Toshiba Strata Ctx100, Ctx670 General Description Manual
Have a look at the manual Toshiba Strata Ctx100, Ctx670 General Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Strata CTX670 Overview CTX670 License Control Strata CTX General Description 06/037 Network Interface The processor has an on-board Ethernet 10Base-T Ethernet circuit for connection to Open Architecture Computer Telephony Interface (CTI) applications. This provides extensive call control and telephone support for CTI applications. The Ethernet Network Interface Card (NIC) port also enables connection to the following: CTX Attendant Console ACD server Local and Remote CTX WinAdmin PC Soft Key Control of Voice Mail features Maintenance Modem A built-in maintenance modem (33.6Kbps/V.34) on the processor can provide point-to-point local or remote connection to the CTX WinAdmin administration software. CTX670 Processor PCB Subassemblies Subassemblies can be added to the processor PCBs to enable system expansion and provide additional features. The subassemblies are: BEXS and BBMS expansion PCBs mount onto the processor PCBs to provide increased port capacity, from Basic (192 ports) to Expanded (672 ports). The BEXS provides switching capacity, and the BBMS provides memory capacity. For Basic and Expanded capacities of stations, lines and features, see Ta b l e s 3~7. To expand the system, both subassemblies must be installed. BSIS interface PCB which attaches to the BECU to provide up to four RS-232 interface ports for SMDR Call Accounting and SMDI or Toshiba Proprietary Voice Mail interface. See Table 3 on page 11 for the number of cabinets and universal PCB slots for the Basic and Expanded systems. CTX670 License Control The system size and feature capability is controlled using a software License Key Code. This key code is obtained from the Toshiba Internet FYI site during the ordering process and is installed onto the system processor via Strata CTX WinAdmin. Processor license codes activate system hardware capacities in the following increments. The first 64 line/station ports do not require a license. Each additional set of four line/station ports requires one LIC670-4 PORTS license (maximum of 672 ports). The on-board DTMF receiver circuit provides up to 32 DTMF receiver hardware circuits. The first four DTMF circuits do not require a license. Each additional set of four DTMF receiver circuits requires one LIC670-4 DTMF license (max. total of 32 DTMF circuits). NoteDTMF tone receiver circuits are required for standard telephones, Voice Mail DTMF integration, Tie, DID and DNIS line service. The optional RS-232 serial port interface (BSIS) provides two circuits to interface with Voice Mail, SMDI or Toshiba Proprietary Voice Mail integration, Call Accounting SMDR, and two for future applications. The first circuit does not require a license, but circuits two through four each require one LIC670-SER PORT license.
Strata CTX670 Overview CTX670 Cabinet Slots 8Strata CTX General Description 06/03 Licensed Software Options Some software options are activated with license codes. The following software options require a license: Each CTX system (node) in a Strata Net QSIG Network (ISDN or IP) requires one LIC670- QSIG NET license. A maximum of four serial network nodes are allowed in any one serial chain in the network topology. Each individual CTI Open Architecture application requires one LIC670-CSTA AP license (maximum nine). CTX670 Cabinet Slots Base Cabinet The Base Cabinet has two dedicated slots used for the system processor PCBs and eight universal slots, labeled “S101~S108,” that can accommodate station, CO line or option PCBs (see Figure 4). It also houses a power supply. Figure 4 Base Cabinet Interior POW +5V -5V P. F. RESET EXP BASEAC INBATT DC OUT -24V1 -24V2 -24V3 -24V4 +- POWER ON OFF FG5002B101 B102 S101 S102 S103 S104 S105 S106 S107 S108 5466 B101 B102 S101 S102 S103 S104 S105 S106 S107S108
Strata CTX670 Overview CTX670 Remote Expansion Cabinet Strata CTX General Description 06/039 Expansion Cabinets One to six Expansion Cabinets can be added to increase the system station and CO line capacity. Each expansion cabinet provides 10 slots (S_01~S_10). Figure 5 shows an Expansion Cabinet. Refer to the following section for cabinet slot and station/line capacities. Ta b l e s 4 and 5 show the number of stations and CO lines allowed when additional cabinets and PCBs are used. CTX670 Remote Expansion Cabinet A CTX670 Expansion Cabinet can be located up to three kilometers (1.86 miles) from its Base Cabinet. Remote Expansion Cabinets are enabled by the RRCU PCB. One RRCU connects to up to two ribbon-type Data Cables and applies the inter-cabinet signal to a multi-mode fiber-optic pair. One fiber pair can support one or two Expansion Cabinets in one remote location using one RRCU in the Base Cabinet and another in the Remote Expansion Cabinet. The CTX670 Base Cabinet supports up to six Remote Expansion Cabinets (at least one RRCU PCB is required for each remote location). Remote Cabinets support the BIOU for external Page Zones, Night Bell, etc., and all CO line and trunk interface PCBs. Network clock synchronization can only be derived from digital trunks installed in the Base Cabinet (Master) location. A Remote Cabinet can support all PCBs that can be installed in a local Expansion Cabinet, including digital trunk cards. However, the system cannot derive network clock synchronization from a digital trunk installed in a Remote Cabinet. This requires a digital trunk installed in the Base Cabinet or in a local Expansion Cabinet connected to the Base by a standard ribbon cable. For each Remote Cabinet location, local trunks may be required for correct 911 service. S_01 S_02 S_03 S_04 S_05 S_06 S_07 S_08 S_09 S_10 5003 CABINET NO. 2 S_01 S_02 S_03 S_04 S_05 S_06 S_07 S_08 S_09 S_1034567 POW +5V -5V P. F. RESET EXP BASEAC INAC IN DC OUT -27V1 -27V2 -27V3 -27V4 +- POWER ON OFF FG5002 POW +5V -5V P. F. RESET EXP BASEAC INBATT DC OUT -27V1 -27V2 -27V3 -27V4 +- POWER ON OFF FG5002 Figure 5 Expansion Cabinet Interior
Strata CTX670 Overview CTX670 Remote Expansion Cabinet 10Strata CTX General Description 06/03
Strata CTX General Description 06/0311 Capacities3 This chapter contains Strata CTX100 and CTX670 capacities for stations and peripherals, CO lines, station buttons and system features. All tables apply to both systems unless otherwise noted. System Capacities Important!The maximum capacities listed for the CTX100 in Ta b l e s 3~7 are based on an expanded CTX100 (Base + Expansion Cabinet). Table 3 Cabinet and Slot Capacities Cabinets/Slots/PortsCTX100CTX670 Basic Processor BBCU + BECU CTX670 Expanded Processor BBCU + BECU + BEXS + BBMS Cabinets1 or 2 1 to 2 1 to 7 Universal slots4 or 8 8 or 18 8 to 68 Maximum capacity of ports (lines + stations)112 192 672 Table 4 Station/Peripherals System Capacities StationsCTX100 Base & ExpansionCTX670 Basic Processor BBCU + BECUCTX670 Expanded Processor BBCU + BECU + BEXS + BBMS Add-on modules (DADM3120, DADM3020) per Base Cabinet130 DKTs with 1 ADM 23 DKTs with 2 ADMs55 DKTs with 1 ADM 43 DKTs with 2 ADMs55 DKTs with 1 ADM 43 DKTs with 2 ADMs Add-on modules (DADM3020) per Expansion Cabinet131 DKTs with 1 ADM 24 DKTs with 2 ADMs57 DKTs with 1 ADM 45 DKTs with 2 ADMs57 DKTs with 1 ADM 45 DKTs with 2 ADMs CTX Attendant consoles224 DKT3000- and 2000-series DKTs172/system (40 Base Cabinet) (40/Expan. Cab.)152/system (72 Base Cabinet) (80/Expan. Cab.)552/system (72 Base Cabinet) (80/Expan. Cab.) IPT telephones64 per cabinet 72 per system128 Base 96 Expansion 160 System128 Base 96 Expansion 560 System IPT telephones with DADM3120226 per cabinet 26 per system58 per cabinet 58 per system 200 per cabinet 200 per system
Capacities System Capacities 12Strata CTX General Description 06/03 DKT2204-CT or DKT2304-CT Cordless Telephone172 152 552 Door locks4510 Door phone control boxes (DDCB)238 Door phones6924 DSS consoles (DDSS)3516 ISDN BRI station circuits TE-1 and TA (2B+D per circuit)12 28 96 Off-premise stations64 144 544 BPCI used for TAPI only: per cabinet135 66 66 Total Stations (Digital/Analog/ISDN BRI B channel combined)72 160 560 Standard stations64 144 544 Calls existing at the same time56 96 366 1. Limit is based on cabinet Power Factor (PF). 2. Based on the maximum allowed flexible buttons. Table 5 Line Capacities and Universal PCB Slots LinesCTX100Base & Expansion CTX670 Basic Processor BBCU + BECU CTX670 Expanded Processor BBCU + BECU + BEXS + BBMS CO lines – loop start (analog - 8 lines/slot)64 96 264 CO lines – ground start (analog - 4 lines/slot)32 72 264 DID lines (analog - 4 lines/slot)32 72 264 Tie lines (analog - 4 lines/slot)32 72 264 VoIP lines (4 lines/slot)1 1. Capacity is limited by FCC, Part 15, ElectroMagnetic Compatibility (EMC) restrictions. 82020 T1 lines (DS-1)2 2. T1 lines can be loop start, ground start, Tie or DID (maximum 24 lines per unit, any type or combination). 64 96 264 ISDN BRI B channel lines3 3. BRI lines provide CO line services, including Caller ID, DID and Direct Inward Lines (DIL). 64 96 256 ISDN PRI B channel lines4 4. PRI lines provide CO line services, including QSIG Networking, Calling Party Number/Name, DID, Tie, POTS, FX and DIT. 48 96 264 IP QSIG Channels5 5. QSIG over IP channels provides Strata Net functionality. 48 96 264 Total lines (Analog, T1, ISDN BRI and PRI B channels combined)64 96 264 Channel Groups32 48 128 Number of groups w/ GCO Line buttons32 50 128 Table 4 Station/Peripherals System Capacities (continued) StationsCTX100 Base & ExpansionCTX670 Basic Processor BBCU + BECUCTX670 Expanded Processor BBCU + BECU + BEXS + BBMS
Capacities System Capacities Strata CTX General Description 06/0313 Table 6 Station Buttons Station Buttons per SystemCTX100 Base & ExpansionCTX670 Basic Processor BBCU + BECUCTX670 Expanded Processor BBCU + BECU + BEXS + BBMS Call Forward, Personal CF Buttons72 160 560 CO Line Buttons64 96 264 Group CO Line Buttons64 96 264 Pooled CO Line Buttons32 50 128 CO Group and Pooled Line Buttons64 96 264 Station Loop Buttons81550 Door Unlock Buttons4816 Flexible Telephone Buttons1600 3500 12000 Line Buttons in use at the same time1440 3200 3200 Message Waiting Registration (DNs with MW)130 230 800 Multiple Appearances of DNs on Telephones2000 4000 12000 Night Transfer Buttons24 8 One Touch Buttons800 1750 6000 Primary Directory Numbers [PDNs] per system72 160 560 Phantom Directory Numbers [PhDNs] per system288 640 2240 [PhDNs] with Message Waiting Indication LED18 38 128 ISDN DNs96 (8 DNs/station)224 (8 DNs/station)768 (8 DNs/station)
Capacities System Capacities 14Strata CTX General Description 06/03 Table 7 System Feature Capacities FeaturesCTX100 Base & ExpansionCTX670 Basic Processor BBCU + BECU CTX670 Expanded Processor BBCU + BECU + BEXS + BBMS Pilot DNs100200256 Advisory LCD Messages (Set on a Telephone)111 Advisory LCD Messages Lists (per System)101010 Attendant Groups111 Call Accounting SMDR Interface1111 Call Forward, System CF Patterns41032 Call Park Orbits (General)143264 Call Park Orbits (Individual)5696336 Caller ID/ANI/CNIS Numbers stored (Call History records)Up to 100/stationUp to 100/stationUp to 100/station Up to 660/systemUp to 1000/systemUp to 2000/system CO Line Groups - Incoming Line Groups (ILG)3250128 CO Line Groups - Outgoing Line Groups (OLG)3250128 Outgoing Line Groups (OLG) Members per system (Trunks + ISDN Line Service Index)96144392 Conference Circuits646496 Conferencing (three-parties simultaneously)2202121 Conferencing (eight-parties simultaneously)28812 Conference Party types (up to 8 total lines + stations)6 lines max. 8 stations max.6 lines max.8 stations max.6 lines max.8 stations max. Two-CO Line Conferencing – simultaneously2 (Two party only, no telephone or VM port)3248132 Conference/Line Volume Adjustment (PAD) Groups61032 DID Numbers for Calling Number ID/system2255001000 DNIS/DID Network Routing Numbers2004001000 DNIS/DID Numbers45010002000 DTMF Receivers3161632 E911 Groups888 Emergency Call Groups888 Hunt Groups (Serial/Circular/Distributed combined)90200640 Hunt Group Size (DNs per group)72160560 Hunt Group Stations (per system)3608002800 ISDN DNs96224768 ISDN Line Service Indexes3248128 Multiple Call Ring Group163264 Night Bell Control Relay4111 Night Transfer Control Relay4111 Off-hook Call Announce Handsets (simultaneous)202131 Off-hook Call Announce to Telephone Speakers 57211 2352 Page Mute External BGM Control Relay4111
Capacities System Capacities Strata CTX General Description 06/0315 Page Zone Relays4888 Page Groups (Phones with or without External Zones)4816 Paging – (Group Page – simultaneous stations paged)72120120 Pickup Groups51032 Ring Tones (External Call Ring Tones for DKTs)444 Ring Tones (Internal Call Ring Tones for DKTs)111 Speed Dial - Station SD numbers per system6108024005600 Speed Dial - System SD numbers per system800800800 Stratagy DK Voice Mail Systems per system111 Tenants111 Destination Restriction Level (DRL) Classes161616 Verified Account Codes1353001000 Voice Mail SMDI Interface1111 1. SMDI and SMDR require BSIS serial port interface. 2. Conference circuits are used dynamically, so the maximum number of simultaneous conferences is affected by the number of conference members in each conference. The total number of members in simultaneous conferences cannot exceed the total number of conference circuits. Each conference can have up to eight members. 3. DTMF receivers are required for standard touch tone telephones, voice mail integration, Tie, DID and DISA lines. 4. An option BIOU is required for up to four zone page relays and four control relays on the CTX100 and CTX670. One control relay is provided on board the CTX100 processor. 5. Speaker OCA capacity is determined by 2B channel slot availability and power supply. Requires BVSU option in telephone. Speaker OCA is not available on IPT1020-SD telephones. 6. Up to 100 Station SD numbers, allocated in increments of 10, can be programmed per station. Table 7 System Feature Capacities (continued) FeaturesCTX100 Base & ExpansionCTX670 Basic Processor BBCU + BECUCTX670 Expanded Processor BBCU + BECU + BEXS + BBMS
Capacities CTX100 Maximum Capacity Configuration Examples 16Strata CTX General Description 06/03 CTX100 Maximum Capacity Configuration Examples Table 8 CTX100 Base Cabinet with Digital Telephones and Loop Start Line With or Without Caller ID Ta b l e 9CTX100 Base and Expansion Cabinet with Analog Loop Start Lines Table 10 CTX100 Base Only: Digital Telephones and T1 and/or PRI lines 4 Universal Slots 40 Stations (Max.) 24 CO lines (Max.) 44 Stations + Analog loop start lines combined (Max.) StationsAnalog loop start lines 404 (none can have Caller ID) 328 (all can have Caller ID) 3216 (none can have Caller ID) 1616 (8 can have Caller ID) 241 1. Using ADKU. 8 (none can have Caller ID) 8 Universal Slots 72 Stations (Max.) 56 CO lines (Max.) 92 Stations + Analog Loop Start Lines combined (Max.) StationsAnalog loop start lines 7220 (none can have Caller ID) 7216 (8 can have Caller ID) 6432 (none can have Caller ID) 6424 (8 can have Caller ID) 6416 (all can have Caller ID) 4840 (none can have Caller ID) 4832 (8 can have Caller ID) 4824 (16 can have Caller ID) 3248 (none can have Caller ID) 3240 (8 can have Caller ID) 3232(16 can have Caller ID) 3224 (24 can have Caller ID) 1632 (24 can have Caller ID) 4 Universal Slots 40 Stations (Max.) 48 lines (Max.) 64 Stations + T1 and/or PRI lines combined (Max.) StationsT1 and/or PRI lines 4024/23 3240/40 1648/46