Yamaha Rx5 Manual
Have a look at the manual Yamaha Rx5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
472. To continue the Save operation, press +1/YES. You now have a chance to cancel this operation by pressing -1/NO, if you do not wish to erase data in the cartridge. 3. To save the data, press +1/YES again. followed by JOB #03: SAVE SINGLE PATTERN.FUNCTION To save the data of a single selected Pattern onto YamahaRAM4 Data Cartridge. This operation allows you to save the sequence data for a single Pattern, Any Pattern destination may be selected. NOTE: If the Pattern destination selected in your cartridge already contains data, it will be erased when you perform a Save Single Pattern operation, so check that this data is not needed. Voice Data contained in the cartridge will NOT be affected by this operation. OPERATION 1.Press PATTERN/SONG until the LCD indicates Pattern Mode, then use the Numeric Key Pad or the -1/NO and +1/YES keys to select the pattern you wish to save. 2.Press CASSETTE/CARTRlDGE until the LCD indicates Cartridge Mode, then select Job #03. 3. To continue the save operation, press +1/YES. 4. Press ACCENT 2 to move the cursor to the right, and use the Numeric Key Pad to select the Pattern Destination number. Example: 00. You can use the ACCENT 2 key to move the cursor backwards and forwards to allow you to reset the Pattern and Pattern destination numbers. 5. Press +1/YES to continue the Save operation.
48You now have a chance to cancel the Save operation by pressing -1/NO, if you do not wish to erase data in the cartridge. 6. To save the data, press +1/YES again. Followed by LOADlNG DATAJOB #11: LOAD SEQUENCE AND VOlCE DATA JOB #12: LOAD SEQUENCE DATA JOB #14: LOAD VOICE DATA FUNCTIONTo load sequence and voice data from Yamaha RAM4 Data Cartridge into the RX5Load operations allow you to load the sequence data for up to 100 Patterns, 20 Songs and 3 Chains and/or the voice data for all 64 voices stored in the RAM4 cartridge. JOB #13: LOAD SINGLE PATTERN.NOTE (JOB #11): If the RX5 already contains data, it will be completely erased when you perform a Load Sequence and Voice Data operation, so check that this data is not needed. NOTE (JOB #12): If the RX5 already contains sequence data, it will be erased when you perform a Load Sequence Data operation, so check that this data is not needed. NOTE (JOB #14): If the RX5 already contains voice data, it will be erased when you perform a Load Voice Data operation, so check that this data is not needed. OPERATIONOperation is identical for the above three Jobs. 1.Press CASSETTE/CARTRIDGE until the LCD indicates Cartridge Mode, then select Job #11, #12 or #14. Example: Job #11.2. To continue the Load operation, press +1/YES. You now have a chance to cancel this operation by pressing -1/NO, if you do not wish to load the data. 3. To load the data, press +1/YES again. Followed by FUNCTIONTo load the data of a single selected Pattern from Yamaha RAM4 Data Cartridge into the RX5.This operation allows you to load the sequence data for a single Pattern. Any Pattern may be loaded into any Pattern destination. NOTE: If the Pattern destination selected already contains data, it will be erased when you perform a Load Single Pattern operation, so check that this data is not needed. Voice Data contained in the RX5 wilt NOT be affected by this operation.
49 OPERATION 1.Press PATTERN/SONG until the LCD indicates Pattern Mode, then use the Numeric Key Pad or the -1/NO and +1/YES keys to select the pattern destination to which you wish to load data. 2. Press CASSETTE/CARTRIDGE once or twice to enter the Cartridge Mode, then select Job #13. 3. To continue the Load operation, press +1/YES. 4. Use the Numeric Key Pad to select the number of the Pattern you wish to load. Example: 11. 5.To continue the Load operation, press ACCENT 2. The cursor will move to the right. You can now alter the Pattern destination number, or proceed to Step 7, to continue the Load operation. 6. To alter the Pattern destination number, use the 10-keys. You can use the ACCENT 2 key to move the cursor backwards and forwards to allow you to reset the Pattern and Pattern destination numbers. 7. Press +1/YES to continue the Load operation.You now have a chance to cancel the Load operation by pressing -1/NO, if you do not wish to erase data in the Pattern destination. 8. To Load the Pattern, press +1/YES again. VERIFYING DATA JOB #21: VERIFY SEQUENCE AND VOICE DATA JOB #22: VERIFY SEQUENCE DATA JOB #24: VERIFY VOICE DATA FUNCTIONTo verify that sequence and/or voice data has been correctly saved onto Yamaha RAM4 Data Cartridge. OPERATIONOperation is identical for the above three Jobs. These Jobscorrespond to (and should be carried out subsequent to) Save Jobs, as follows.JOB #21 verifies JOB #01. JOB #22 verifies JOB #02. JOB #24 verifies JOB #04. 1.After saving the data select Job #21, #22 or #24 as appropriate. Example: Job #21. 2. To continue the verify operation, press +1/YES. You now have a chance to cancel this operation by pressing -1/NO. if you do not wish to verify the data.
51FORMATTING JOB #30: FORMAT CARTRIDGE FUNCTIONTo format the RAM4 Data Cartridge for use with the RX5.This function MUST be carried out on any new Yamaha RAM4 Data Cartridge that you purchase for use with your RX5, prior to using the cartridge for saving data. OPERATION 1.Insert your new RAM4 Data cartridge into the Data Cartridge slot on the rear of the RX5. 2.Press CASSETTE/CARTRIDGE until the LCD indicates Cartridge Mode, then select Job #30. 3. To continue the Format operation, press +1/YES. You can now either format the cartridge, or press -1/NO to cancel the Format operation. 4. To format the cartridge, press +1/YES again. Followed byYour RAM4 cartridge is now formatted, and can be used for saving data.
53 OPERATIONOperation is identical for the above four Jobs.1. Press CASSETE/CARTRIDGE until the LCD indicates Cassette Mode, then select Job #01. 2. To save the data, start the cassette player in RECORD, and press +1/YES. Followed by JOB #03: SAVE SlNGLE PATTERN. FUNCTIONTo save the data of a single selected Pattern onto cassette tape.This operation allows you to save the sequence data for a single Pattern. OPERATION 1.Press PATTERN/SONG until the LCD indicates Pattern Mode, then use the NumericKey Pad or the -1/NO and +1/YES keys to select the pattern you wish to save. 2. Press CASSETTE/CARTRIDGE until the LCD indicates Cassette Mode, then select Job #03. 2. To save the data, start the cassette player in RECORD, and press +1/YES. Followed by LOADING DATA JOB #11: LOAD SEQUENCE AND VOICEDATA JOB #12: LOAD SEQUENCE VOICE DATA JOB #14: LOAD VOICE DATAJOB #15: LOAD SET-UP FUNCTIONTo load sequence and/or voice data, or set-up data, from cassette tape, into the RX5.Load operations allow you to load the sequence data for up to 100 Patterns, 20 Songs and 3 Chains and/or the voice data for all 64 voices saved on cassette. Set-up data can also be loaded (refer to Job #05 for a description of Set-ups). NOTE (JOB #11): If the RX5 already contains sequence and voice data, it will be erased when you perform a Load Sequence and Voice Data operation, so check that this data is not needed. NOTE (JOB #12): If the RX5 already contains sequence data, it will be erased when you perform a Load Sequence Data operation, so check that this data is not needed. NOTE (JOB #14): If the RX5 already contains voice data, it will be erased when you perform a Load Voice Data operation, so check that this data is not needed. NOTE (JOB #15): If the RX5 already contains set-up data, it will be erased when you perform a Load Set-ups operation, so check that this data is not needed. OPERATIONOperation for the above four Jobs is identical. These Jobs correspond to (and should be carried out subsequent to) Save Jobs, as follows.JOB #11 loads data that was saved in JOB #01. JOB #12 loads data that was saved in JOB #02. JOB #14 loads data that was saved in JOB #04. JOB #15 loads data that was saved in JOB #05. 1. Press CASSETTE/CARTRIDGE until the LCD indicates Cassette Mode, then select Job #11, #12, #14 or #15. Example: Job #11.
55 VERlFYlNG DATA JOB #21: VERIFY SEQUENCE AND VOICE DATA JOB #22: VERIFY SEQUENCE DATA JOB #24: VERIFY VOICE DATA JOB #25: VERIFY SET-UP DATA FUNCTIONTo verify that sequence and/or voice data, or set-up data, hasbeen correctly saved onto cassette. OPERATIONOperation for the above four Jobs is identical. These Jobs correspond to (and should be carried out subsequent to)Save Jobs, as follows. JOB #21 verifies JOB #01. JOB #22 verifies JOB #02. JOB #24 verifies JOB #04. JOB #25 verifies JOB #05. 1. After saving the data, select Job #21, #22, #24 or #25 as appropriate. Example: Job #21. 2. To verify the data, press +1/YES. Start playback of the cassette, to commence data verifying. If the data has been correctly saved, the LCD will then show If any other messages appear, refer to the ERROR MESSAGES chapter. JOB #23: VERIFY SINGLE PATTERN FUNCTIONTo verify that the data of a single selected pattern has been correctly saved onto cassette. OPERATIONThis Job corresponds to (and should be carried out subsequent to) Job #03, Save Single Pattern. 1.After saving a Pattern, press PATTERN/SONG until the LCD indicates Pattern Mode. and use the Numeric Key Pad to select the number of the Pattern which was saved onto cassette. 2. Press CASSETTE/CARTRIDGE once or twice to select the Cassette Mode, and select Job #23. 3. To verify the data, press +1/YES. Start playback of the cassette, to commence data verifying. If the data has been correctly saved, the LCD will then show If any other messages appear, refer to the ERROR MESSAGES chapter.