BenQ Rl2450ht User Manual

RL2450H / RL2450HT
User Manual
 

2   
Copyright
Copyright © 2011 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual or otherwise, without the prior written permission of BenQ 
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

  3
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its 
aspiration to realize the ideal of the Bringing Enjoyment N Quality to Life corporate vision 
with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory 
requirement and standards pertaining to environmental management, BenQ has spared no 
efforts in pushing our initiatives further to incorporate life cycle design in the aspects of 
material selection,...

4   
Table of Contents
Copyright ......................................................................................................................................2
Getting started  .............................................................................................................................5
Getting to know your monitor ................................................................................................7
Front view...

  5   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, 
please contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Stand
(for RL2450H)
Monitor Base
(for RL2450H)
Monitor Base
(for RL2450HT)
Quick Start Guide
 RL2450H
RL2450HT
 

6  Getting started  
CD-ROM
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
Video Cable: DVI-D 
(Optional accessory)
Video Cable: HDMI
(Optional accessory)
Consider keeping the box and packaging in storage for use in the future when you may need to transport the 
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children. 
 

  7   Getting to know your monitor
Getting to know your monitor
Front view
Back view
1.  Control buttons
2.  Power button
1
2
3.  AC Power Input jack
4.  Headphone jack
5.  HDMI socket
6.  DVI-D socket
7.  D-Sub socket
8.  Kensington lock slot
9.  Release button
10. Wall mount holes
• Above diagram may vary depending on the model.
• Picture may differ from the product supplied for your region.
345678
9
10
 

8  How to assemble your monitor hardware (RL2450H)  
How to assemble your monitor hardware (RL2450H)
 • If your model came with a height adjustment stand (HAS), refer to Assembling your monitor with a height 
adjustment stand (RL2450HT) on page 14 for details on hardware installation.
• If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the...

  9   How to assemble your monitor hardware (RL2450H)
Gently attempt to pull them back apart to check that 
they have properly engaged.
Carefully lift the monitor, turn it over and place it 
upright on its stand on a flat even surface.
You should position the monitor and angle the screen to 
minimize unwanted reflections from other light sources.
2. Connect the PC video cable
Do not use both DVI-D cable and D-Sub cable on the same 
PC. The only case in which both cables can be used is if they 
are...

10  How to assemble your monitor hardware (RL2450H)  
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without 
the ferrite filter) to the monitor video socket. Connect 
the other end of the cable (at the end with the ferrite 
filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port 
on the monitor. Connect the other end of the cable...