Toshiba Strata Se, Strata Vie General Description Manual

							PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 59 
PROGRAM 9#XX 
DOOR PHONE ASSIGNtiENTS 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial ~~~~ on the dial pad (XX = the number 
SPKR LED flashes continuously. 
of the station(s) to be programmed). CO LEDs indicate present data. 
4! Refer to the System Record Sheet. 
An X on the record sheet means the LED shoulc 
Using the appropriate keys, turn their ass+ 
be on. 
ciated LEDs on or off, as required. If the LED is already on, depressing its associatec 
l LED ON q Access allowed. key will turn it off and vice versa. LEDs may be 
l Each CO key/LED represents itself-that 
turned off and on until the desired pattern is set 
is, if LED 01 is on, then the station being 
programmed (XX) is allowed access to 
CO1 , etc. 
5) Depress the m key to place new data in 
All station 13/l 7 LEDs (except 19) go off. 
memory. 
6A) Return to Step 2 in order to continue with 
this program 
or . . 
66) Go to Step 2 in’another program table 
. . or . . . 
6C) Transfer data into working memory per Par- . 
agraph 02.06. 
SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
New data is stored, previous data is erased. 
For /;nultiple station programming, refer to Paragraph 02.10. 
-85-  
						

							PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 60 
PROGRAM “X# 
FLEXIBLE ACCESS CODE NUMBERING 
1) Lock in the SET switch on the HKSU. 
Binary Numbers: 
X = LED on 
All LEDs off = no data 
. . . or . 
6B) Transfer data into working memory per Par- 
agraph 02.06. SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
New data is stored, previous data is erased. 
f 
-86-  
						

							PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY : 988 
TABLE 61 
PROGRAM *XX 
FLEXIBLE INTERCOM NUMBERING 
1) Lock in the SET switch on the HKSU. 17LED 19on. ’ 
em IS In program mode. 
rlcxlon Override 
X = LED on 
All LEDs off = no data 
the m key to place new data in 
agraph 02.06. 
-87-  
						

							PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 62 
PROGRAM #lXX*YY 
AUTOMATIC DIALING PROGRAMMING FROM STATION 17 
(Requires LCD EKT) 
~I SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7 
LCD: PROGRAM MODE 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD: PROGRAM NO.?. 
3) Dial jpfla on the dial pad. LCD: (displays dialed digits) 
XX = the number of the station(s) to be pro- 
grammed (XX must = 10 for System Auto 
Dial). 
4) Depress the P key. 
5) Refer to the System Record Sheet. 
Dial W (Y’f = Auto dial code: 10 - 49, per- 
sonal; 60 - 99, system). 
6) Depress the auto dial digits (insert pauses via 
key 
q and flashes via key q . 
7) Depress the m key to place new data in 
memorv. LCD: (displays dialed digits) 
LCD: (displays dialed digits) 
DATA = 
8A) Return to Step 2 in order to continue with 
this program 
86) Go to Step 2 in’an:ther program table 
. . . or . . 
8C) Transfer data into working memory per Par- 
agraph 02.06. LCD: (displays dialed digits) 
All station 13/l 7 LEDs (except 19) go off. 
LCD: DATA PROGRAMMED B 
SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
New data is stored, previous data is erased. 
-88-  
						

							TOSHIBA SYSTEM PRACTICES STRATA Se & We 
. ELECTRONIC KEY TELEPHONE SYSTEM 
SYSTEM RECORD 
JANUARY 1988 
Strata 
RELEASE 2 
SYSTEM RECORD  
						

							L 
t 
STRATA Se & We 
SYSTEM RECORD 
JANUARY 1988 
PROGRAM 01 -SYSTEM ASSIGNMENTS (Basic) 
CEY/LED X LED ON LED OFF 
17 “Transfer Privacy 
Alternate potnt answer of transferred CO 
line 
16 System Speed Dial Override of Toll 
Restricted 
Restriction 
15 Eight CO Line Groups (91 - 98) 
One CO Line Group (9) 
14 Two CO Line Conferencing-Inhibit 
Allowed 
13’ LCR Access 
No LCR 
12 DP Make Ratio 33% 40% 
11 DTMF Signal Time 160ms 
80ms 
09 Non-privacy Privacy 
07 Station 17/i O-key EKT 
Station 17/20-key EKT 
06 Incoming Call Abandon/8-sec. 
6-sec. 
05 3-sec. PauseAfter Flash 
1.5-sec. Pause 
04 Insert Pause After Flash 
No Pause _-- 
X = Select (LED on) Initialized Data: All LEDs off 
PROGRAM O#l 
KEY/LED X LED ON LED OFF 
17 Door Lock Timeout (6 sec.) 3 sec. 
08 Door Phone 28 Door Lock Door Phone 
07 Door Phone 2C Busy-out No Busy Signal 
06 Door Phone 28 Busy-out No Busy Signal 
05 Statlon i2/14 Door Phone 
EKT 
04 Door Phone 1C Alarm (Station 13 only) Door Phone 
03 Door Phone 1 B Door Lock 
Door Phone 
02 Door Phone 1C Busy-out No Busy Signal 
01 Door Phone 1 B Busy-out 
No Busy Signal 
I 00 Station 11/l 3 Door Phone EKT 
X = Select (LED on) Initialized Data: All LEDs off  
						

							STRATA Se & Vie 
SYSTEM RECORD 
JANUARY 1988 
PROGRAM 02-SYSTEM ASSIGNMENTS (Options) 
KEY/LED1 X 1 LED ON 
13 Station 15/23 assigned to Trunk-to-trunk 
Connection 
12 Station- 14/22 assigned to Trunk-to-trunk 
Connection 
11 
10* 
06 
04 
02’ 
01 
00 Stations 16/l 8 & 17/l 9 assigned to 
Amplified Conference 
Stations 24 & 25 assigned to Amplified 
Conference 
ACB Warning Tone 
Display Dialed Number-l minute 
Night Ringing Over Ext. Page-Allowed 
BGM Over Ext. Page-Allowed 
Ext. Page Included With All Call Page 
LED OFF 
EKT 
EKT 
Not Amplified 
Not Amplified 
No Warning Tone 
15 seconds 
Not Allowed 
Not Allowed 
Not Included 
X = Select (LED on) Initialized Data: All LEDs off 
“Vie only 
AMP CONF: TRK TO TRK: 
Se-16/17 Se-14, 15 
We-1 8/l 9, 24125 Me-22, 23 
PROGRAM 0#2 
ACCOUNT CODE DIGIT LENGTH and MODEM SPEED 
KEY/LED.1 X 1 LED ON LED OFF 
I 
17 
I ( Repeat Ringing Standard Ringing 
15 1 SDTU Modem Speed-1200 bps 300 bps 
I 
04 Account Code Digit Length 
03 Account Code Digit Length 
02 Account Code Digit Length 
01 Account Code Digit Length 
00 Account 
Code Diait Lenath 
X = Select (LED on) Initialized Data: LEDs 01 & 02 on; all other LEDs off. 
NOTE. 
LEDs 00 - 04 set the Account Code Digit Length (4 - 15 Digits) in binary format 
per the 
table below. 
SMORACCOUNTCODE 
DIGIT LENGTH TABLE 
X = LEDs on All LEDs off = no data 
. 
-2-  
						

							STRATA Se & Vie 
SYSTEM RECORD 
JANUARY 1988 
PROGRAM 03 
SYSTEM ASSIGNMENTS (Outions) 
KEY/LED1 X 1 LED ON 
LED OFF 
X = Select (LED on) lnltialized Data: LEDs 00, 02, 05 on; all other LEDs off 
+ Vie only; see Program 08 for group assignments. 
PROGRAM 04-CO LINE OUTPULSING SELECTION 
Initialized Data: All LEDs off 
-3-  
						

							a STRATA Se & We 
SYSTEM RECORD 
JANUARY 1988 
PROGRAM #4 
-4-