DELL 3330dn User Manual

235 paper jam
A duplex print job was sent to the printer using a size of paper not supported for duplex printing. A sheet is jammed
in the standard exit bin.
1To remove the jam, gently pull the jammed sheet out of the standard exit bin.
2Press .
242 paper jam
1Remove the optional tray from the printer.
Clearing jams
71
 

2Remove the jam.
3Insert the optional tray.
4Press .
251 paper jam
A sheet of paper or specialty media failed to feed completely from the multipurpose feeder. Part of it may be still
visible. If it is visible, gently pull the jammed sheet from the front of the multipurpose feeder.
Clearing jams
72
 

If the sheet is not visible, complete the following steps:
1Open the front door, and then remove the unit.
2Lift the flap at the front of the printer, and then remove any jammed sheets of paper that are short lengths of
paper.
3Align and insert the unit.
4Close the front door.
5Press .
Clearing jams
73
 

Understanding printer menus
Menus list
A number of menus and menu items are available to make it easy for you to change printer settings:
Paper Menu Reports Network/Ports
Default Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Universal SetupMenu Settings Page
Device Statistics
Network Setup Page
Profiles List
Netware Setup Page
Print Fonts
Print Directory
Asset ReportActive NIC
Network Menu
USB Menu
Parallel Menu
SMTP Menu
Security Settings...

Paper menu
Default Source menu
Menu itemDescription
Default Source
Tray 
MP Feeder
Manual Paper
Manual EnvSets a default paper source for all print jobs
Notes:
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Tray 1 (standard tray) is the factory default setting.
Only an installed paper source will appear as a menu setting.
A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
If the...

Menu itemDescription
Tray  Type
Plain Paper
Card Stock
Transparency
Recycled
Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Custom Type Specifies the type of paper loaded in each tray
Notes:
Plain Paper is the factory default setting for Tray 1. Custom Type  is
the factory default setting for all other trays.
If available, a user-defined name will appear instead of Custom Type .
Use this menu item to configure automatic tray linking.
Manual Paper Size
A4
A5
A6...

Menu itemDescription
MP Feeder Size
A4
A5
A6
Executive
Folio
JIS B5
Legal
Letter
Oficio (Mexico)
Statement
Universal
7 3/4 Envelope
9 Envelope
10 Envelope
C5 Envelope
B5 Envelope
DL Envelope
Other EnvelopeSpecifies the paper size loaded in the multipurpose feeder
Notes:
Letter is the U.S. factory default setting. A4 is the international factory
default setting.
The menu item applies only when the multipurpose feeder (MP Feeder)
is configured for Cassette. From the Paper menu, Configure MP must be
set to...

Menu itemDescription
Manual Paper Type
Plain Paper
Card Stock
Transparency
Recycled
Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Custom Type Specifies the type of paper being manually loaded in the multipurpose feeder
Notes:
Plain Paper is the factory default setting.
From the Paper menu, Configure MP must be set to Manual in order for
Manual Paper to appear as a menu item.
Manual Env Size
7 3/4 Envelope
9 Envelope
10 Envelope
C5 Envelope
B5 Envelope
DL Envelope...

Substitute Size menu
Menu itemDescription
Substitute Size
Off
Statement/A5
Letter/A4
All ListedSubstitutes a specified paper size if the requested paper size is not available
Notes:
All Listed is the factory default setting. All available substitutions are
allowed.
The Off setting indicates no size substitutions are allowed.
Setting a substitution lets the job print without a Change Paper message
appearing.
Paper Texture menu
Menu itemDescription
Plain Texture
Smooth
Normal
RoughSpecifies the relative...

Menu itemDescription
Rough Envelope Texture
RoughSpecifies the relative texture of the envelopes loaded in a specific tray
Note: Rough is the factory default setting.
Letterhead Texture
Smooth
Normal
RoughSpecifies the relative texture of the letterhead paper loaded in a specific tray
Note: Normal is the factory default setting.
Preprinted Texture
Smooth
Normal
RoughSpecifies the relative texture of the preprinted paper loaded in a specific tray
Note: Normal is the factory default setting.
Colored...