Toshiba Dr410 User Manual

							21 EN21 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the owner’s manual accompanying external devices for more information.
IN OUT
Y
PR/CR
PB/CB
L
RL
R
VIDEO
INVIDEO
OUT
S-VIDEOAUDIO IN
(L1)S-VIDEOAU DIO  OU T
HDMI OUT
COMPONENT
VIDEO OUTCOAXIALDIGITAL AUDIO OPCM / BITSTR
AUDIO INRL
stereo system
audio
analog audio 
input jacks
RCA audio cable
AUDIO OUT
Playing Back 2 Channel Analog AudioPlaying Back Multi Channel Digital Audio
Dolby Digital decoder, DTS decoder
IN OUT
Y
PR/CR
PB/CB
L
RL
R
VIDEO
INVIDEO
OUT
S-VIDEOAUDIO IN
(L1)S-VIDEOAU DIO  OU T
HDMI OUT
COMPONENT
VIDEO OUTCOAXIALDIGITAL AUDIO OUTPUTPCM / BITSTREAM  
COAXIAL
digital audio  
coaxial input jack
digital audio coaxial cable
DIGITAL AUDIO OUTPUT this unit
Note
•  The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound 
by an MD or DAT deck.
•  By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel 
surround sound as heard in the movie theaters.
•  By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the 
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
•  Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Multi Channel Digital Audio Setting
Setting Setup >General Setting >Playback >Audio Out >
Connection Dolby Digital DTS
If output is Dolby Digital encoded audio, connect to 
a Dolby Digital decoder.Stream OFF
If output is DTS encoded audio, connect to a DTS 
decoder.PCM ON
If output is encoded audio for both Dolby Digital and 
DTS, connect to the decoder which encodes multiple 
audio sources.Stream ON
Connecting to an MD deck or DAT deck. PCM OFF
If not connected to any external devices. PCM OFF
* To complete these settings, refer to page 83.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
*MD deck or DAT deck can be also connected through coaxial jack.
E7K7AUD_D-R410KU_EN.indd   21E7K7AUD_D-R410KU_EN.indd   212007/12/14   15:02:482007/12/14   15:02:48 
						

							22 EN22 EN
INITIAL SETTING
Turn on this unit for the first time, you need to follow these steps.
1
 Press [I/yy ON/STANDBY].
Before:
Turn the TV on. Select the input to 
which the unit is connected.
2
 Use [K / L] to select your desired 
language, then press [ENTER] to set 
language.
Initial Setting
OSD LanguageEnglish
Français
Español
3
  Press [ENTER] to activate “Clock 
Setting”.
Initial Setting
Clock Setting- - -  /  - -  /  - - - -  ( - - - )
- -  :  - -  - -
4
  Proceed to step 3 in “Clock Setting” 
on page 23.
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
RETURN
SETUP
E7K7AUD_D-R410KU_EN.indd   22E7K7AUD_D-R410KU_EN.indd   222007/12/14   15:02:502007/12/14   15:02:50 
						

							23 EN23 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
SETTING THE CLOCK
Set the clock before you try the timer programming.
Clock Setting
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
2
 Use [K / L] to select “Clock”, then 
press [ENTER].
“Clock” menu will appear.
3
 Use [K / L] to select calendar or time, 
then press [ENTER]. 
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
Clock SettingJAN / 01 / 2008 ( TUE )
12 : 00 AM
4
 Use [{ / B] to select an item to set, 
and use [K / L] to select the contents 
to suit your preference, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
Clock SettingJAN / 01 / 2008 ( TUE )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press 
[ENTER].
5
  Press [SETUP] to exit.
Note
•  Your clock setting will be lost if either there is a power 
failure or this unit has been unplugged for more than 
30 seconds.
•  For setting the day, year, hour and minute, 
[the Number buttons] can also be used.
•  You can set the built-in calendar from the year 2007 
up to 2057.
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
GHI
PQRS TUV
SPACEWXYZ JKL MNO
.@/: ABC DEF
SETUP
E7K7AUD_D-R410KU_EN.indd   23E7K7AUD_D-R410KU_EN.indd   232007/12/14   15:02:512007/12/14   15:02:51 
						

							24 EN24 EN
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
 
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will 
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording 
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the 
desired mode. You can also manually format a DVD-RW once it has been used.
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu General Setting
3
 Use [K / L] to select “Format”, then 
press [ENTER].
DVD Menu
Format
Finalize
4
 Use [K / L] to select “Format Mode”, 
then press [ENTER].
DVD Menu
Format
Finalize
Start
Format Mode
5
 Use [K / L] to select “Video mode” or 
“VR mode”, then press [ENTER].
6
  Press [SETUP] to exit.
7
  Insert a brand-new disc.
Formatting will start.
Formatting 90%
8
  Formatting is completed.
“100%” is indicated.Note
•  The recording format setting is effective only for 
DVD-RW. You cannot change the recording format 
for a DVD-R and DVD+RW/+R.
•  You cannot mix two formats on one DVD-RW. If you 
insert a disc that has been recorded before, the 
recording format cannot be changed even if you 
change it in the main menu.
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
E7K7AUD_D-R410KU_EN.indd   24E7K7AUD_D-R410KU_EN.indd   242007/12/14   15:02:522007/12/14   15:02:52 
						

							25 EN25EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
FORMATTING A DISC
Reformatting a Disc Manually
  
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for 
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
Insert a recordable disc.
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu General Setting
3
 Use [K / L] to select “Format”, then 
press [ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
4
 Use [K / L] to select “Start”, then 
press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
Start
Format Mode
Selection menu will appear and prompt you to 
confirm.
•  For DVD+RW, use [K / L] to select “Yes”, then 
press [ENTER].
5
 Use [K / L] to select “Yes”, then press 
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
Start
Format ModeAre you sure?
Ye s
No
6
  Formatting is completed.
“100%” is indicated.
Formatting 100%
Note
•  When you reformat the disc, the contents of the disc 
are erased.
•  For DVD-RW, make sure that the recording format is 
set to the desired mode. (See steps 1 to 6 in 
“Choosing the Recording Format of a Brand-New 
DVD-RW” on page 24.)
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
E7K7AUD_D-R410KU_EN.indd   25E7K7AUD_D-R410KU_EN.indd   252007/12/14   15:02:542007/12/14   15:02:54 
						

							26 EN26 EN
SETTING A DISC TO PROTECT
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
3
 Use [K / L] to select “Disc Protect 
OFF 
 ON”, then press [ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
4
 Use [K / L] to select “Yes”, then press 
[ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All PlaylistProtect this disc?
Ye s
No
A disc will be protected.
This operation may take 
awhile to be completed. To prevent accidental recording, editing or erasing the 
titles, you can protect them from “DVD Menu” menu.
Note
To cancel the disc protect:
•  When you insert a disc protected with this unit, 
  “Disc Protect ON 
 OFF” will appear instead of “OFF  ON”.
DVD Menu
Format
Finalize
Disc Protect ON        OFFDelete All Playlists
  To release the protection for the disc, select “Disc 
Protect ON  OFF” at step 3, then follow rest of the 
procedures. 
  
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
E7K7AUD_D-R410KU_EN.indd   26E7K7AUD_D-R410KU_EN.indd   262007/12/14   15:02:552007/12/14   15:02:55 
						

							27 EN27EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
PLAYING THE DISCS IN OTHER DVD PLAYERS
  
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
“General Setting” menu will appear.
2
 Use [K / L] to select “Recording”, 
then press [ENTER].
“Recording” menu will appear.
3
 Use [K / L] to select “Auto Finalize”, 
then press [ENTER].
4
 Use [K / L] to select “Disc Full” or 
“End of Timer Rec”, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllAuto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)Make Recording Compatible
Auto FinalizeDisc Full
End of Timer Rec
5
 Use [K / L] to select “ON”, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllAuto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)Make Recording Compatible
Auto FinalizeDisc Full
End of Timer RecDisc FullON
OFF
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllAuto Chapter
Recording Audio Select (XP)Auto FinalizeAspect Ratio (Video mode)Make Recording Compatible
Auto FinalizeDisc Full
End of Timer RecEnd of Timer RecON
OFF
Your setting will be activated.
6
  Press [SETUP] to exit.
You can finalize discs automatically using this function. 
You can use this function to finalize discs after finishing 
all timer recordings and at the end of the disc space.
Auto Finalizing
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
E7K7AUD_D-R410KU_EN.indd   27E7K7AUD_D-R410KU_EN.indd   272007/12/14   15:02:562007/12/14   15:02:56 
						

							28 EN28 EN
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
1
 Press [SETUP].
2
 Use [K / L] to select “DVD Menu”, 
then press [ENTER].
“DVD Menu“ menu will appear.
3
 Use [K / L] to select “Finalize”, then 
press [ENTER].
4
 Use [K / L] to select “Yes”, then press 
[ENTER].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All PlaylistFinalize disc?
Ye s
No
Finalizing will start.
Finalizing 90%
This operation may take 
awhile to be completed.
5
  Finalizing is completed.
You will need to finalize discs to play back on other DVD 
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of 
the disc, a shorter recording period on the disc will 
require a longer time period for finalization. Do not 
unplug the power cord during finalization.
    
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
MENU/LIST
RETURN
SETUP
STOP
TOP MENU
E7K7AUD_D-R410KU_EN.indd   28E7K7AUD_D-R410KU_EN.indd   282007/12/14   15:02:582007/12/14   15:02:58 
						

							29 EN29EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
PLAYING THE DISCS IN OTHER DVD PLAYERS
To cancel finalizing...
(DVD-RW only)
Press [STOP C] during the finalizing is in progress. Use 
[K / L] to select “Yes”, then press [ENTER]. Finalizing is 
canceled and the unit switches to stop mode.
Finalizing 5%
Do you want to cancel ?Ye s
No
If “” appears when [STOP C] is pressed, you cannot 
cancel finalizing because the finalizing has already 
reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is pressed, 
finalizing is continued.
You cannot cancel finalizing a DVD-R, DVD+R and 
DVD+RW once it has started.
Note
•  Finalizing a disc in video mode and +VR mode 
automatically creates a title menu.
•  After you finalize the DVD+RW, you can call up the 
title list by pressing [TOP MENU], or you can call up 
the title menu by pressing [MENU/LIST].
•  Even after DVD+RW is finalized, you can still record 
or edit. After you finalize DVD-RW/-R or DVD+R, you 
cannot edit or record anything else on that disc.
•  If you insert a DVD-RW finalized with this unit, “Undo 
Finalization” will appear instead of “Finalize” at 
step 3.
•  To release the finalization of the DVD-RW disc, select 
“Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF        ON
Delete All Playlists
•  To undo the finalization of the DVD+RW, make an 
additional recording onto the disc.
•  DO NOT power off during finalizing. This may result 
in a malfunction.
•  For DVD+RW, if you have added or deleted chapters, 
or made chapters hidden, you must finalize the disc 
before being able to see those effects on other units.  
To play back discs other than DVD+RW on other DVD 
players, you will need to finalize.
E7K7AUD_D-R410KU_EN.indd   29E7K7AUD_D-R410KU_EN.indd   292007/12/14   15:02:592007/12/14   15:02:59 
						

							30 EN30 EN
INFORMATION ON DVD RECORDING
You can select a recording mode among 5 options, and 
the recording time will depend on the recording mode 
you select as follows.
Recording modeRecording time
Video/
Sound Quality
12cm 8cm
XP60 min 18 min
SP120 min 36 min
LP240 min 72 min
EP360 min 108 min
SLP480 min 144 min
•  The recording times listed above are estimates and are 
for reference purposes only. Actual recording times may 
vary.
•  The audio and video quality of content being recorded 
may differ depending on the recording mode/recording 
time chosen.
Recording Mode
You cannot record copy-protected program using this 
unit. Copy-protected video signal is included in DVD-
videos, some satellite broadcasts, some pay-per-view 
stations and some “premium” stations.
If copy-protected material is detected, recording will 
pause or stop automatically and an error message 
appears on the screen.
“Copy-once only” video can only be recorded to CPRM 
compatible DVD-RW formatted in VR mode.
What is “CPRM”?
CPRM is a copy protection system with scramble system 
regarding the recording of “copy-once” broadcast 
programs. CPRM stands for Content Protection for 
Recordable Media.
This unit is CPRM compatible, which means that you can 
record copy-once broadcast programs, but you cannot 
make another copy of those recordings. CPRM recordings 
can only be made on CPRM compatible DVD-RW 
formatted in VR mode, and CPRM recordings can only be 
played back on DVD players that are specifically 
compatible with CPRM.
Making discs playable in other DVD players (Finalize)
For DVD-RW/-R, it is necessary to finalize the disc after 
recording, in order to play back the disc on other DVD 
players. (Refer to pages 27-29.) For DVD+RW/+R, it is 
recommended to finalize the disc in order to make the 
disc more compatible to other DVD player. When video 
and +VR mode disc are finalized, a title menu is created. 
You cannot finalize discs in other DVD recorders.
Restrictions on Recording
Note
•  This unit cannot record to CD-RW or CD-R.
•  DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on 
a personal computer or a DVD or CD recorder may 
not be played back if the disc is damaged or dirty or 
if there is condensation on the player’s lens.
•  If you record a disc using a personal computer, even 
if it is recorded in a compatible format it may not be 
played back because of the settings of the 
application software used to create the disc. (Check 
with the software publisher for more detailed 
information.)
•  Discs recorded in video mode on this unit cannot 
record additional information using other DVD 
recorders.
•  It is not possible to use a DVD-RW/DVD+RW 
formatted with this unit on other DVD recorder 
unless the content of the disc was also recorded with 
this unit.
•  Since the recording is made by the VBR (variable bit 
rate) method, depending on the picture you are 
recording, the actual remaining time for recording 
may be a little shorter than the remaining time 
displayed on the TV screen.
E7K7AUD_D-R410KU_EN.indd   30E7K7AUD_D-R410KU_EN.indd   302007/12/14   15:03:002007/12/14   15:03:00