Yamaha Rx5 Manual

46 

472. To continue the Save operation, press +1/YES.
You now have a chance to cancel this operation by pressing -1/NO, if you do not
wish to erase data in the cartridge.
3. To save the data, press +1/YES again.
followed by
JOB #03: SAVE SINGLE PATTERN.FUNCTION 
To save the data of a single selected Pattern onto YamahaRAM4 Data Cartridge.
This operation allows you to save the sequence data for a single Pattern, Any Pattern
destination may be selected.
NOTE: If the Pattern destination selected in your...

48You now have a chance to cancel the Save operation by pressing -1/NO, if you do
not wish to erase data in the cartridge.
6. To save the data, press +1/YES again.
Followed by
LOADlNG DATAJOB #11:  LOAD SEQUENCE AND VOlCE
DATA
JOB #12: LOAD SEQUENCE DATA
JOB #14: LOAD VOICE DATA
FUNCTIONTo load sequence and voice data from Yamaha RAM4 Data
Cartridge into the RX5Load operations allow you to load the sequence data for up to 100 Patterns, 20 Songs
and 3 Chains and/or the voice data for all 64 voices stored...

49
OPERATION
1.Press PATTERN/SONG until the LCD indicates Pattern Mode, then use the Numeric
Key Pad or the -1/NO and +1/YES keys to select the pattern destination to which
you wish to load data.
2. Press CASSETTE/CARTRIDGE once or twice to enter the Cartridge Mode, then
select Job #13.
3. To continue the Load operation, press +1/YES.
4. Use the Numeric Key Pad to select the number of the Pattern you wish to load.
Example: 11.
5.To continue the Load operation, press ACCENT 2. The cursor will move to the...

50 

51FORMATTING
JOB #30:  FORMAT CARTRIDGE
FUNCTIONTo format the RAM4 Data Cartridge for use with the RX5.This function MUST be carried out on any new Yamaha RAM4 Data Cartridge that you
purchase for use with your RX5, prior to using the cartridge for saving data.
OPERATION
1.Insert your new RAM4 Data cartridge into the Data Cartridge slot on the rear of the RX5.
2.Press CASSETTE/CARTRIDGE until the LCD indicates Cartridge Mode, then select
Job #30.
3. To continue the Format operation, press +1/YES.
You can...

52 

53
OPERATIONOperation is identical for the above four Jobs.1. Press CASSETE/CARTRIDGE until the LCD indicates Cassette Mode, then select
Job #01.
2. To save the data, start the cassette player in RECORD, and press +1/YES.
Followed by
JOB #03: SAVE SlNGLE PATTERN.
FUNCTIONTo save the data of a single selected Pattern onto cassette tape.This operation allows you to save the sequence data for a single Pattern.
OPERATION
1.Press PATTERN/SONG until the LCD indicates Pattern Mode, then use the NumericKey Pad...

54 

55
VERlFYlNG DATA
JOB #21: VERIFY SEQUENCE AND VOICE
DATA
JOB #22: VERIFY SEQUENCE DATA
JOB #24: VERIFY VOICE DATA
JOB #25: VERIFY SET-UP DATA
FUNCTIONTo verify that sequence and/or voice data, or set-up data, hasbeen correctly saved onto cassette.
OPERATIONOperation for the above four Jobs is identical. These Jobs
correspond to (and should be carried out subsequent to)Save Jobs, as follows.
JOB #21 verifies JOB #01.
JOB #22 verifies JOB #02.
JOB #24 verifies JOB #04.
JOB #25 verifies JOB #05.
1. After...