FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
The MDC151-012601 driver is designed
to drive DC brushless motors at currents
of up to 60A (peak) and 12V. Using hall
sensor feedback, a constant velocity
mode can be selected. The driver is
protected against over current (cycle-by-
cycle or latched), hall sensor error and
under voltage. When an error occurs,
a fault light notifies the user....
September 2012 L0104781
MDC151-012601 Series
12V @ 60A Brushless DC Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
The MDC151-050301 driver is
designed to drive DC brush -
less motors at currents of up
to 30A (peak) and 50V. Using
hall sensor feedback, a con -
stant velocity mode can be se-
lected. The driver is protected
against over current (cycle-by-
cycle or latched), hall sen -
sor error and under voltage.
When an error occurs, a fault
light notifies...
September 2012 L0104031
MDC151-050301 Series
50V, 30A Brushless DC Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
L010612
MDC151-050601 - Brushless DC Controller
MDC151-050601 - Brushless DC Controller
• Maximum Current Limit Setting from 20.0-
60.0Amps (Peak)
• Internal or External Potentiometer Speed Control
• 0V to 5V External Voltage Speed Control
• 2-Quadrant Operation
• Hall Sensor Feedback
• Constant Velocity Mode
• Short Circuit Protection
• Requires...
1
MDC151-050601
50V @ 60 Input Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
September 2012L010479
FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DIMENSIONS
The MDC200-048051 driver is a veloc -
ity control driver designed to drive DC
Brushless Motors from a supply of
120VAC. With a motor bus voltage
of 48V, maximum phase current of 5A
(peak) and power output of 100W, this
driver eliminates the need for an external
power supply. Using hall sensor feed -
back, a constant velocity mode can be...
September 2012 L0104041
MDC200-048051
110VAC Input Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
L010741
MDC300-120151 - Brushless DC Controller
MDC300-120151 - Brushless DC Controller
• Maximum Current Limit Setting from 5.0 to 15.0Amps
• Internal/External Potentiometer or Voltage Input
Speed Control
• Onboard Potentiometer Ramp Up/Down Adjustment
• 2-Quadrant Operation
• Hall Sensor Feedback
• Constant Velocity Mode
• Short Circuit...
MDC300-120151 Series
120VAC, 15A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
April 2012L010538
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
The MDCKB1-120081-01 driver is designed to drive DC Brushless Motors at currents up
to 8A (peak) and 160VDC. Using hall sensor feedback, a constant velocity mode can be
selected. The driver is protected against over current (cycle-by-cycle), hall sensor error and
under voltage. When an error occurs, a fault light is turned on to notify the user....
September 2012 L0106741
MDCKB1-120081
110VAC, 8A Brushless Controller
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990 fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION
FEATURES
DIMENSIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
DESCRIPTION
The MDCKB1-120081-01 driver is designed to drive DC Brushless Motors at currents up to
8A (peak) and 160VDC. Using hall sensor feedback, a varying velocity mode can be select-
ed. The driver is protected against over current (cycle-by-cycle), hall sensor error and under
voltage. When an error occurs, a fault light is turned on to notify the user....
