Canon printer FAXPHONE L170 User Manual

							The Menu System
15
Menu Descriptions15-12
6.POLLING BOX Sets the functions of SETUP FILE, CHANGE 
DATA and DELETE FILE.
1.SETUP FILE Registers a polling box.
1.FILE NAME Enters a name for poling box (max. 24 
characters, including spaces).
2.PASSWORD Enters a password to protect the polling box 
settings (max. 7 characters).
3.ERASE AFTER TX Tells the machine how to handle a document 
after it is polled and sent.
ON, OFF
2.CHANGE DATA Changes the settings of the polling box.
1.FILE NAME Changes the file name.
2.PASSWORD Changes the password.
3.ERASE AFTER TX Changes the ERASE AFTER TX setting.
3.DELETE FILE Deletes the polling box and all of its settings.
7.SYSTEM SETTINGS Sets the functions of MEMORY LOCK RX and 
FAX DEFAULT.
1.MEMORY LOCK RX Set the Memory Lock functions.
OFFPrints a document as soon as the machine 
receives it.
ON Receives and stores all documents in memory. 
They will not be printed out unless the Memory 
Lock password is entered.
1.MEM LOCK PASSWORD 0 to 9999999
This password protects the Memory Lock 
settings. Setting a password is recommended. 
You must use this password to unlock the 
memory so you can print documents stored in 
memory. Use the numeric buttons to enter a 
password (up to seven digits).
2.REPORT Sets the machine to print reports. This setting 
affects only reports that print automatically, 
such as an Activity Report.
OUTPUT NONo report prints while in the Memory Lock 
mode.
OUTPUT YES A report prints while the machine is in the 
Memory Lock mode.
(The factory default setting is in bold face. )
NameDescriptions 
						

							The Menu System
15
Menu Descriptions15-13
5. ADD. REGISTRATION
2.FAX DEFAULT Sets the FAX DEFAULT functions.
1.RESOLUTION Sets the fax resolution.
OFFThe setting of resolution set using [Image 
Quality] remains even after the AUTO CLEAR 
function activates.
STANDARD Suitable for most text-only documents.
FINE Suitable for fine-print documents.
PHOTO Suitable for documents that contain 
photographs.
SUPER FINE Suitable for documents that contain fine print 
and images. (The resolution is four times that of 
STANDARD)
ULTRA FINE Suitable for documents that contain fine print 
and images. (The resolution is eight times that 
of STANDARD)
2.SCAN DENSITY Sets the machine’s standard scanning density.
OFF, LIGHT, STANDARD, DARK
(The factory default setting is in bold fac e.)
NameDescriptions
1.1-TOUCH SPD DIAL Registers the information on One-Touch Speed 
Dialing. 
Up to 32 destinations can be registered.
1-TOUCH SPD DIAL Selects a One-Touch Speed Dial button.
1.TEL NUMBER ENTRY Registers the other party’s telephone number 
(max. 120 digits, including spaces).
2.NAME Registers the other party’s name (max. 16 
characters, including spaces).
2.CODED SPD DIAL Registers the information on Coded Speed 
Dialing.
Up to 100 destinations can be registered.
CODED SPD DIAL Selects a Coded Speed Dialing code.
1.TEL NUMBER ENTRY Registers the other party’s telephone number 
(max. 120 digits, including spaces).
2.NAME Registers the other party’s name (max. 16 
characters, including spaces).
(The factory default setting is in bold fac e.)
NameDescriptions 
						

							The Menu System
15
Menu Descriptions15-14
6. PRINTER SETTINGS
3.GROUP DIAL Registers the information on Group Dialing. 
Up to 131 groups can be registered.
1.TEL NUMBER ENTRY Registers the other party’s telephone numbers 
by specifying the One-Touch Speed Dial 
buttons or Coded Speed Dialing codes.
2.NAME
Registers the group’s name (max. 16 characters, 
including spaces).
(The factory default setting is in bold face. )
NameDescriptions
1.PRESET PRINT QTY Sets the standard number of pages of the 
printer function. 01 to 99 (01)
2.AUTO ERROR SKIP Sets either printing with skipping an error 
automatically, or without skipping an error.
ONThe auto error skip is on. The error is skipped 
and shifted to the next job automatically without 
indicating an error code.
OFF The auto error skip is off. Skip the error and 
shift to the next job manually.
3.ERROR TIME OUT Sets the length of time before the machine 
returns an error when no data is received from 
the computer.
ONThe error time out is on. Sets time out period 
005SEC to 300SEC. (015SEC)
OFF The error time out is off.
4.PRINTER RESET Cancels the job currently being received and 
the job already received.
(The factory default setting is in bold face. )
NameDescriptions 
						

							The Menu System
15
Menu Descriptions15-15
7. TIMER SETTINGS
NameDescriptions
1.DATE/TIME SETTING Enter the current date and time.
2.AUTO CLEAR Sets the auto clear function. If the machine 
remains idle for a certain period of time, the 
display returns to the standby mode.
ONThe auto clear function is turned on. 
1MIN. to 9MIN. (2MIN.)
OFF The auto clear function is turned off.
3.ENERGY SAVER Sets the energy saver mode.
ONThe energy saver mode is set.
03MIN. to 30MIN. (05MIN.)
OFF The energy saver mode is turned off.
4.DATE SETUP Set the format for the DATE & TIME settings 
menu and how the date is displayed in the LCD. 
MM/DD/YYYY, DD/MMYYYY, YYYY MM/DD
5.DAYLGHT SAV TIME Sets the daylight saving time.
OFFThe daylight saving time setting is disabled.
ON The daylight saving time setting is enabled.
1.START DATE/TIME Sets the MONTH, WEEK, DAY and TIME when 
the daylight saving time starts.
2.END DATE/TIME Sets the MONTH, WEEK, DAY and TIME when 
the daylight saving time ends.
(The factory default setting is in bold fac e.) 
						

							The Menu System
15
Menu Descriptions15-16
8. PRINT LISTS
NameDescriptions
1.USER DATA Prints out a list of items set or registered in the 
Menu.
2.SPEED DIAL LIST Prints the list of the fax/telephone numbers 
registered for One-Touch Speed Dial buttons, 
Coded Speed Dialing codes or group dialing.
1.1-TOUCH LIST Prints the One-touch List.
1.NO SORT The printout of the list is not sorted.
2.SORT The printout of the list is sorted.
2.CODED DIAL LIST Prints the Coded Dial List.
1.NO SORT The printout of the list is not sorted.
2.SORT The printout of the list is sorted.
3.GROUP DIAL LIST Prints the Group Dial List.
3.CANCEL  REPORT Cancels printout of the report. Select report you 
want to cancel the printout.
REPORT STATUS Displays the report status and allows you to 
select the report job to be canceled. Select a 
job ➞ press [Set].
CANCEL REPORT? YES The printout of the list is canceled.
CANCEL REPORT? NO The printout of the list is not canceled.
(The factory default setting is in bold face. ) 
						

							APPENDIX
GeneralA-1
ASpecifications
The specifications for the machine are listed in this section.
General
Applicable line: Public Switched Telephone Network
Compatibility: G3
Data compression system: MH, MR, MMR, JBIG
Modem type: FAX modem
Modem speed:33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 
9600, 7200, 4800, 2400 bps (automatic fallback)
Transmission speed:Approx. 3 seconds/page* 
(transmitting from memory)
Transmission/reception memoryApprox. 7.2 MB, DRAM, JBIG storage
Approx. 450 pages**
LCD displays memory used
Uses direct transmission when memory is full
Liquid crystal display: 20 
× 2
Display languages: ENGLISH, FRENCH, SPANISH, PORTUGUESE
Power source:120 V, 60 Hz [Power source differs depending on the country in which you 
purchased the product.]
Power consumption:Maximum: Approx. 600W
Minimum: Approx. 9 W 
Energy Saver Mode: 5 W
Dimensions
(W 
× D × H):17 1/4” × 18 3/16” × 13 25/64” (438 × 462 × 340 mm)
(main machine only, no trays, no handset)
Weight: 24.7 lb (11.2 kg)
Environmental requirements:Temperature: 50°F to 90.5°F (10°C–32.5°C)
Humidity: 20–80% RH
Applicable standards:Electrical safety: UL1950, C-UL
Radiation: FCC Part 15 Class B, IC Class B
PTT: FCC part 68, IC CS-03, Energy Star Compliant
PC Interface: USB 1.1
* Based on Canon FAX Standard Chart No.1, JBIG, standard mode
** Based on Canon FAX Standard Chart No.1, standard mode 
						

							Specifications
A
FaxA-2
Fax
* Based on 20 lb (75 g/m2) paper
** Based on Canon FAX Standard Chart No.1, LTR, standard modeAutomatic document feeder capacity:*50 A4- or letter-size sheets
20 legal-size sheets
1 sheet for sizes other than A4-, letter-, or legal-size sheets.
Document size:Multi-page document: Max.: 8 1/2” 
× 14” (216 × 356 mm)/ Min.: 5 53/64” × 4 
9/64” (148 × 105 mm) 
One-page document: Max.: 8 1/2” × approx.39 3/8” 
(216 mm × approx. 1 m)/ Min.: 5 53/64” × 4 9/64” (148 × 105 mm)
Document thicknessMulti-page document: 0.003”-0.005” (0.07 – 0.13 mm)
One-page document: 0.002”-0.009” (0.06 – 0.23 mm)
Document weight:Multi-page document: 13 lb to 28 lb (50 – 105 g/m
2)
One-page document: 13 lb to 64 lb (50 – 240 g/m2)
Transmission time: Approx. 3 seconds** (G3 JBIG)
Resolution:Standard mode: 203 pixels/in. 
× 98 lines/in. (8 pixels/mm × 3.85 lines/mm)
Fine mode: 203 pixels/in. × 196 lines/in. (8 pixels/mm × 7.7 lines/mm)
Photo mode: 203 pixels/in. × 196 lines/in. (8 pixels/mm × 7.7 lines/mm)
Super fine mode: 203 pixels/in. × 391 lines/in. (8 pixels/mm × 15.4 lines/mm)
Ultra fine mode: 406 pixels/in. × 391 lines/in. (16 pixels/mm × 15.4 lines/mm)
Scanning image processing:Ultra-High-Quality Image 
Processing System (UHQ™)
Halftones: 256 levels of gray
9 density adjustment levels
Recording method: Laser Beam printing
Fax printing speed: Approx. 19 pages/minute**
Dialing:Automatic dialing:
– One-Touch Speed Dialing (32 locations) 
– Coded Speed Dialing (100 locations)
– Group Dialing (131 locations)
Regular 10-button dialing 
(with numeric buttons)
Automatic redialing
Manual redialing
Pause button
Networking:Delayed transmission (up to 142 locations at a single pre-set time)
Sequential broadcast (up to 142 locations)
Automatic receiving
Non-ring reception
Deactivate ECM
DRPD (Distinctive Ring Pattern Detection)
Report/reference:Activity report (up to 20 transactions)
Non-delivery report
TTI (Transmit Terminal Identification)
Toner saver:Economy mode for printing received faxes decreases toner consumption by 
approx. 30% 
						

							Specifications
A
CopierA-3
Copier
Telephone
•Automatic FAX/TEL switchover
•Answering machine connection
(CNG detecting signal)
•Telephone connection•Handset connection
•Remote reception by telephone 
(Default reception ID: 25)
•Tone button•Redial/Pause button
Scan resolution: 300 × 300 dpi 
Default size: 100%
Zoom: 50-200%
Multiple copies: Up to 99 copies of a document 
						

							Specifications
A
PrinterA-4
Printer
* FAXPHONE L170 is equipped with a printer engine of 600 dpi resolution. By adopting Canons own Image Refinement, an 1200 dpi 
enhanced × 600 dpi image can be obtained.
** S35 S-Cartridge is a starter cartridge supplied with the machine.Printing method: Laser beam printing
Printing resolution:  1200 dpi enhanced 
× 600 dpi*
Paper handling: Automatic feed
Acceptable recording paper stockCassette Feeding: 17 lb to 34 lb (64 g/m
2 to 128 g/m2) ; Multi-Purpose 
Feeder: 17 lb to 34 lb (64 g/m2 to 128 g/m2)
Plain paper, colored paper, recycled paper (including 100% recycled 
paper), transparencies, envelopes, labels, and heavy paper 
(up to 34 lb (128 g/m
2))
Envelope sizes:European DL envelope (8 43/64” 
× 4 21/64” (220 × 110 mm))
U.S. Commercial No. 10 envelope (9 1/2” × 4 3/32” (241 × 104 mm)) 
Envelope Monarch (7 33/64” × 3 55/64” (191 × 98 mm))
Envelope ISO-C5 (9 1/64” × 6 3/8” (229 × 162 mm))
Printing width: Maximum 8 7/64” (212 mm (LTR))
Paper Feeding SystemCassette Feeding: 250 sheets of 17 lb (64 g/m
2)
Multi-Purpose Feeder: 1 sheet
Printing CartridgeS35 S-Cartridge** (Yield: Approx. 2,500 pages)
S35 Cartridge (Yield: Approx. 3,500 pages) 
						

							Specifications
A
PrinterA-5
Printable Area: Papers
The shaded area in the following figure shows the printable area for papers.
■Printable area:
Letter size Legal size A4 size
a:
b:
c:
d:
e:
f:8.5”
Max. 0.2”
Max. 0.2”
11.0”
Max. 0.2”
Max. 0.2”8.5”
Max. 0.2”
Max. 0.2”
14.0”
Max. 0.2”
Max. 0.2”210mm
max. 5.0mm
max. 5.0mm
297mm
max. 5.0mm
max. 5.0mm