Wiring configurations for BLY34 Series – Brushless DC Motor
Connection Lead Wire Connection Lead Wire Color Phase A Yellow Phase B Red Phase C Black Star Configuration
Connect Wires with Wire
Nut Yellow/White & Red/White &
Black/White Phase A Yellow & Black/White Phase B Red & Yellow/White Delta Configuration
Phase C Black & Red/White
NOTE:
1. STAR CONFIGURATION IS DEFAULT.
2. FOR DELTA CONFIGURATION:
REMOVE PLASTIC CAP.
REMOVE 3 SCREWS HOLDING PCB.
ROTATE HALL PCB TO LINE...
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
The MDC010-024031 Speed Controller is a compact, powerful and cost-effective design.
Designed as an open or closed loop 1-Quadrant digital speed controller for Brushless DC
Motors, it can perform complex applications with little effort. The fl exible and high effi ciency
multifunctional operation is a direct result of the wide supply of voltage range...
September 2010L010676
MDC010 - 024031
24V, 2A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
The MDC010-050101 Speed Controller has a very compact design with a high efficiency
1-Quadrant digital output driver which offers a operating voltage of 50VDC, while maintain -
ing a rated output current of a 5A (10A Peak). The controller also offers a large number of
inputs and outputs such as the speed monitor, current limiting, speed ranges,...
MDC010 - 050101
50V, 10A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
June 2013L010678
September 2012 L0104421
MDC050-050051 Series
50V, 5A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
April 2012 L010364
MDC100-012101
12V, 10A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
MDC100-050101
50V, 10A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
April 2012L010364
FEATURES DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
• Maximum Current Limit Setting 1.0-10.0A
• Hall Sensor Feedback
• Constant Velocity Mode
• Shortcircuit Protection
• Brake, Disable and Direction Inputs
• Selectable Ramp Up/Down
• TTL-CMOS Compatible Inputs
• Compact Size (4.45” x 2.66” x 1.48”)
• Dual Mounting Option
The MDC150-050301 driver is designed
to drive DC brushless motors at cur-
rents of up...
April 2012 L010364
MDC150-012301
12V, 30A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
The MDC150-012301 driver is
designed to drive DC brush -
less motors at currents of up to
30A (peak) and 12V. Using hall
sensor feedback, a constant
velocity mode can be selected.
The driver is protected against
over current (cycle-by-cycle or
latched), hall sensor error and
under voltage. When an error
occurs, a fault light notifies the...
FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
The MDC150-050301 driver is designed
to drive DC brushless motors at cur -
rents of up to 30A (peak) and 50V. The
current limit can be set with an adjust -
able potentiometer right on the top of
the driver. It also features hall sensor
feedback and a constant velocity mode
so you can overcome occasional torque
spikes without slowing down.
The...
MDC150-050301
50V, 30A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
April 2012L010356
FEATURES DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
• Maximum Current Limit Setting 5.0-15.0A
• Internal or External Potentiometer Speed
Control
• 2-Quadrant Operation
• Hall Sensor Feedback
• Constant Velocity Mode
• Short Circuit Protection
• Requires 85 - 135 VAC
• Isolated Speed Out
• Isolated Fault Out
The MDC150-120151 driver is designed
to drive DC brushless motors at cur-
rents of up to 15A (peak)...
October 2007 L010430
MDC150-120151
120VAC, 15A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
September 2012 L0104051
MDC151-012301 Series
12V, 30A Brushless DC Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
