Barco Hdx Series Installation Manual

							12. Alignment
Image 12-91
Scenergix, Black level
2. PressENTERto select theBlack Leveladjustments.
Image 12-92
Black level, area
3. Use the▲or▼key to select one of the four size adjustments.
Use the◄or►key to move the green border line to the desired position.
Image 12-93
DLP leakage area
1 Overlap area
2 DLP Leakage area
R5905032 HDX SERIES 23/11/2011227 
						

							12. Alignment
How to adjust
1. PressMenuto activate the menus and selectAlignment→Scenergix→Black level.
Image 12-94
Main menu, alignment
Image 12-95
Alignment, Scenergix
Image 12-96
Scenergix, Black level
2. PressENTERto select and use the▲or▼key to select a color to adjust.
Image 12-97
Black level, adjust
3. Adjust the black level of area A until the black level of area A, B and C are equal. Use the Adjust function Red, Green and Blue
in the Black level menu.
228
R5905032 HDX SERIES 23/11/2011 
						

							12. Alignment
ACB
12
13
11R
G
BRGB
Image 1Image 2
Image 12-98
Black level adjustment
R5905032 HDX SERIES 23/11/2011229 
						

							12. Alignment
230R5905032 HDX SERIES 23/11/2011 
						

							13. Projector Control
13. PROJECTOR CONTROL
Overview
• Projector Control menu overview
• Individual Projector Address
• Projector Common Address
• Serial Communication
•Network
• IR Control switching
•DMX
• Buttons
• Menu position
• Local LCD
• Language selection
R5905032 HDX SERIES 23/11/2011
231 
						

							13. Projector Control
13.1 Projector Control menu overview
Overview table
Level 1 Level 2 Level 3
Projector Control
Projector Address Projector address
Common address
Serial CommunicationBaud rate
Interface standard
Network Wired
DHCP [On] [Off]
IP address
Subnet mask
Default gateway
Wireless
Status
DHCP
IP address
Subnet mask
IR Control IR front
IR back
IR side
DMX Address
Universe
Mode
Art DMX [On/Off]
Monitor
Buttons
Shortcut keys
Standby button
Menu position Menu position
Bar scale position
Local LCDBack light
Time out
Change Language
232
R5905032 HDX SERIES 23/11/2011 
						

							13. Projector Control
13.2 Individual Projector Address
About individual projector address
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the
projector.
This individual projector address can then be used to control the projector via remote control or via a serial connection.
Next to an individual projector address, each projector has also a common address for group control.
How to set the address
1. PressMenuto activate the menus and selectProjector Control→Projector Address→Projector Address.
Image 13-1
Main menu, projector control
Image 13-2
Projector control, projector address
Image 13-3
Projector address
2. PressENTERto activate the address input.
Image 13-4
Projector address, input
3. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
R5905032 HDX SERIES 23/11/2011
233 
						

							13. Projector Control
13.3 Projector Common Address
About common address
A common address can be ’0’ or ’1’.
Any command coming from a remote control programmed with that common address will be executed.
How to set
1. PressMenuto activate the menus and selectProjector Control→Projector Address→Common Address.
Image 13-5
Main menu, projector control
Image 13-6
Projector control, projector address
Image 13-7
Projector address, common address
2. PressENTERto activate the address input.
Image 13-8
Projector common address
234R5905032 HDX SERIES 23/11/2011 
						

							13. Projector Control
13.4 Serial Communication
Overview
• Baud rate setup
• Interface Standard
R5905032 HDX SERIES 23/11/2011
235 
						

							13. Projector Control
13.4.1 Baud rate setup
What can be done ?
The baud rate for to establish a serial communication with a computer can be set.
How to set
1. PressMenuto activate the menus and selectProjector Control→Serial Communication→Baudrate.
Image 13-9
Main menu, projector control
Image 13-10
Projector control, serial communication
Image 13-11
Serial communication, baud rate
2. PressENTERto toggle between the available baud rates.
The following baud rates can be selected:
- 9600
- 19200
- 38400
- 57600
- 115200
236
R5905032 HDX SERIES 23/11/2011