Canon Fax L2000ip User Guide

							Parts of the Machine
1
Before You Start Using This Machine
1-29
Handset (Optional)
\
w q
aRinger Volume Switch
Adjusts the volume of the ringer. Use a pen 
or another pointed object to adjust the 
switch to ‘HIGH’, ‘LOW’, or ‘OFF’.
bSpeaker Volume Switch
Adjusts the volume of the handset so you 
can hear suitable sound from the speaker.
 
						

							Removing the Shipping Material1-30
Before You Start Using This Machine
1
Removing the Shipping Material
All shipping material must be removed. The shipping material is attached inside the main unit 
and inside the paper cassettes to protect delicate parts from vibrations during shipping.
Shipping Tape
1Remove all shipping tape from the unit.
 
						

							Removing the Shipping Material
1
Before You Start Using This Machine
1-31
Packaging Material Inside the Machine
1Gently lift the ADF cover, and remove the protective packing 
material from inside the feeder area.
\
IMPORTANT
• Be sure to remove the orange stoppers.
2Close the ADF cover.
3Open the printer cover.\
Orange 
StopperOrange Stopper
Printer Cover
 
						

							Removing the Shipping Material1-32
Before You Start Using This Machine
1
4Remove the shipping tape of the MP tray and the printer cover.\
5Close the printer cover.
Printer Cover
 
						

							Removing the Shipping Material
1
Before You Start Using This Machine
1-33
Packaging Material from the Paper 
Cassettes
If your machine comes with more than one paper cassette, you can use this procedure for each 
one.
1Pull out the paper cassette, and remove it from the machine.\
2Remove the shipping tape.
3Set the paper cassette down on a flat, stable surface.
 
						

							Removing the Shipping Material1-34
Before You Start Using This Machine
1
4Remove the tape and orange key attached to the paper cassette.
To remove the orange key: While pressing down on the bottom metal plate with 
one hand, turn the orange key counter-clockwise to pull it out.
\
5Select your language from the supplied cassette handling 
precaution label and stick it to the part of the paper cassette 
indicated in the illustration below.
\
The paper cassette is heavy. Be sure to hold both sides when removing or installing it.     
Attach the label here.
 
						

							Removing the Shipping Material
1
Before You Start Using This Machine
1-35
6Reinsert the paper cassette into the machine.
For more details on how to reinsert the paper cassette into the machine, see 
step 6 of “Loading Paper into the Paper Cassettes”, on p. 1-41.
Protective Plastic Sheet
The LCD display on the operation panel is covered with a plastic sheet to protect it during 
shipping. This protective material should be removed before you use the machine.
\
 
						

							Assembling the Machine1-36
Before You Start Using This Machine
1
Assembling the Machine
Follow the instructions in this section to help you assemble the machine, and prepare it for full 
operation.
Installing the Toner Cartridge
Install only a Canon FX7 Toner Cartridge in your machine.
CAUTION
 Installing any other type of cartridge in this machine could damage the machine and void your 
warranty. Leave the toner cartridge in its protective bag until you are ready to install the 
cartridge. Handle the toner cartridge carefully.
1Open the printer cover.
Open the printer cover to its full extent.\
2Remove the toner cartridge from its protective bag.\
 
						

							Assembling the Machine
1
Before You Start Using This Machine
1-37
IMPORTANT
 Save the protective bag and all other shipping material. You will need this material later 
when you dispose of the cartridge after it has run out of toner.
3While holding the cartridge by the ends, rock it gently five or six 
times to distribute the toner evenly inside the cartridge.
\
4Place the cartridge on a stable, flat, clean surface, and snap the 
tab on the side to detach it from the cartridge.
\
5As you steady the cartridge with one hand, remove the tape by 
gently pulling the plastic tab straight out with your other hand.
Use a firm, even pull to avoid breaking the tape.\
Pull straight out
 
						

							Assembling the Machine1-38
Before You Start Using This Machine
1
IMPORTANT
 Do not pull the tab upwards or downwards. The tape may break.
 If the tab breaks off from the tape, pull the tape out by pulling on the end of the tape 
where the tab was originally attached.
 Wash off any toner from your hands or clothing immediately with cold water.
6Insert the cartridge in the direction indicated by the arrow, with 
the FX7 toner label on the cartridge facing up.
Gently slide the toner cartridge into the machine until it is completely down and 
in a level position.
\
CAUTION
 To avoid pinching your fingers between the toner cartridge and the machine, grip 
the cartridge as shown below.
\
Keep the drum slot free of dust
and other foreign objects.Do not touch the protective shutter 
on the bottom of the cartridge.