Yamaha 01v 96 I Manual

Panning Aux Sends41
01V96i—Reference Manual
Aux Outs3LEVEL
This field displays in dB the level of the Aux Send cur-
rently-selected by the cursor.
2.Move the cursor to either the DISPLAY LEVEL 
or PRE/POST button, then press [ENTER] to 
display the Level or Pre/Post parameters.
3.If you selected the PRE/POST button in Step 
2, move the cursor to the desired Input Chan-
nel and Aux intersection, then press the 
[ENTER] button to change the signal source 
point.
4.If you selected the LEVEL button in Step...

42Aux Outs
01V96i—Reference Manual
6.To link the Input Channel Pan setting with the 
A u x  S e n d  P a n  s e t t i n g ,  m o v e  t h e  c u r s o r  t o  t h e  
INPUT PAN LINK ON/OFF button, then press 
[ENTER].
The pan positions on the Pan page are copied to the Aux 
pan setting, and the pan controls on both pages are 
linked.
Copying Channel Fader 
Positions to Aux Sends
While Aux Sends are in Variable mode, you can copy all Input 
Channel fader positions on one layer to the corresponding 
Aux...

Input & Output Patching43
01V96i—Reference Manual
Input & Output Patching
Input & Output 
Patching
This chapter describes how to patch (assign) signal paths 
within the 01V96i to its inputs, outputs, and slot channels
Input Patching
Signals input at INPUT connectors 1–16, ADAT IN connec-
tor, 2TR IN DIGITAL connectors, and Slot I/O card are 
patched to Input Channels for use.
Patch example:
By default, the Input Channels are patched as follows:
You can change these patches, if you desire. 
Input...

44Input & Output Patching
01V96i—Reference Manual
3.Press [ENTER] to confirm the change.
Output Patching
The 01V96i’s Stereo Out, Bus Out 1–8, Aux Out 1–8 signals 
can be patched to any outputs, ADAT OUT output channels, 
and slot output channels.
Patch example:
By default, the following signal paths are patched to outputs, 
ADAT OUT output channels, and slot output channels:
You can change these patches, if you desire. The procedure for 
patching signals to output varies depending on the output...

Output Patching45
01V96i—Reference Manual
Input & Output Patching3.Press [ENTER] to confirm the change.
Patching the USB Outputs
By default, the following output signals are assigned to USB 
OUT.
If you want to change or verify this patching, proceed as fol-
lows.
1.Press the DISPLAY ACCESS [PATCH] button 
repeatedly until the Patch | USB Out page 
appears.
The parameter boxes underneath each number indicate 
the currently-assigned signal routing. The meaning of 
these indicators are explained below....

46Input & Output Patching
01V96i—Reference Manual
Patching Direct Outs
Input Channel 1–32 signals can be directly patched to any 
outputs or slot outputs, as well as Bus Out 1–8 and Stereo Out. 
This patching is convenient when you want to record the 
input signal of each Input Channel to an individual track on a 
connected DAW.
1.Press the DISPLAY ACCESS [PATCH] button 
repeatedly until the Patch | Direct Out page 
appears.
The parameters on this page are described below.
11–32
These boxes indicate the...

Insert Patching47
01V96i—Reference Manual
Input & Output Patching
Insert Patching
The 01V96i’s Input Channels and Output Channels (Stereo 
Out, Bus Out 1–8, Aux Out 1–8) feature independent Insert 
Ins and Outs. Inputs, outputs, ADAT connector channels, slot 
channels, and internal effects processor inputs and outputs 
can be patched to the Output Channel Insert Ins and Outs. In 
this way, you can send the signals to external effects proces-
sors for processing, or insert internal effects.
Individual...

48Input & Output Patching
01V96i—Reference Manual
5.Move the cursor to the desired IN parameter 
box, then rotate the Parameter wheel or 
press the [INC]/[DEC] buttons to select the 
inputs, ADAT IN channels, or slot input chan-
nels to be patched to the Insert In.
Refer to the explanation regarding the Input Patch for 
more information on the parameter values (see page 43).
6.Press [ENTER] to confirm the change.
7.To enable the specified Insert patch, move 
the cursor to the ON/OFF button in the 
INSERT...

Monitoring49
01V96i—Reference Manual
Monitoring
Monitoring
This chapter explains how to set up monitoring and use the 
Solo function on the 01V96i.
Monitor
The 01V96i features the stereo signal path to feed the moni-
tors. The monitoring signal source is patched to MONITOR 
OUT connectors L & R and the PHONES connector.
The following diagram illustrates the monitoring signal flow.
•SOLO bus
This special bus routes soloed Input Channels to the 
Monitor outputs, bypassing Bus 1–8 and the Stereo Bus....

50Monitoring
01V96i—Reference Manual
3SEL MODE
This parameter determines how the Input Channels will 
be soloed when you press the [SOLO] button of each 
Channel. There are two options.
•MIX SOLO
In Mix Solo mode, any number of channels can be soloed 
simultaneously.
•LAST SOLO
In Last Solo mode, only one channel can be soloed at a 
time by pressing the [SOLO] button. The Solo function 
that was previously enabled for channels is automatically 
cancelled.
4LISTEN
This parameter determines the source of...