DELL 3330dn User Manual

Menu itemDescription
Transparency Weight
Light
Normal
HeavySpecifies the relative weight of the transparencies loaded in a specific tray
Note: Normal is the factory default setting.
Recycled Weight
Light
Normal
HeavySpecifies the relative weight of the recycled paper loaded in a specific tray
Note: Normal is the factory default setting.
Labels Weight
Light
Normal
HeavySpecifies the relative weight of the labels loaded in a specific tray
Note: Normal is the factory default setting.
Bond Weight
Light...

Menu itemDescription
Rough/Cotton Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Custom  Weight
Light
Normal
HeavySpecifies the relative weight of the custom paper type loaded in a specific tray
Notes:
Normal is the factory default setting.
Settings appear only if the custom type is supported.
Paper Loading menu
Menu itemDescription
Recycled Loading
Duplex
OffDetermines whether 2-sided printing occurs for all jobs...

Menu itemDescription
Custom  Loading
Duplex
OffDetermines whether 2-sided printing occurs for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default setting.
Custom  Loading is available only if the custom type is
supported.
Notes:
Duplex sets the printer default to 2-sided printing for every print job unless 1-sided printing is selected from Print
Properties.
If Duplex is selected, all print jobs are sent through the duplex unit, including 1-sided jobs.
Custom Types menu
Menu...

Menu itemDescription
Portrait Width
3–14.17 inches
76–360 mmSets the portrait width
Notes:
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Portrait Height
3–14.17 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the...

Menu itemDescription
Network  Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item is available when more than one network option is installed.
This menu item appears only for network printers or printers connected to
print servers.
Profiles ListPrints a list of profiles stored in the printer
NetWare Setup PagePrints a report containing NetWare-specific information about the network
settings
Note: This menu item...

Standard Network or Network  menus
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch...

Menu itemDescription
Std Network Setup
Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
Net  Setup
Reports
Network Card
TCP/IP
IPv6
Apple Talk
NetWareFor descriptions and settings of the network setup menus, see the following:
“Reports menu (under the Network/Ports menu)” on page 87
“Network Card menu” on page 87
“TCP/IP menu” on page 88
“IPv6 menu” on page 89
“AppleTalk menu” on page 89
“NetWare menu” on page 90
Reports menu (under the Network/Ports menu)
The Reports menu item is available from the...

Menu itemDescription
Job Timeout
0-225 secondsSets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, the setting is saved as 10.
Banner Page
On
OffAllows the printer to print a banner page
Note: Off is the factory default setting.
TCP/IP menu
Note: This menu is available only for network models or printers attached to print servers.
This menu is...

Menu itemDescription
Enable FTP/TFTP
Yes
NoEnables the built-in FTP server, which allows files to be transferred to the printer
Note: Yes is the factory default setting.
Enable HTTP Server
Yes
NoEnables the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
WINS Server AddressLets you view or change the current WINS Server Address
DNS Server AddressLets you view or change the current DNS...

Menu itemDescription
View AddressShows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Set Zone
Provides a list of AppleTalk zones available on the network
Note: The default setting is the default zone for the network. If no default zone
exists, the zone marked with an * is the default setting.
NetWare menu
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  Network Setup  NetWare
Menu itemDescription
Activate
Yes...