DELL 3330dn User Manual

2Use the following illustration to locate the appropriate connector.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or connectors.
1Ethernet connector
Note: The Ethernet port is a feature on network models only.
2USB port
3Parallel connector
4Memory card connector
5Optional card connector
6Optional card connector
Installing a memory card
CAUTION—SHOCK HAZARD:...

An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1Access the system board.
2Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3Align the memory card with its connector on the system board. Push the latches on the connector open if they
are not open already.
Additional printer setup
22
 

4Push the memory card into the connector until the latches snap into place.
5Close the system board door.
Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card. Only one of each may be
installed, but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord...

2Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
3Holding the card by its sides, align the card with the connector on the system board.
4Push the card firmly into place.
Notes:
The entire length of the connector on the card must touch and be flush against the system board.
Be careful not to damage the connectors.
5Close the system board door.
Additional printer setup
24
 

Installing hardware options
Installing an optional drawer
The printer supports an optional drawer. Only one drawer may be installed on the printer at one time.
CAUTION—SHOCK HAZARD: If you are installing an optional drawer after setting up the printer, then turn the
printer off and unplug the power cord from the wall outlet before continuing
1Unpack the drawer, and then remove any packing material from the outside of the drawer.
2Remove the tray from the support unit.
3Remove any packing material and...

6Align the printer with the drawer, and then lower the printer into place.
Attaching cables
1Connect the printer to a computer or a network.
For a local connection, use a USB or parallel cable.
For a network connection, use an Ethernet cable.
2Connect the power cord to the printer first and then to a wall outlet.
Additional printer setup
26
 

1Ethernet port
2USB port
3Parallel port
4Power cord socket
Installing the printer on a wired network
Use the following instructions to install the printer on a wired network. These instructions apply to Ethernet and fiber
optic network connections.
Before you install the printer on a wired network, make sure that:
You have completed the initial setup of the printer.
The printer is connected to your network with the appropriate type of cable.
For Windows users
1Insert the Software and Documentation CD....

6Select the printer manufacturer from the list.
7Select the printer model from the list, and then click Next.
8Select the printer from the list of printers discovered on the network, and then click Finish.
Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the
on-screen instructions.
9Follow the on-screen instructions to complete the installation.
For Macintosh users
1Allow the network DHCP server to assign an IP address to the printer.
2Print...

5Click IP.
6Type in the IP address of your printer in the Address field.
7Click Add.
For AppleTalk printing:
In Mac OS X version 10.5
1From the Apple menu, choose System Preferences.
2Click Print & Fax.
3Click +.
4Click AppleTalk.
5Select the printer from the list.
6Click Add.
In Mac OS X version 10.4 and earlier
1From the Finder desktop, choose Go > Applications.
2Double-click Utilities.
3Double-click Print Center or Printer Setup Utility.
4From the Printer List, click Add.
5Choose the Default Browser...

3From the Finder desktop, double-click the printer CD icon that automatically appears.
4Double-click the Install icon.
5Follow the instructions on the screen.
Using the World Wide Web
Updated printer software may be available at  www.support.dell.com.
Verifying printer setup
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up
correctly by printing the following: .
Menu settings page—Use this page to verify that all printer options are...