whose extension is other than “.mp3(MP3)” “.wma(WMA)” or “.jpg / .jpeg(JPEG)” will not be listed in the menu.
•  Some unplayable folders or tracks may be listed in the menu due to the recording status.
•  High-resolution JPEG files take longer to be displayed.
This product requires discs/recordings to meet certain technical standards in order to achieve optimal 
playback quality.  Pre-recorded DVDs are automatically set to these standards.  There are many different 
types of recordable disc formats (including CD-R containing MP3/WMA files).  Because this area of 
technology is still evolving, Toshiba cannot guarantee that all recordable discs will produce optimal 
playback quality. The technical criteria set forth in this owner’s manual are meant only as a guide.
You must obtain any required permission from copyright owners to download or use copyrighted content. 
Toshiba cannot and does not grant such permission.
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							86
Playback
EN
Basic playback (cont’d)
Pause
1) During playback, press [PAUSE F].
Play will pause and sound will be muted.
2) Press  [PLAY B] to resume play.
F
Playing discs using the Disc 
menu
A DVD disc contains a Disc menu that describes the 
contents or allows you to customize the playback. For 
example, the menu may offer choices for subtitle 
languages, special features, or chapter selection.
Sometimes these are displayed automatically when you 
start playback, otherwise only appear when you press 
[MENU / LIST].
1) Press [MENU / LIST].
The Disc menu will appear.
If the feature is not available,      may appear on the 
TV screen.
2) Using  [K / L / { // B], select an item. Press 
[ENTER] to confirm.
Continue this step to set up all the features you want 
or to start playing the disc from the menu.
  MENU / LIST button:
Displays a DVD Disc menu which varies with the disc 
and may be the same as the ‘Title menu.’
 Direction [K / L / { / B] buttons:
Moves the cursor around screen. ENTER button:
Selects the currently highlighted menu option. Number buttons:
Selects a numbered menu option (some discs only). 
(Press [ENTER] after inputting the desired number.)
3) Press [MENU / LIST] to exit the Disc menu.
Note
•  Menus vary among discs. Refer to the information 
accompanying the disc for details.
Playing discs using the Title menu
Some DVDs have a Title menu, which lists the titles 
available on them. It helps you to start play at a specific 
title.
1) Press [TOP / MENU].
The Title menu will appear.
If the feature is not available,      may appear on the 
TV screen.
2) Using  [K / L / { / B], select a title to play. 
Press [ENTER].
Play will begin at the title you selected.  TOP MENU button:
Displays the ‘Title menu’ of a DVD disc which varies 
with the disc.
 Direction [K / L / { / B] buttons:
Moves the cursor around screen.
 ENTER button:
Selects the currently highlighted menu option. Number buttons:
Selects a numbered menu option (some discs only). 
(Press [ENTER] after inputting the desired number.)
3) Press [TOP MENU] to exit the Title menu.
Notes
•  [TOP MENU] will not always be active with all DVDs.
•  Menus vary among discs. Refer to the information 
accompanying the disc for details.  
Step by step playback
1) During playback, press [PAUSE F].
Play will pause and sound will be muted.
2) Press  [SKIP G] repeatedly.
The play will advance one frame (or step) at a time 
when you press [SKIP G] with the sound muted.
  To play step by step backward:
Press [SKIP H] repeatedly.
Every time you press the button, the play will go 
backward by one frame.
• Press and hold 
[SKIP H / G] to reverse/ forward slow.
3) Press  [PLAY B] to resume play.
F
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							87
Playback
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Further playback
You can resume play from where you stopped playing 
the disc last.
1) During playback, press [STOP C].
The resume message will appear.
2) Press  [PLAY B].
In a few seconds, play will resume from the point at 
which it stopped last. You can resume play at the 
same point even if you turn off the unit.
To cancel the resume play and start playing the disc 
from the beginning, press [STOP C] the second time 
while the play is stopped.
Note
•  For MP3, WMA and JPEG files, playback will resume from 
the beginning of the track at which playback was stopped.
Resume ON
Rapid Play function is available only during playback.
Available only on discs recorded in the Dolby Digital 
format, Rapid Play plays back in a slightly faster/slower 
speed while keeping the sound quality just as normal 
playback.
1) During playback, press [1.3x/0.8x PLAY]
B       :
B       : 
B      :
2) Press  [PLAY B] to continue the normal 
playback.
Notes
•  Audio (language) setting cannot be changed while using 
this mode.
•  This feature may not work at some point in a disc.
•  Audio is PCM during Rapid play mode.
Press [1.3x/0.8x PLAY] once during playback.
Plays back approximately at 0.8 times of 
normal playback.
Press [1.3x/0.8x PLAY] twice during playback.
Plays back approximately at 1.3 times of 
normal playback.
Press [1.3x/0.8x PLAY] three times to play 
back in normal speed.
No effects.You can skip TV commercials by pressing 
[INSTANT SKIP], so you can enjoy the recorded 
programs without interrupting.
1) During playback, press [INSTANT SKIP].
Normal play will start at 30 seconds ahead from the 
point you press [INSTANT SKIP].
Every time you press [INSTANT SKIP], the searching 
point will be extended by 30 seconds ahead.
You can press up to 6 times (180 seconds).
e.g. Press [INSTANT SKIP] once.
(forwarding 30 seconds)
Playback will restart automatically.
B
Resume PlaySkipping TV commercials during 
play
Rapid Play
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							88
Playback
EN
1) During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E], 
approximate speed will be changed as follows. 
Fast forward or fast reverse playback across titles (for 
DVD discs) or tracks (for WMA and MP3) is not 
possible. 
For Audio CDs, approximate speed is fixed at x8 with 
sound.
For MP3 and WMA files, approximate speed is fixed 
at x8 with sound.
To return to the normal play, press [PLAY B].
Note
•  Forward/reverse speed will be indicated with icons as 
follows.
  Forward (Approx. Speed)
 x2: 
 x20: 
 x40: 
 Reverse (Approx. Speed)
 x5: 
 x20: 
 x40: 
x20Normal
speed
playbackx2 x20 x5 x40 x40
1) During playback, press [PAUSE F]. Then press 
[FWD D] or [REV E].
Every time you press [FWD D] or [REV E], 
approximate speed will be changed as follows. (The 
sound will remain muted.)
To return to the normal play, press [PLAY B].
Note
•  Slow forward/slow reverse speed will be indicated with 
icons as follows.
 Forward (Approx. Speed)
 x1/16: 
 x1/8: 
 x1/3: 
  Reverse (Approx. Speed)
 x1/16: 
 x1/8: 
 x1/4: 
x1/8Pausex1/16 x1/8 x1/16 x1/3 x1/4
Fast forward / Fast reverseSlow forward / Slow reverse
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							89
Playback
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Special playback
1) During playback, press [ZOOM].
Zoom menu will appear.
2) Using  [K / L], select a desired zoom factor to 
zoom. Press [ENTER].

There are four options 
(x1.0, x1.2, x1.5 and x2.0), these are displayed 
excluding the current zoom rate.
The zoom area will be displayed.
3) Using  [K / L / { / B], select a desired zoom 
position. Press [ENTER].
The zoom play will start.
Notes
•  When selecting a smaller factor than the current one, the 
zoom area will not be displayed.
•  To exit the zoom menu, press [ZOOM] again at step 1.
•  To cancel the zoom function, select “x1.0” using [K / L], 
then press [ENTER].
1.2
1.5
2.0
DVD-Video 1 1 0:04:01
Marker Setup
This feature allows you to assign a specific point on a 
disc to be called back later.
1) During playback, press [DISPLAY].
The Display menu will appear.
2) Using  [{ / B], select       . Press [ENTER].
Marker Setup menu will appear.
3) Using  [K / L], select a desired marker number. 
When it reaches the desired point, press 
[ENTER].

The title (track) number and the time will be displayed.
4) To return to the marker later:
Using [K / L], select the desired marker 
number. Press [ENTER].
Notes
•  To clear a marker, select the marker number to be 
cleared, then press [CLEAR].
•  All markers will be erased when you operate these 
operations listed below.
– Opening the disc tray
– Turning off the power
– Recording to a recordable disc
– Changing the mode between Original and Playlist (VR 
mode)
•  You can mark up to 6 points.
DVD-Video1 1 0:04:01
---
---
---
---
---
---123456
DVD-Video 1 1 0:04:01
Zoom
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE








 
						

							90
Playback
EN
Searching by Title, Chapter or 
Track
Using [SKIP H / G]
1) During playback, press [SKIP G] to skip the 
current title, chapter or track and move to the 
next.
The title, chapter or track will move forward by one at 
a time.
To go back to the beginning of the current title, 
chapter or track, press [SKIP H] midway.
Press it repeatedly to go to the previous title, chapter 
or track. It will move backward one at a time.
Notes
•  If there is no chapter in one title, the current title will be 
skipped.
•  For Audio CDs, MP3, WMA or JPEG files, track search is 
not available for programmed or random playback.
Using [DISPLAY]
1) During playback, press [DISPLAY].
The Display menu 
will appear.

2) Using  [{ / B], select     .  Press [ENTER].
The number next to       will be highlighted.
 Title/Track:
 Using [K / L] or the Number buttons, enter a 
desired title/track number to search. Press 
[ENTER].
Title/track search will start.
 Chapter:
Press [B] to move to the number next to       for 
chapter. 
 Using [K / L] or the Number buttons, enter a 
desired chapter number to search. Press 
[ENTER].
Chapter search will start.
001/028 00:00:00/02:18:3301 /01
Total number 
of titles
Total number 
of chaptersTotal time
Searching by Time
1) During playback, press [DISPLAY].
The Display menu will appear.

2) Using  [{ / B], select       .Press [ENTER].
The number next to       will be highlighted.
To move to the number next to       , press [B].
When time search is not available,        and time 
count are not displayed.
3) Using  [K / L] or the Number buttons, enter a 
desired time to search. Press [ENTER].
Time search will start.
Note
•  Time search function is available only in the same track or 
title.
DVD-Video1 1 0:04:01
Note
•  In search mode display, total numbers of each search 
contents (title/chapter/time) are shown as a denominator.
•  For Audio CDs, MP3, WMA or JPEG files, track search is 
not available for programmed or random playback.
1MBZCBDL@6%JOEE


1MBZCBDL@6%JOEE