Toshiba Strata Ctx100, Ctx670 General Description Manual
Have a look at the manual Toshiba Strata Ctx100, Ctx670 General Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Strata CTX General Description 06/0327 Telephones and Peripherals5 This chapter covers the Toshiba 3000-series digital telephones, Internet Protocol Telephones (IPTs), and peripherals that are compatible with Strata CTX BDKU telephone interface circuit card. The IPT1020-SD and the 3000-series telephones have a number of enhanced features, including: Fixed Speed Dial () button Four Soft Keys, located below the LCD to respond to the Strata CTX feature prompts Wide 24-character x two-line 10- and 20-button LCD on the two-line LCD models 24-character x eight-line large LCD model, which offers an adjustable tilt-screen for easy viewing. Comes with 16 Soft Keys located on the sides of the large LCD to respond to the Strata CTX feature prompts Additional feature adjustments, such as setting button beeps, room noise sensitivity and handset busy override tone Optional tilt stand to adjust the angle of the telephone on the desktop The Strata CTX also supports the DKT2000- and DKT1000-series telephones; however, these earlier models do not support all of the features that are available to the 3000-series telephones. The Strata CTX does not support electronic telephones. For more information on station and peripheral specifications, refer to the Appendix.
Telephones and Peripherals DKT3000-series and IP Telephones 28Strata CTX General Description 06/03 DKT3000-series and IP Telephones The Strata CTX supports the Toshiba 3000-series digital telephones and IPT1020-SD IP telephones, which offer station users a number of useful features that are easy to access (see Figure 10 and photos on the next page). Figure 10 3000-Series Digital Telephone and IPT1020-SD Buttons and Features 6753 Msg Mic Spkr Spdial Redial Cnf/Trn Vo l HoldCalls the station or voice mail device that left the message. Message LED flashes when the station has a message in Voice Mail or from another station. Also functions as a toggle switch to talk back to a handset OCA caller. Turns off the microphone during speakerphone operation for private office conversations. Also used to talk back to a handset OCA caller. Turns speaker on and mutes handset microphone for group listening. Also disconnects on-hook dialing calls and is used to toggle the telephone between handset and speakerphone operation. Used to Dial Speed Dial numbers. Redials last number dialed from the station. Set up Conferences or Transfers calls. Controls handset, speaker, and ring volumes. Places internal [DN] and outside calls on hold or Exclusive Hold. PageScrollMode Feature Msg MicRedial Spdial SpkrCnf/TrnHold Vol ZQ Dial PadHandset Red/Green LED Indicators Fixed Buttons LCD Display LCD Control Buttons/ Soft Keys Flexible Buttons (also known as Programmable Buttons - PB) Microphone Location StrataIP appears on IP telephones
Telephones and Peripherals DKT3000-series and IP Telephones Strata CTX General Description 06/0329 The 3000-series telephones provide a number of useful features including: Four or 12 Soft Keys for responding to extensive feature prompts. Flexible buttons – customized for each telephone to provide Directory Number, line and feature buttons. Hot Dialing – as soon as any dial pad button is pressed, a CO line or PDN is automatically selected to originate a call. Adjustable button beeps, room noise sensitivity and the ability to turn handset call waiting tone On or Off. The 3000-series digital telephones are available in charcoal gray or ash white. Five 3000-series models are shown below. The DKT3001 is shown on page 31. DKT3014-SDL 14-Button Digital Large LCD Speakerphone DKT3010-SD 10-Button Digital LCD Speakerphone DKT3020-SD 20-Button Digital LCD Speakerphone DKT3010-S 10-Button Digital Speakerphone DKT3020-S 20-button Digital Speakerphone
Telephones and Peripherals DKT3000-series and IP Telephones 30Strata CTX General Description 06/03 Liquid Crystal Display (LCD) Models The DKT3010-SD and DKT3020-SD models display up to 24 characters x two lines of information and provide four Soft Keys. The DKT3014-SDL has 12 Soft Keys and a 24-character by eight-line LCD that can be tilted to various levels for optimum viewing. From the idle screen (see Figure 11), you can access telephone directories and speed dial lists of names or departments, internal or external to the telephone system. You can page forward or backward, or search by name or letter within a list. Figure 11 DKT3014-SDL LCD Screen All LCD telephone models can provide: Advisory Messages Automatic Number Identification (ANI) Caller ID, Name and Number with call history Contrast adjustment (16 levels) Date/Time of Day Dialed Number Identification Service (DNIS Name and Number) Feature Prompting Soft Keys that are used as an alternative to access codes or feature buttons. Station users can access features by responding to LCD prompts. Speakerphones All DKT3000-series phones, except the DKT3001, are speakerphones which provide the following: Handsfree Call Origination – Enables users to place calls, listen and talk back without lifting the handset. Handsfree Answerback – Enables users to answer internal calls without lifting the handset. Speaker OCA – Enables users to receive a call over the telephone speaker when busy on an existing handset call. This feature is not available on the IPT1020-SD. The DKT2020-FDSP (Full-duplex speakerphone) enables handsfree speakerphone use with the option to switch between “full-duplex” (concurrent speech) and “voice switch” (alternating conversation between telephones). It also works with an optional, external, super-directional microphone (RFDM) for enhanced full duplex performance. 5860 Soft Keys Feature Scroll Mode Page FEB 19 MONDAY 12:00FRED S NO. 3371 DIRECT SS SYSTEM SD PERSONAL SD EXTERNAL DIR INTERNAL DIR Scrolling DirectoriesDirect Station Selection System Speed Dial Personal Speed Dial Direct Station Selection System Speed Dial Search by Initials
Telephones and Peripherals IP Telephone Strata CTX General Description 06/0331 IP Telephone Toshiba offers an Internet Protocol (IP) Telephone model, the IPT1020-SD (shown right). The BIPU-M2A PCB IP telephone interface must be installed in the Strata CTX100 or CTX670 (for more details, see “IP Telephone Features” on page 62). The IPT1020-SD is a 20-button speakerphone model equipped with an LCD that displays two rows of 24- characters. The speakerphone enables users to make and receive outside and internal calls without lifting the handset. A full-duplex speakerphone is not supported. The IPT has the following features: Full DKT feature set (except Speaker OCA), but supports OCA through the handset IPT Anywhere Automatic Configuration Terminal Authentication (security) Supports Digital Add-on Modules (DADM3120) Built-in headset interface for headsets and external speaker connection (HESB) DKT3001 The DKT3001 is a Digital Single Line Telephone (shown right). It looks similar to the other 3000-series telephone, but it has a smaller footprint. It is narrower because there are no flexible buttons and no LCD. DKT3001 is not a speakerphone and does not have a button, so it does not support handsfree answerback or call origination. The DKT3001 connects to same digital station port as other 3000-series digital telephones. This makes it compatible with all Strata CTX and Strata DK systems. Features The DKT3001 supports many features of the other 3000-series digital telephones, including: On-hook dialing Headset/Loud Ringer Interface (BHEU) Line button with a red LED. The Line button for the DKT3001 is the [PDN] on this telephone. button (conference/transfer) button button (used for Redial or can be programmed as a Flexible button) button (used for retrieving messages or can be programmed as a Flexible button) Message Waiting LED Volume Up/Volume Down button 6742 3532
Telephones and Peripherals DKT3001 32Strata CTX General Description 06/03 Handset Off-hook Call Announce (OCA) Most DKT features through dialed feature access codes The DKT3001 has many additional feature advantages over standard, analog telephones: Automatic Line Selection Background Music with station control Off-hook Call Announce over handset Exclusive Hold The DKT3001 does not support Handsfree Answerback, Speaker OCA, Add-on module (DADM3020) or PC Interface Unit (BPCI). Tilt Stands Two models of desktop telephone tilt stands are available. The BTSD telephone tilt stand attaches to the base of any 3000- or 2000-series telephone, IPT1020-SD or DSS console. The BSTA tilt stands support 3000-series digital telephones and IPT telephones with one or two Add-on modules. Both types of tilt stands can adjust to four different angles. 5864
Telephones and Peripherals Telephone Upgrade Options Strata CTX General Description 06/0333 Telephone Upgrade Options Upgrade options for the Toshiba 3000-series digital telephones and IP telephones are described below. Digital Add-on Modules (DADM3120, DADM3020) The DADM3120 adds 20 feature buttons to the IPT1020-SD or the DKT3000-series telephones. The DADM3020 (shown right) adds 20 feature buttons to DKT3000-series telephones only. Both the DADM3120 and the DADM3020 provide the same functions, but they are not interchangeable. Both the DADM3120 and the DADM3020 have 20 flexible feature buttons that can be assigned as CO line, Directory Number, DSS, One Touch Speed Dial or any other flexible feature. Add-on modules connect directly to the telephones and do not require an additional interface circuit (port). Up to two DADMs can be attached to a telephone to provide 40 buttons to supplement the telephone’s 10 or 20 buttons. The CTX supports a limited number of DADMs per cabinet (see Table 4 on page 11 for the capacities of different common control units). Telephones with Add-on modules cannot support the Integrated PC Interface (BPCI). Direct Station Selection (DSS) Console The DDSS3060 console (shown right) is for system attendants. The DDSS3060 operates alongside a digital telephone and have 60 flexible feature buttons. These flexible feature buttons can be assigned as CO line, Directory Number, DSS, One Touch Speed Dial or any other flexible feature. The DDSS3060 is not compatible with the IPT1020-SD. Up to eight consoles can operate with one digital telephone; 16 consoles max. per system. The DDSS3060 console uses LEDs to indicate call and feature status; the DDSS has dual red and green LEDs to help further define status, such as station in DND status. The DDSS3060 console connects to a digital station port on the ADKU, BDKU, BDKS or PDKU card. 5843 5842
Telephones and Peripherals Telephone Upgrade Options 34Strata CTX General Description 06/03 Integrated PC Interface (BPCI) An optional BPCI can be installed inside any 3000-series telephone to provide a USB connection to a PC with Microsoft® Windows® Telephony Application Programming Interface (TAPI) applications. Information such as ANI, DNIS, and Caller ID data is sent from the digital telephone/BPCI to a computer to provide information for “pop-up” screens. The Telephone Service Provider Interface (TSPI) PC software is included with each BPCI. The BPCI also enables simultaneous Computer Telephone Integration (CTI) and voice features, without the need of a modem or an extra outgoing line. The PC Interface (BPCI) cannot be installed in digital phones shared with the Cordless DKT-2004- CT telephone, DKT3001 single line telephones, or telephones that have Speaker OCA Interface (BVSU) or Add-on modules. Headset/Ringer Interface (BHEU) The BHEU provides interfaces for both a headset and a loud ringing speaker for DKT3000-series telephones. The optionally used amplifier in the BHEU enables users to adjust the headset volume with the volume button on their telephone. With the loud amplified speaker feature, the speaker amplifies the ringing or voice announcement of an incoming call. The HESB speaker box is required for the loud ringing speaker and is normally mounted on a wall near the telephone. BHEU can be installed in the same telephone that has BPCI or BVSU modules installed. The BHEU is not required on the IPT1020-SD telephone which has a built-in headset interface. Speaker Off-hook Call Announce (BVSU) BVSU-equipped digital telephones can receive Speaker OCA which enables stations to receive internal calls over their speaker while on another call using the handset. The BVSU is not required in a telephone to originate OCA calls or in a digital telephone that receives OCA calls through the handset or headset. Speaker OCA Interface (BVSU) cannot be installed in DKT3001 telephones or in telephones with a PC Interface (BPCI). The BVSU cannot be installed in the IPT1020-SD telephones. IPT1020- SDs do not support Speaker OCA, but they do support Handset OCA.
Telephones and Peripherals Cordless Digital Telephones Strata CTX General Description 06/0335 Cordless Digital Telephones Toshiba offers two cordless digital telephone models, the DKT2204-CT and the DKT2304-CT (see photos in this section). These compact cordless digital telephones bring mobility and productivity to office telephones. Greater call access cuts down on leaving messages and playing “telephone tag.” The DKT2204-CT and DKT2304-CT telephones operate from the same digital station port as the DKT3000-series digital telephone. They cannot receive Group Pages or All Call Pages. They can be attached to a Toshiba DKT3000- or 2000-series corded digital telephone or used as a stand- alone. If a cordless telephone is attached to a DKT3000, the DKT3000 must be put into 2000- mode. Some of the features for both cordless models include: Liquid Crystal Display (LCD) that wraps using two lines, total of 32 characters Ringer and handset volume control Single button access to: Conference, Hold, Redial, Message and Transfer features Four programmable function buttons Charging stand AutoStandby AutoTalk Vibrate ringer alert Out-of-range protection Low-battery protection system Headset jack (2.5mm) Stand-alone or DKT operation High quality ultra-secure conversation with 32Kbps Adaptive Differential Pulse Code Modulation (ADPCM) voice code combination. Three ring tones NoteThe handset and base unit of each cordless telephone is equipped with the same security code. In order for a handset to operate, it must be installed with the matching base unit. A feature comparison of the DKT2204-CT and DKT2304-CT is provided in Ta b l e 1 7. Table 17 DKT2204-CT and CTX DKT2304-CT Feature Comparison FeatureDKT2304-CTDKT2204-CT Transmission900 MHz Digital Narrow Band900 MHz Digital Spread Spectrum Number of Channels30 Channels10 Channels Talk Time7 Hours6 Hours Stand By Time120 Hours96 Hours Battery TypeNiMH BatteryNi-Cd Battery
Telephones and Peripherals Cordless Digital Telephones 36Strata CTX General Description 06/03 DKT2204-CT The DKT2204-CT uses 900MHz Digital Spread Spectrum Technology, which offers unparalleled range and the best channel separation in the industry. It’s the best defense against unwanted interference and it provides superior voice communication security. The DKT2204-CT provides: Unsurpassed range, two to three times greater than conventional analog cordless telephones. Clarity that is so good, it is indistinguishable from corded telephones in most environments. Maximum security for up to 10 cordless digital telephones that is almost impossible to scan. A wall-mountable separate base and charging unit are provided with the telephone. Handset measurements in inches: 2.2 wide x 1.66 deep x 8.66 tall. For base and charger measurements, see Table 31 on page 93. NoteThe DKT2204-CT works with Strata CTX and Strata DK telephone systems (except Strata DK24/56/96, Release 3). DKT2304-CT The CTX DKT2304-CT uses 900 MHz Digital Narrow Band technology that provides: Unsurpassed range, two to three times greater than conventional analog cordless telephones. Clarity that is so good, it is indistinguishable from corded telephones in most environments. Maximum security for up to 30 cordless digital telephones that is almost impossible to scan. This DKT2304-CT handset is much smaller than previous models. Measurement in inches: 2.0 wide x 1.25 deep x 5.5 tall. For base and charger measurements, see Table 31 on page 93. 6828 6829