Toshiba Dr410 User Manual

							81 EN81 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
GENERAL SETTING
Press [STOP C] if you are playing back a disc.
1
  Press [SETUP] and use [K / L] to 
select “General Setting“, then press 
[ENTER].
2
 Use [K / L] to select “Playback”, then 
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
3
 Use [K / L] to select a desired item, 
then press [ENTER].
1234567
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Submenu will appear.
4
 Refer 1 to 7 on pages 82 to 84 and 
set the selected item.
5
  When you finish with the setting, 
press [SETUP] to exit.
Playback
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
CLEAR
ENTER
GHI
PQRS TUV
SPACEWXYZ JKL MNO
.@/: ABC DEF
OPEN/
CLOSE
SETUP
STOP
E7K7AUD_D-R410KU_EN.indd   81E7K7AUD_D-R410KU_EN.indd   812007/12/14   15:04:022007/12/14   15:04:02 
						

							82 EN82 EN
GENERAL SETTING
1Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback 
will stop if the ratings exceed the levels you set, it will 
require you to enter a password before the disc will 
playback. This feature prevents your children from 
viewing inappropriate material.
Use [K / L] to select the desired level, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to A.
If a password has been set already, proceed to 
B.
RATING EXPLANATIONS
•  OFF : Parental Control is inactive; all discs can play.
•  8 [ADULT]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC-17]: No one under 17 admitted.
•  6 [R]: Restricted; under 17 requires accompanying 
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
• 1 [Kid Safe]: Suitable for children.
Note
•  Parental lock function may not be available to some 
discs.
•  With some DVD, it may be difficult to find if they are 
compatible with parental lock. Be sure to check if the 
parental lock function operates in the way that you 
have set.
•  Record the password in case you forget it.
•  If there is a DVD in the unit when you set up the 
parental lock, press [OPEN/CLOSE A] to activate the 
parental lock level.
A A password has not been set yet.
Use [K / L] to select “Yes”, then press [ENTER]. Use 
[the Number buttons] to enter a new password except 
for 4737, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
Change Password?
Ye s
No
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
Password Input
Yes
Your setting will be activated.
B A password has been set already.
•  Use [the Number buttons] to enter the current 
password.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
Password Input
Your setting will be activated.
•  If you want to change password, use [K / L] to select 
“Yes” then press [ENTER]. Use [the Number buttons] 
to enter a new password, then press [ENTER].

General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
Password Input
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeParental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
Change Password?
Ye s
No
Yes
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
•  When you forget the password or you want to clear 
all settings in “Parental Lock” menu, enter 4,7,3,7 
using [the Number buttons] in password input 
window. Password will be cleared and parental levels 
will be set to “OFF”.
Playback (cont’d)
E7K7AUD_D-R410KU_EN.indd   82E7K7AUD_D-R410KU_EN.indd   822007/12/14   15:04:032007/12/14   15:04:03 
						

							83 EN83 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
GENERAL SETTING
2Audio Out
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Use [K / L] to select a desired item, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeAudio Out
Dynamic Range Control
PCM
Dolby Digital
DTSA
B
C
D
ADynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTSDynamic Range ControlON
OFF
Your setting will be activated.
Note
•  Dynamic range control function is available only on 
the discs which are recorded in the Dolby Digital 
format.
BSettings for PCM (Default : 48kHz)
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTSPCM48kHz
96kHz
Your setting will be activated.
48kHz   :  If your amplifier/decoder is NOT compatible 
with 96kHz PCM, select “48kHz”. 96kHz sound 
will be output in 48kHz.
96kHz   :  If your amplifier/decoder is compatible with 
96kHz PCM, select “96kHz”. 96kHz sound will 
be output.
Note
When playing back disc with copyright protection
•  Even if you select “96kHz”, the sound will be down 
sampled at 48kHz.
CSettings for Dolby Digital (Default : Stream)
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTSDolby DigitalPCM
Stream
Your setting will be activated.
PCM   :  Converts the Dolby Digital into PCM (2 channel). 
When your amplifier/decoder is NOT 
compatible with Dolby Digital, set to “PCM”.
Stream   :  Outputs Dolby Digital signals. 
When your amplifier/decoder is compatible 
with Dolby Digital, set to “Stream”.
DSettings for DTS (Default : OFF)
Select a setting using [K / L], then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTSDTSON
OFF
Your setting is activated.
ON :  Outputs DTS signals. 
If your amplifier / decoder is compatible with 
DTS, set to “ON”.
OFF :  No DTS signal is output. 
If your amplifier / decoder is NOT compatible 
with DTS, set to “OFF”.
Playback (cont’d)
E7K7AUD_D-R410KU_EN.indd   83E7K7AUD_D-R410KU_EN.indd   832007/12/14   15:04:042007/12/14   15:04:04 
						

							84 EN84 EN
GENERAL SETTING
3Disc Menu Language (Default : English)
Set the language for disc menu.
Use [K / L] to select a language, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still ModeDisc Menu LanguageEnglish
French
Spanish
Other
Your setting will be activated.
4Audio Language (Default : Original)
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Audio LanguageOriginal
English
French
Spanish
Other
Your setting will be activated.
•  When “Original” is selected, the audio language will be 
in the disc’s default language.
5Subtitle Language (Default : OFF)
Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Subtitle LanguageOFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for 
3 to 5, press 4-digit code 
using [the Number buttons].
Code Input- ---
•  When you finish entering the code, press [ENTER]. 
Refer to the language code table on page 96.
Note
•  Only the languages supported by the disc can be 
selected.
•  Audio language setting may not be available to 
some discs.
•  You can also change or switch off the subtitles on a 
DVD from the disc menu if it is available.
• Press [CLEAR] to erase numbers entered incorrectly.
6Angle Icon (Default : ON)
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Angle IconON
OFF
Your setting will be activated.
7Still Mode (Default : Auto)
Select “Auto” usually.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllParental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Still ModeAuto
Field
Frame
Your setting will be activated.
Auto :  Optimum resolution setting (“Field” or 
“Frame”) will be selected.
Field :  Images in the still mode will be stabilized.
Frame :  Images in the still mode will be highly defined.
Note
• Frame is one completed video image made up of two 
fields (There are 30 frames per second of NTSC video).
Playback (cont’d)
E7K7AUD_D-R410KU_EN.indd   84E7K7AUD_D-R410KU_EN.indd   842007/12/14   15:04:052007/12/14   15:04:05 
						

							85 EN85 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
1OSD Language (Default : English)
Set the language for the on-screen display.
Use [K / L] to select a language, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllOSD Language
Screen Saver
FL Dimmer
V-Chip
OSD Language
English
Français
Español
Your setting will be activated.
2Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the 
TV screen.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllOSD Language
Screen Saver
FL Dimmer
V-Chip
Screen SaverOFF
5 minutes
10  minutes
15  minutes
30  minutes
Your setting will be activated.
3FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllOSD Language
Screen Saver
FL Dimmer
V-Chip
FL Dimmer
Auto
Bright
Dark
You can choose one from “Auto”, “Bright” or “Dark”.
If “Auto” is selected, the display gets dark when the 
power is off.
Press [STOP C] if you are playing back a disc.
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
2
 Use [K / L] to select “Display”, then 
press [ENTER].
3
 Use [K / L] to select a desired item, 
then press [ENTER].
OSD Language
Screen Saver
FL Dimmer
V-Chip1234
Submenu will appear.
Display
GENERAL SETTING
SE-R0265
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
CLEAR
ENTER
SETUP
STOP
GHI
PQRS TUV
SPACEWXYZ JKL MNO
.@/: ABC DEF
E7K7AUD_D-R410KU_EN.indd   85E7K7AUD_D-R410KU_EN.indd   852007/12/14   15:04:052007/12/14   15:04:05 
						

							86 EN86 EN
4V-Chip
With the v-chip system in this unit, you can set the 
viewing limitation for the analog/digital TV programs 
received from the external tuner or recorded on DVDs to 
prevent your children from watching inappropriate 
programs. If the unit detects a blocked program, a 
restriction message appears and you are not allowed to 
view the program.
1)  Use [the Number buttons] to enter the access 
password.
If you have not set the password, first, use [the 
Number buttons] to set the access password, then 
press [ENTER]. The number you entered will be stored 
as the access password.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Password Input
2)  Use [K / L] to select a desired item, then press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
V-ChipMPAA Rating
TV Rating
Canadian French Rating
Canadian English Rating
Change PasswordA
B
C
D
E
AMPAA Rating
BTV Rating
CCanadian French Rating
DCanadian English Rating
You can set the viewing limitation according to MPAA 
rating (US movie ratings), TV Rating (US TV program 
ratings), Canadian French Rating, Canadian English Rating.
1)  Use [K / L] to select the desired rating, then press 
[ENTER] repeatedly to switch between view and 
block. When it is blocked a key icon will appear.
e.g.) MPAA rating
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
V-ChipMPAA Rating
TV Rating
Canadian French Rating
Canadian English Rating
Change Password
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR
[MPAA Rating]
Rating Category
XMature audience onlyhigher
NC-17No one under 17 admitted
RRestricted; under 17 requires 
accompanying parent or adult guardian
PG-13Unsuitable for children under 13
PGParental guidance suggested
GGeneral audience
NRNo ratinglower
[TV Rating]
Rating Category
TV-MAMature audience onlyhigher
TV-14Unsuitable for children under 14
TV-PGParental guidance suggested
TV-GGeneral audience
TV-Y7Appropriate for all children 7 and older
TV-YAppropriate for all childrenlower
[Canadian French Rating]
Rating Category
18 ans+Adult audience onlyhigher
16 ans+Unsuitable for ages under 16
13 ans+Unsuitable for ages under 13
8 ans+Unsuitable for ages under 8
GGeneral audience
EExempt programlower
GENERAL SETTING
Display (cont’d)
E7K7AUD_D-R410KU_EN.indd   86E7K7AUD_D-R410KU_EN.indd   862007/12/14   15:04:072007/12/14   15:04:07 
						

							87 EN87 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
GENERAL SETTING
[Canadian English Rating]
Rating Category
18+Adult audience onlyhigher
14+Unsuitable for ages under 14
PGParental guidance suggested
GGeneral audience
C8+For children over 8
CFor all children
EExempt programlower
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you 
can further set the sub ratings to block specific 
elements of programming. Press [K / L/ { / B] to select 
the desired rating or sub rating, then press [ENTER] 
repeatedly to switch between view and block. Sub 
rating status will appear on the side of the main rating.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
V-ChipMPAA Rating
TV Rating
CAN French Rating
CAN English Rating
Change Password
TV Rating
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y  FV  V  S  L  D
Sub Rating Category Rating
FVFantasy Violence TV-Y7
VViolence
TV-PG
TV-14
TV-MA SSexual Situation
LCoarse Language
DSuggestive Dialogue TV-PG, TV-14
Note
•  Changing the main rating to block or view 
automatically changes all its sub ratings to the same 
(block or view).
Display (cont’d)
 EChange Password
Change the current password.
Use [the Number Buttons] to enter new access 
password.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
•  When you forgot the access password, enter 4,7,3,7 
using [the Number buttons] in password input 
window. Password will be cleared.
4
  Press [SETUP] to exit.
E7K7AUD_D-R410KU_EN.indd   87E7K7AUD_D-R410KU_EN.indd   872007/12/14   15:04:072007/12/14   15:04:07 
						

							88 EN88 EN
GENERAL SETTING
1Progressive (Default : OFF)
This unit is compatible with the progressive scan system. 
The feature provides you with the higher definition 
images than the traditional output system does. To utilize 
this feature, you must set progressive scan mode to “ON”.
1)  Use [K / L] to select “ON“, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllProgressive
TV Aspect
Select Video
ProgressiveON
OFF
2)  Use [{ / B] to select “Yes“, then press [ENTER].
General Setting
Playback
Display
Video
Rcording
Clock
HDMI
Reset AllProgressive
TV Aspect
Select Video
ProgressiveON
OFF
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE : 
  If there is no picture or picture is
  distorted after selecting “Yes”,
  Wait about 15 seconds for auto recovery.
Activate?                                 Yes  No
3)  Use [K / L] to select “Yes“ within 15 seconds, then 
press [ENTER].
Your setting will be activated.
Note
•  If your TV is compatible with progressive scan (480p), you 
are recommended to use the HDMI or component video 
cable (commercially available) to connect this unit to the 
TV. (Refer to “Method 3” on page 18 or page 19.) If not, use 
the RCA video cable and set the progressive scan to “OFF”.
•  If the Progressive Scan image is distorted, you can 
cancel Progressive Scan by pressing and holding 
[SETUP] for more than 3 seconds during DVD 
playback. The “Progressive” setting will be “OFF”.
•  When selecting “No” or not pressing any buttons on 
the unit or remote control within 15 seconds at step 3, 
progressive scan remains to be “OFF” (interlace scan). 
2TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of 
what you are playing back with the unit and your TV 
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset AllProgressive
TV Aspect
Select Video
TV Aspect4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the 
top and bottom of the TV screen when playing back a 
wide-screen picture. Select “4:3 Pan & Scan” for a full 
height picture with both sides trimmed when playing 
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Press [STOP C] if you are playing back a disc.
1
  Press [SETUP] and use [K / L] to 
select “General Setting”, then press 
[ENTER].
2
 Use [K / L] to select “Video”, then 
press [ENTER].
3
 Use [K / L] to select a desired item, 
then press [ENTER].
Progressive
TV Aspect
Select Video123
Submenu will appear.
4
 Refer 1 to 2 on this page and set 
the selected item.
• For 3, refer to “SETTINGS FOR THE VIDEO 
INPUT“ on page 31.
5
  When you finish with the setting, 
press [SETUP] to exit.
Video
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURNMENU/LIST WXYZ JKL MNODEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMREC REPEATPA U S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP FWD SKIPTIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
STOP
E7K7AUD_D-R410KU_EN.indd   88E7K7AUD_D-R410KU_EN.indd   882007/12/14   15:04:072007/12/14   15:04:07 
						

							89EN89EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
1
  Press [SETUP] in stop mode and use 
[K / L] to select “General Setting”, 
then press [ENTER].
2
 Use [K / L] to select “HDMI”, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
3
 Use [K / L] to select a desired item,  then press [ENTER].
Format
HDMI Audio
RGB Range
HDMI Control1234
• You cannot select 1 through 3 when an 
HDMI is not connected and the items are 
shown in grey color.
4
  When you finish with the setting,  press [SETUP] to exit.
1Format (Default : RGB)
You can select the color space for HDMI output. 
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [ENTER].
•  When the connected device is not compatible with the  Y/Cb/Cr, HDMI signal is output as RGB regardless of the 
setting.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All Format
HDMI Audio
RGB Range
HDMI CEC
Format
RGB
YCbCr
Your setting will be activated.
HDMI
GENERAL SETTING
SE-R0265
OPEN/
CLOSE INPUT
SELECT HDMI
.@/: ABC GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURN
MENU/LIST
WXYZ
JKL MNO DEF
ENTER
SKIP REV
PLAY
REC MODE ZOOM REC
REPEAT PAU S E
TIME SLIP
1.3x / 0.8x PLAYINSTANT SKIP
STOP
FWD SKIP TIMER
PROG.
SATELLITE LINK
ENTER
INPUT
SELECT
MENU/LIST
SETUP
TIMER
PROG.
TOP MENU
E7K7AUD_D-R410KU_EN.indd   89 E7K7AUD_D-R410KU_EN.indd   89 2007/12/18   11:51:03
2007/12/18   11:51:03 
						

							90 EN90 EN
2HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI 
(when you digitally output the audio through the 
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio 
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [ENTER].
•  Set to “OFF” when the HDMI sound is not output.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All Format
HDMI Audio
RGB Range
HDMI CEC
HDMI AudioON
OFF
Your setting will be activated.
3RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of 
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
•  Select “Enhanced“ if the black-white contrast is not clear.
•  This setting is effective only for HDMI RGB output.
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All Format
HDMI Audio
RGB Range
HDMI CEC
RGB RangeNormal
Enhanced
Your setting will be activated.
4HDMI Control (Default : OFF)
You can control all HDMI Control compatible components 
connected via HDMI cable by simple button operations of 
remote control of this unit.
In order to enable the function you need to set “HDMI 
Control” to “ON”.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All Format
HDMI Audio
RGB Range
HDMI CEC
HDMI ControlON
OFF
Your setting will be activated. Functions available for the HDMI Control
•  One touch play
When the operations with following buttons of this 
unit’s remote control are performed, the TV will 
automatically turned on and switch to appropriate 
input channel.
Buttons for one touch play: [PLAY  B],  [TOP MENU], 
[MENU/LIST],  [TIMER PROG.],  [SETUP], 
[the Number buttons],  [INPUT SELECT 
]
• System information
Get & Set Menu Language: This unit recognizes the 
OSD language set for the TV and automatically set the 
same language as the player menu language (OSD 
menu language) for this unit.
Power off: When you turn the TV off, this unit and all 
equipment connected via HDMI will automatically turns 
off except during recording on the unit.
Receiving operational signal from TV’s remote 
control: You can operate this unit with TV’s remote 
control. Check your TV owner’s manual for details.
Note
•  This function may not work properly depending on the TV you are connecting.
•  The available operation may differ depends on the  TV’s remote control you use.
•  For the one touch play, [MENU/LIST] may not work  depending on the disc in this unit.
•  Other components must be compatible with HDMI  Control in order to use this function. 
GENERAL SETTING
HDMI (cont’d)
E7K7AUD_D-R410KU_EN.indd   90 E7K7AUD_D-R410KU_EN.indd   90 2007/12/18   11:51:04
2007/12/18   11:51:04