Canon Pixma Mx922 User Guide

							If you load the original in the ADF, do not move the original until copying is complete.
Note
To cancel copying, press the Stop button.
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the  Color button or the  Black
button) as the one which you previously pressed.
Important
When you load the original on the platen glass, move the document cover gently.
Note
When  Print qlty  (print quality) is set  High, or you load the original in the ADF, you cannot add
the copying job.
When you add the copying job, the number of copies or the settings such as the page size or
media type cannot be changed.
If you press the  Stop button while reserve copying is in progress, the screen to select the
method to cancel copying is displayed. If you select  Cancel all reservations then press the OK
button, you can cancel copying all scanned data. If you select  Cancel the last reservation, then
press the  OK button, you can cancel the last copying job.
If you set a document of too many pages to add the copying job,  Cannot add more copy jobs.
Please wait a while and redo the operation.  may appear on the LCD. Press the OK button and
wait a while, then try copying again.
If  Failed to reserve the copy job. Start over from the beginning.  appears on the LCD when
scanning, press the  OK button, then press the  Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
 
						

							Displaying the Preview ScreenWhen you load the original on the platen glass and select  Standard copy or Frame erase copy  in
Advanced print , pressing a Function button allows you to preview an image of the printout on the
preview screen.
When  Standard copy  is selected, press the left  Function button on the Copy standby screen.
When  Frame erase copy  is selected, press the right  Function button on the print settings screen.
Important
The preview screen is not available when you load the original in the ADF.
In the following conditions, you cannot use the left  Function button when the Copy standby
screen is displayed.
2-sided  is selected for  2-sidedPrintSetting .
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
ON is selected for  Collate.
When  2-sided , 2-on-1 copy , or 4-on-1 copy  is selected and the original is loaded on the platen
glass, you can set to display the preview screen after scanning the original is finished.
Two-Sided Copying
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Collated Copying
The original will be scanned to display the preview image. Therefore, do not open the document
cover until the preview screen is displayed.
Originals are rescanned after displaying the preview screen and before copying starts.
Therefore, do not open the document cover or remove the original from the platen glass while Scanning document...  is displayed.
1.
Preview of the original
The original that is set on the platen glass is displayed. If the displayed image is skewed, refer to Loading Originals and reset the original properly, then display the preview screen again and
preview the original.
2.
Page size
A frame showing the selected page size appears over the image. The inside of the frame will be printed.
3.
Magnification
The magnification setting, which was set when the preview screen was displayed, is displayed. If the setting other than  Fit to page is selected, you can change the magnification setting using the
 button.
 
						

							Setting ItemsYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Standard copy :
The following screen is displayed by pressing the right  Function button on the Copy standby
screen.
•
In  Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items
You can specify the following setting items.
Use the 
 button to change the setting item and use the  button to change the setting.
 
						

							Note
Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in  Standard copy.
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for  Photo copy, see Copying Photos .
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected,  Error details is
displayed on the LCD. In this case, press the left  Function button to confirm the message, then
change the setting.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
When copying starts in the copy menu that is not available with the specified setting,  The
specified function is not available with current settings.  is displayed on the LCD. Change the
setting, following the on-screen instructions.
1.
Magnif.  (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2.
Intensity
Specify the intensity. When  Auto is selected, the intensity is adjusted automatically according to
the originals loaded on the platen glass.  Auto is displayed on the Copy standby screen.
Note
When  Auto is selected, load the original on the platen glass.
 
						

							3.Page size
Select the page size of the loaded paper.
4.
Type (Media type)
Select the media type of the loaded paper.
5.
Print qlty  (Print quality)
Adjust print quality according to the original.
Important
If you use  Fast with  Type set to  Plain paper  and the quality is not as good as expected,
select  Standard  or High  for Print qlty  and try copying again.
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of
grays instead of black or white.
6.
Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7.
ADF duplex scan
Select whether to perform duplex scanning from the ADF.
Two-Sided Copying
8.
2-sidedPrintSetting
Select whether to perform two-sided copying.
Two-Sided Copying
9.
Collate
Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.
Collated Copying
 
						

							Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen.
Select the reduction/enlargement method from  Magnif..
Note
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page
Note
When  Fit to page  is selected, load the original on the platen glass.
When you select  Fit to page, the page size may not be detected correctly depending on
the original. In this case, select the setting other than  Fit to page.
•
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.The setting in  Magnif.: 70% A4->A5 /86% A4->B5 /94% A4->LTR /115% B5->A4 /141% A5-
>A4 /156% 5x7->LTR /183% 4x6->LTR
Note
Some of the preset ratios are not available depending on the country or region of purchase.
•
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies.
 
						

							If you select other than Fit to page and press the right  Function button, Magnification  screen is
displayed. Use the 
 button to specify the magnification.
Note
400% MAX  (maximum copy ratio) and  25% MIN (minimum copy ratio) are selectable.
If you make a copy at the same size as the original, select  Same size.
 
						

							Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Standard copy , you can copy two original
pages onto the both sides of a single sheet of paper.
In addition, when you select  Duplex for ADF duplex scan , you can perform duplex scanning.
Specify the place to load originals or copy settings according to the two-sided copying method.
•
Single-sided to Two-sided
Place to load the original: platen glass or ADF ADF duplex scan : Simplex
2-sidedPrintSetting : 2-sided
Note
When you select  2-sided for 2-sidedPrintSetting , Advanced  is displayed on the LCD.
You can select the orientation and the stapling side of the paper by pressing the right Function  button. Also, you can select whether to display the preview screen when you load
the original on the platen glass.
•
When you select  Portrait for Orientation  and Long-side stapling  for Stapling side of
print paper :
•
When you select  Portrait for Orientation  and Short-side stapling  for Stapling side of
print paper :
•
When you select  Landscp. for Orientation  and Long-side stapling  for Stapling side of
print paper :
•
When you select  Landscp. for Orientation  and Short-side stapling  for Stapling side of
print paper :
 
						

							•
Two-sided to Single-sided
Place to load the original: ADF
ADF duplex scan : Duplex
2-sidedPrintSetting : 1-sided
Note
When you select  Duplex for ADF duplex scan , Advanced  is displayed on the LCD. You
can select the orientation and the stapling side of the original by pressing the right  Function
button.
•
When you select  Portrait for Orientation  and Long-side stapling  for Stapling side of
print paper :
•
When you select  Portrait for Orientation  and Short-side stapling  for Stapling side of
print paper :
•
When you select  Landscp. for Orientation  and Long-side stapling  for Stapling side of
print paper :
•
When you select  Landscp. for Orientation  and Short-side stapling  for Stapling side of
print paper :
•
Two-sided to Two-sided
Place to load the original: ADF
ADF duplex scan : Duplex
2-sidedPrintSetting : 2-sided
Note
When you select  Duplex for ADF duplex scan  and press the right  Function button, you
can select the orientation and the stapling side of the original. When you select  2-sided for
2-sidedPrintSetting  and press the right Function button, you can select the orientation and
the stapling side of the paper.
Select the same stapling side for the original and the paper.
•
When you select  Portrait for the orientation and  Long-side stapling for the stapling side:
 
						

							•
When you select Portrait for the orientation and  Short-side stapling for the stapling side:
•
When you select Landscp. for the orientation and  Long-side stapling for the stapling side:
•
When you select Landscp. for the orientation and  Short-side stapling for the stapling side:
After selecting the stapling side and press the  OK button, you can select whether you use the preview
screen. If you select  ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process.  appears on the LCD when scanning, set
the print quality to  Standard, then try copying again. If the problem is not resolved, set the print
quality to  Fast and try copying again.
Two-sided copy setting can be used in combination with  2-on-1 copy or 4-on-1 copy  when
Standard copy  is selected. In addition, two-sided copy is also available when  ON is selected for
Collate .
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Collated Copying
If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a
single-sided copy.
When Loading the Original on the platen glass:
•
Before scanning: When you select  2-sided for 2-sidedPrintSetting  and the preview function is activated, the
machine starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD.
1.
Rotate
If you press the right  Function button, the original rotates by 180 degrees.