Yamaha Rx5 Manual

56 

57
TAPE SYNC APPLICATlONS
This system example shows how Tape Sync can be used with the RX5. It uses the RX5together with a DX7 Synthesizer, an MT1X Multitrack Cassette Recorder, and an audio
mixer.
The following procedure illustrates one possible way of using this MIDI/Tape Sync
system.
1.Edit a Song on the RX5. Initial Tempo or Tempo Change commands can be included.
2. With the RX5 set to Internal Sync, play the Song at the desired tempo, and record
the Tape Sync signal onto track 1 of the MT1X. Tempo...

58 

59 

60 

61 

62 

63
OPERATIONSetting of the Receive Channel is different for the NoteNumber and Tunable Note Modes.
NOTE NUMBER MODE1. With the RX5 set to Note Number Mode, press MIDI and select Job #02. The LCD
will show the RX5’s current MIDI Receive status.
2.Use the +1/YES and -1/NO keys, or the DATA ENTRY slider to set the MIDI Receive
channel. Range: 01 — 16.
TUNABLE NOTE MODE1. With the RX5 set to Tunable Note Mode, press MIDI and select Job #02. The LCD
will show the RX5’s current MIDI Receive status. The cursor...

64
OPERATION
1.Press MIDI and select Job #04. The LCD will show the last function that was selected
in this Job.
2.Press “1” to select the “VOICE” function (corresponding to the Note Number Mode)
or “2” to select the “PITCH” function (corresponding to the Tunable Note Mode).
VOICE FUNCTION1. Use the DATA ENTRY slider or the -1/NO and +1/YES keys to select the voice.
2. Press ACCENT 2 to move the cursor to the Note Number position. Use the DATA
ENTRY slider or the -1/NO and +1/YES keys to set the Note...

65