Warning•Never disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a fire or elec-trical shock.•Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire or electrical shock, if it contactshigh voltage points inside the printer.•After removing the Cutter Unit, never touch the cutting edge (a). This could cause personal injury.Caution•Never place anything on the printer such as small metal objects (paper clips, staples), liquids, any type of liquid container thatcontains flammable liquids (alcohol, benzene, etc.). If such objects fall into the printer, this could cause a fire or electricalshock.•Never insert your hand into the printer while it is printing. Moving parts inside the printer can cause injuries.•To prevent a fire hazard or dangerous electric shock, if a foreign object falls into or a liquid spills into the printer, press thePower button immediately to switch the printer off, unplug the printer power cable from the outlet, and then call for service. Ifyou continue to use the printer, this could cause a fire or electrical shock.Important•Connect the interface cable correctly. To avoid damage, before connection make sure that the shape of the cable connectormatches the connection point on the printer.•During printing, turn on the ventilation system in the room.•We recommend ensuring ample space for installation.
FCC Regulations (U.S.A)
Canon Large Format PrinteriPF6400
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This de-
vice may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen- tial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that in- terference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Legal Notices iPF6400 User's Guide