Home > Amanda > Communications System > Amanda Telephone Switches Instructions Manual

Amanda Telephone Switches Instructions Manual

Here you can view all the pages of manual Amanda Telephone Switches Instructions Manual. The Amanda manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 71

Chapter 7: Programming the NEC Electra II 63
 The tokens that turn the message waiting light off are in 
c:\amanda\pbx.db\171.off.
This file contains the tokens “7#%U”.
 The dial codes and integration strings used by the switch are in
c:\amanda\pbx.db\171.pbx.
This file contains the following lines:
NEC Electra II (release 3.00+)
####################################################
# NEC Electra Level II                             #
####################################################
dl_dtwait F--...

Page 72

64 Installing and Administering Amanda@SOHO 

Page 73

Chapter 8:
Programming Panasonic KXTD 1232
Using a Panasonic Telephone
You use the KX-T7230 or KX-T7235 telephone to program a Panasonic KXTD 1232.
KX-T7230 KS-T7235
The display provides helpful information, such as what you should do now or what you 
have done.
Both telephones use two information lines for programming. The upper line is called the 
Message Line and the lower line is called the Function Line.
The Message Line shows you what you should do or what you should select. It also 
confirms what...

Page 74

66 Telephone Switching Systems for Amanda@SOHO
Getting Ready
Programming the Panasonic KXTD 1232 can be performed only from Jack 1, and only 
one telephone can be in programming mode at one time. While you are programming, 
your extension is treated as a busy extension.
Before programming, confirm that:
 Your telephone is on-hook.
 No calls are on hold at your telephone.
To start programming:
1. Press PROGRAM * #1234.
1234 is the default system password. Your telephone switching system may have...

Page 75

Chapter 8: Programming Panasonic KXTD 1232 67
SELECT (until VM ap-
pears as group setting)Groupx: VM
->   SEL+ NEXT
Store (the Auto Dial 
key)
End (the Hold key) (see 
telephone diagrams)
Extension Group Assignment: Place jacks that are 
connected to voice mail in their own extension group.602EXT Group Asn
SKP+ CLR  NEXT
NEXTJack NO? ->
SKP+ CLR  NEXT
NEXT (or jack num-
ber)(01 goes to 01-1)#01-1:EXG1
->    SEL NEXT
Type group number #01-1:EXGx
->    SEL NEXT
NEXT to #01-2, #02-
1....#32-2 or #64-2...

Page 76

68 Telephone Switching Systems for Amanda@SOHO
NEXT
(Press 6 if not already 
there.)FWD VM RBT:6
SKP+ CLR  NEXT
NEXT
(Press 7 if not already 
there.)FWD VM BT:7
SKP+ CLR  NEXT
NEXT
(Press 8 if not already 
there.)FWD EXT RBT:6
SKP+ CLR  NEXT
Mailbox ID Code: Make sure that all the jacks/ex-
tension have the value “Not Stored”.609Mailbox ID Code
SKP+ CLR  NEXT
NEXTJack NO?->
SKP+ CLR  NEXT
NEXT#01-1:Not Stored
->  SEL   NEXT
If not “Not Stored” i.e. 
blank, press SHIFT to 
toggle to#01-1:Not Stored
->...

Page 77

Chapter 8: Programming Panasonic KXTD 1232 69
NOTE:To see what extensions are assigned to what jacks, use PROGRAM 
*#1234 003. To see what extension a particular telephone is, use PRO-
GRAM 996.
Type jack number
(for example, 01 is Jack 
1)
NEXTOPE-2:Jack01
->   SEL  NEXT
No Answer Time: Changes the number of times a 
station rings before it is considered unanswered.202No Answer Time
SKP+ CLR  NEXT
NEXTTime: 5 rings
->   SEL  NEXT
Press number of rings
Day Mode: Allows you to specify Amanda as a pri-...

Page 78

70 Telephone Switching Systems for Amanda@SOHO
Forwarding Calls to Voice Mail
Because Amanda does blind transfers, you need to program each telephone to forward 
calls to voice mail when that telephone is busy or not answered.
To program calls to forward to voice mail on a digital telephone:
1. Go off-hook.
2.  Dial 7105 and the first pilot number assigned to voice mail hunt group. 
The fwd/dnd button light will stay on.
To cancel call forwarding:
 Go off-hook and dial 7100. 
There is no way to turn it...

Page 79

Chapter 8: Programming Panasonic KXTD 1232 71
dl_stop              # What to dial when the system performs a shutdown   :
dl_pickup            # What to dial when a port goes off-hook             :
dl_conference        # What to dial to create/record a conference call    :
integration 10 ‘#6rrr’
integration 10 ‘998#rrr#’
integration 10 ‘*eee#’
integration 10 ‘#6rr’
integration 10 ‘998#rr#’
integration 10 ‘*ee#’
integration 10 ‘rrr’ 

Page 80

72 Telephone Switching Systems for Amanda@SOHO 
Start reading Amanda Telephone Switches Instructions Manual

Related Manuals for Amanda Telephone Switches Instructions Manual

All Amanda manuals