Canon Imageprograf Ipf825 User Guide

							5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. After 
confirming that  DEasy Settings  is selected, click  CAD (Color Line Drawing)  or CAD (Monochrome Line
Drawing ) in the  EPrint Target  list. Note
• You can check the settings values selected in the  EPrint Target  list by clicking  GView set..
8. Make your selection in the  FPrint Quality list. Working With Various Print Jobs 
> Printing CAD Drawings >
iPF825
Printing Line Drawings and Text (Mac OS X) 2
25
 
						

							9.
Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source list.
11. Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. Working With Various Print Jobs 
> Printing CAD Drawings >
Printing Line Drawings and Text (Mac OS X)
iPF8252
26
 
						

							12.
Make  sure CPage  Size   on  the Page  Setup  pane  shows  the  original  size  as  specified  in  CPaper  Size   in  the Page
Attributes dialog box—in this case,  ISO A3.13.
Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings (Mac OS X) →P.431
"
14. Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435
" Specifying Colors and Printing CAD Drawings
You can complete color settings when  Color (CAD) is selected in Color Mode.
Colors can be adjusted before printing as follows when  Color Compatibility is selected.Note
• Color 
(CAD)  is displayed when you select  Advanced Settings on the Main sheet and set  Print Priority  to
Line Drawing/Text .Color Compatibility
Color Setting Item Color Setting
Description
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Color (CAD) 3 Print emulating the Canon BJ-W3000/W3050, in colors resembling colors pro-
duced by these printers.
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors resembling colors produced by
these printers. Working With Various Print Jobs 
> Printing CAD Drawings >
iPF825
Specifying Colors and Printing CAD Drawings 2
27
 
						

							Color Setting
Description
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors resembling colors produced by
this printer.
Color (CAD) 6 Print emulating the HP Designjet 4000/4500, in colors resembling colors produced
by these printers. Important
• If you have selected  Color (CAD) 3, Color (CAD) 4, Color (CAD) 5, or  Color (CAD) 6, it is not possible
to match the colors and image quality produced by the specified printer exactly.
For instructions on configuring  Color Compatibility, refer to the following topics.
• Specifying Colors and Printing CAD Drawings (Windows) →P.28
Specifying Colors and Printing CAD Drawings (Windows)
You can complete color settings when  Color (CAD) is selected in Color Mode.Note
• Color 
(CAD)  is displayed when you select  Advanced Settings on the Main sheet and set  Print Priority  to
Line Drawing/Text .
1. Click  start > Printers and Faxes (or Printers ).
2. Select the printer, and then display the printer properties dialog box. Working With Various Print Jobs 
> Printing CAD Drawings >
Specifying Colors and Printing CAD Drawings (Windows)
iPF8252
28
 
						

							3.
Click the  Device Settings tab to display the  Device Settings sheet. 4.
Click  BColor Compatibility  to display the Color Compatibility dialog box. 5.
Select the desired color settings in the  AColor Compatibility list. Note
• For details on color settings, see " Specifying Colors and Printing CAD Drawings →P.27
"
For printing instructions, refer to the following topic. •Choosing the Document Type and Printing Conditions (Windows) →P.59
HP-GL/2 Printing
This printer supports the original Canon GARO printer control language as well as HP-GL/2 and HP RTL( *1 →P.30
)
emulation.( *2 →P.30
) When printing from applications that support HP-GL/2 output, specify HP-GL/2 in the applica-
tion's plotter output settings. Note
• For instructions on configuring these settings, refer to the software documentation. Working With Various Print Jobs > Printing CAD Drawings >
iPF825
HP-GL/2 Printing 2
29
 
						

							The printer automatically switches to the corresponding processing depending on whether a GARO, HP-GL/2, or HP RTL
job is received. Configure the optional settings for HP-GL/2 emulation on the printer control panel. 
 (See "Main Menu Set-
tings.") →P.730
This printer can emulate the following printers using HP-GL/2 emulation. Emulated Printers
Canon
W3000 and W3050(*3 →P.30
)
Hewlett-Packard Designjet 450c, Designjet 750c Plus, and Designjet 750c *1: HP-GL/2: Hewlett-Packard Graphics Language 2; HP RTL: Hewlett-Packard Raster Transfer Language
*2: It may not be possible to print jobs with excessively large amounts of data correctly.
*3: Layout templates are not supported.
Working With Various Print Jobs > Printing CAD Drawings >
HP-GL/2 Printing
iPF8252
30
 
						

							Printing Photos and Images
Printing Photos and Images .............................................................................................................................. 31
Printing Photos and Images (Windows) ........................................................................................................ 32
Printing Photos and Images (Mac OS X) ...................................................................................................... 34Printing Photos and Images
Printing is easy when you simply choose the print target. Easy Settings
Simply choose the printing application in the list for optimal printing results. Print Target
Choose presets that match the type of document to be printed. Print targets for photos and images
Print Target
Description Poster
The best setting for posters. Prints using vivid and high
impact colors. Photo (Color)
Suitable for printing photographic images captured with a
digital camera. Faithful Color Reproduc-
tion
Prints by minimizing color differences. Suitable for when
the printing results are too vivid or when printing scanned
images.Caution
• Depending on the Media Type  setting, some Print Target options may not be available.Note
• You can check the settings values for each print target by clicking  View Settings.
• You can also fine-tune these values as needed. (  Advanced Settings )
For 
details  on  Advanced  Settings,  see  "Giving  Priority  to  Particular  Graphic  Elements  and  Colors  for
Printing →P.56
" Working With Various Print Jobs 
> Printing Photos and Images >
iPF825
Printing Photos and Images 2
31
 
						

							Print Quality
Choose the print quality.
The printing mode is determined by a combination of the print quality and resolution. Print Quality
Description
Highest A setting for printing at the highest resolution when quality is most important.
Printing takes longer and consumes more ink than in other modes, but this mode
offers superior printing quality.
High Choose this setting to print at high resolution when quality is most important.
Printing takes longer and consumes more ink than in  Standard or Draft modes,
but this mode offers exceptional printing quality.
Standard Choose this setting to print at standard resolution when quality and speed are both
important.
Printing takes less time than in  Highest or High mode.
Draft Choose this setting to print faster.
Printing in draft mode can help you work more efficiently when checking layouts.For instructions on printing photos and images, refer to the following topics, as appropriate for your computer and operating
system.
•Printing Photos and Images (Windows) →P.32
• Printing Photos and Images (Mac OS X) →P.34
Printing Photos and Images (Windows)
This topic describes how to print photos based on the following example. •Document: Photo image from a digital camera
• Page size: 10×12 inches (254.0×304.8 mm)
• Paper: Roll
• Paper type: Premium 
Glossy Paper 200
• Roll paper width: 10 inches (254.0 mm)
1. Choose Print  in the application menu.
2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.216
")
Working With Various Print Jobs 
> Printing Photos and Images >
Printing Photos and Images (Windows)
iPF8252
32
 
						

							3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Premium Glossy Paper 200.
In  the AMedia  Type,  choose  the  type  of  paper  used  for  printing,  such  as  Glossy  Paper,  Coated  Paper,  and  so  on.
Make sure the paper you select is loaded in the printer. Note
• The 
paper  type  setting  in  the  printer  driver  and  related  software  (as  well  as  on  the  Control  Panel  )  is
updated  when  you  install  the  Media  Configuration  Tool  from  the  User  Software  CD-ROM  or  if  you
change paper information by using the Media Configuration Tool. For details, see  Media Configura-
tion Tool →P.412
.
5. After confirming that  DEasy Settings is selected, click  Photo (Color) in the EPrint Target list. Note
• You can check the settings values selected in the  EPrint Target  list by clicking  GView Settings.
Working With Various Print Jobs 
> Printing Photos and Images >
iPF825
Printing Photos and Images (Windows) 2
33
 
						

							6.
Click the  Page Setup tab to display the  Page Setup sheet.7.
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  10"x12".
8. Select and click a roll paper in the  LPaper Source list.
9. Select the width of the loaded roll in the  MRoll Paper Width list—in this case,  10-in. Roll (254.0mm).
10. Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings (Windows) →P.207
"
11. Confirm the print settings and print as desired. Note
• For instructions on confirming print settings, see " Confirming Print Settings (Windows) →P.211
" Printing Photos and Images (Mac OS X)
This topic describes how to print photos based on the following example. •Document: Photo image from a digital camera
• Page size: 10×12 inches (254.0×304.8 mm)
• Paper: Roll paper
• Paper type: Premium 
Glossy Paper 200
• Roll paper width: 10 inches (254.0 mm)
  Working With Various Print Jobs 
> Printing Photos and Images > Printing Photos and Images (Mac OS X)
iPF8252
34