Canon Imageprograf Ipf825 User Guide

							6.
Access the Page Setup pane. 7.
Select and click a roll paper in the  APaper Source list.
8. Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  16 in. (406.4mm). Note
• If the width of the loaded roll is not displayed in  BRoll Width , click LPrinter Information  on the
Main pane and update the printer information. 9.
In CPage Size , make sure 100*500 is displayed, as registered in  Page Setup.
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
iPF825
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) 3
125
 
						

							10.
Select the  DEnlarged/Reduced Printing check box.
11. Click FFit Roll Paper Width.
12. Confirm the print settings, and click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435
" Printing on Non-Standard Paper Sizes
By specifying the paper size, you can print on non-standard sizes of paper.
There are two ways to print on non-standard paper sizes, as follows. Registering non-standard paper size in the printer driver
After you register non-standard paper sizes, they are listed with standard sizes so that you can choose them anytime as nee-
ded. Note
• These non-standard  paper  sizes  you  register  in  the  printer  driver  are  called  Custom  Paper  Size  in  Windows
and  Custom Sizes  in Mac OS X.Specifying custom paper sizes for temporary use
Because these are sizes you specify temporarily in the printer driver, the sizes will not be available after you exit the appli-
cation. If you want to set up a non-standard paper size so that it will always be available, we recommend registering the
paper size in the printer driver. Note
• These temporary paper sizes you register on the printer are called  Custom Sizes in Windows.
• This can only be configured in Windows.
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as appropriate for your
computer and operating system.
•Printing on Non-Standard Paper Sizes (Windows) →P.126
• Printing on Non-Standard Paper Sizes (Mac OS X) →P.131
Printing on Non-Standard Paper Sizes (Windows)
This topic describes two ways to print on non-standard paper sizes. •Printing by using Custom Size
• Printing by using Custom Paper Size Printing by using 
Custom Size
This section describes how to print using  Custom Size based on the following example.
• Document: Any Type
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes
iPF8253
126
 
						

							•
Page size: Square of non-standard dimensions (430×430 mm [16.9×16.9 in])
• Paper: Sheets
• Paper type: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
1. Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
2. Choose Print in the application menu.
3. Select 
the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.216
")
4. Make sure the  Main sheet is displayed. 5.
In the  AMedia Type  list, select the type of paper that is loaded.
6. After confirming that  DEasy Settings is selected, select from the  EPrint Target list.
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
iPF825
Printing on Non-Standard Paper Sizes (Windows) 3
127
 
						

							7.
Click the  Page Setup tab to display the  Page Setup sheet.8.
Click Cut Sheet in the  LPaper Source list.
9. Click Custom Size in the  APage Size  list to display the  Custom Size Settings dialog box.
10. Confirm that  mm is selected in  Units.
11. Enter 430 (16.9 in) in both Width and Height.
12. Click OK  to close the Custom Size Settings dialog box.
13. Confirm the print settings and print as desired. Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.211
" Printing by using Custom Paper Size
This section describes how to print using Custom Paper Size based on the following example. First, register a non-standard
paper size called  430 mm Square as a Custom Paper Size.
• Document: Any Type
• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
• Paper: Sheets
• Media Type: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes (Windows)
iPF8253
128
 
						

							1.
Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
2. Choose Print in the application menu.
3. Select 
the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.216
")
4. Make sure the Main sheet is displayed. 5.
In the  AMedia Type list, select the type of paper that is loaded.
6. After confirming that  DEasy Settings is selected, select from the  EPrint Target list.
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
iPF825
Printing on Non-Standard Paper Sizes (Windows) 3
129
 
						

							7.
Click the  Page Setup tab to display the  Page Setup sheet.8.
Click  OSize Options to display the  Paper Size Options dialog box.
9. Enter a desired paper name in  Custom Paper Size Name. 430 mm Square is used in this example.
10. Select mm in Units.
11. Enter 430 (16.9 in) in both Width and Height. Note
• If you  select  the  Fix  the  Ratio  of  the  Width  to  Height   check  box,  after  you  enter  a  value  in  either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
12. Click Add to register  430 mm Square.
13. Click OK to close the  Paper Size Options dialog box.
14. Click Cut Sheet  in the LPaper Source list.
15. In the APage Size  list, click the size you added, 430 mm Square.
16. Confirm the print settings and print as desired. Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.211
"
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes (Windows)
iPF8253
130
 
						

							Printing on Non-Standard Paper Sizes (Mac OS X)
This section describes how to register and print  Custom Page Sizes (Mac OS X 10.3.9-10.5)/ Custom Paper Sizes (Mac
OS X 10.6) based on the following example. Here, you will register a non-standard paper size named  430*430 in Custom
Page Sizes  (Mac OS X 10.3.9-10.5)/  Custom Paper Sizes (Mac OS X 10.6).
• Document: Any Type
• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
• Paper: Sheets
• Media Type: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) Note
• The following  procedures  are  based  on  Mac  OS  X  10.5.  The  method  of  setting  up  non-standard  paper  sizes
varies depending on the version of Mac OS X.
1. Create the document in the application.
2. Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
3. Choose Print in the application menu. 4.
Select the printer in the  APrinter list. Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
iPF825
Printing on Non-Standard Paper Sizes (Mac OS X) 3
131
 
						

							5.
Click  Manage Custom Sizes in the  CPaper Size list to display the  Custom Page Sizes dialog box.6.
In Page Size , enter the height and width of the original. Here, enter  43.00 cm in Height and Width.
7. In Printer 
Margins,  enter 0.5  for  the  top  and  side  margins  and  2.3  for  the  bottom  margin.  Here,  measurements  are
entered in centimeters.
8. Double-click  Untitled in the list at left in the  Custom Page Sizes dialog box and enter the paper name—in this case,
430*430.
9. Click OK  to close the Custom Page Sizes dialog box.
10. In the CPaper Size  list, click the size of the original. In this case, click  430*430, the size you registered.
11. If  you  configured  the  settings  using  the  Page  Attributes  dialog  box,  click FOK  to  close  the  dialog  box,  and  then
select  Print from the application software menu.
Enhanced Printing Options 
> Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes (Mac OS X)
iPF8253
132
 
						

							12.
Access the Main  pane.13.
In the AMedia Type  list, select the type of paper that is loaded.
14. After confirming that  DEasy Settings is selected, select from the  EPrint Target  list.
15. Make your selection in the  FPrint Quality  list.
16. Access the Page Setup pane. 17.
Click Cut Sheet in the  APaper Source list. Enhanced Printing Options > Printing banners or at other non-standard sizes >
iPF825
Printing on Non-Standard Paper Sizes (Mac OS X) 3
133
 
						

							18.
In CPage Size , make sure 430*430 is displayed, as registered in  Page Setup.
19. Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435
"
Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes (Mac OS X)
iPF8253
134