Dukane Projector 8121WIA User Manual
Here you can view all the pages of manual Dukane Projector 8121WIA User Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 151
151 PhenomenonCases not involving a machine defectReference page The sound or image is unstable or is output intermittently. When LAN, USB TYPE A or USB TYPE B port is selected, some ports of the output may be missing due to signal processing delay. Change the signal or use another port. 28, 61 The computer connected to the USB TYPE B port of the projector does not start up.The computer cannot start up in the current hardware configuration. Disconnect the USB cable from the computer, then...
Page 152
152 PhenomenonCases not involving a machine defectReference page When the projector is connected to wired LAN, it powers off and on as described below. Powers off POWER indicator blinks in orange a few times Goes into standby mode Disconnect the LAN cable and check that the projector is working properly. If this phenomenon occurs after connecting to the network, there may be a loop between two Ethernet switching hubs within the network, as explained below. - There are two or more Ethernet...
Page 153
![Page 153
153
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
When using
the interactive function PC
INTERACTIVE mode, the projector
can not be
recognized. Is the power of the projector turned on?
Check to ensure that the POWER indicator of the projector
is lit in green.
144
Is the USB cable connected correctly?
Connect the USB cable to the computer. 90
Has PC INTERACTIVE mode been activated?
Press the...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-152.png "Page 153
153
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
When using
the interactive function PC
INTERACTIVE mode, the projector
can not be
recognized. Is the power of the projector turned on?
Check to ensure that the POWER indicator of the projector
is lit in green.
144
Is the USB cable connected correctly?
Connect the USB cable to the computer. 90
Has PC INTERACTIVE mode been activated?
Press the...")
153 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page When using the interactive function PC INTERACTIVE mode, the projector can not be recognized. Is the power of the projector turned on? Check to ensure that the POWER indicator of the projector is lit in green. 144 Is the USB cable connected correctly? Connect the USB cable to the computer. 90 Has PC INTERACTIVE mode been activated? Press the...
Page 154
![Page 154
154
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The pen doesnot operate. Is transmission between the pen and the projector
obstructed?
Make sure that the area between the sensor at the top
surface of the projector and the screen is not obstructed
(transparent and meshed objects are also not allowed). For
example, the Interactive Function does not function if the
projector is enclosed...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-153.png "Page 154
154
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The pen doesnot operate. Is transmission between the pen and the projector
obstructed?
Make sure that the area between the sensor at the top
surface of the projector and the screen is not obstructed
(transparent and meshed objects are also not allowed). For
example, the Interactive Function does not function if the
projector is enclosed...")
154 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page The pen doesnot operate. Is transmission between the pen and the projector obstructed? Make sure that the area between the sensor at the top surface of the projector and the screen is not obstructed (transparent and meshed objects are also not allowed). For example, the Interactive Function does not function if the projector is enclosed...
Page 155
![Page 155
155
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The tip of the pen does not coincide with
the pen cursor. Has calibration been performed?
Press the CALIBRATION button or perform calibration from
the menu.
29, 92,
93
Is FINGER TOUCH item of IWB SETUP menu set to ON
?
Set to OFF except for using optional Finger Touch Unit (FT-
01B). –
Is the projector tilting?
The projector does not operate...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-154.png "Page 155
155
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The tip of the pen does not coincide with
the pen cursor. Has calibration been performed?
Press the CALIBRATION button or perform calibration from
the menu.
29, 92,
93
Is FINGER TOUCH item of IWB SETUP menu set to ON
?
Set to OFF except for using optional Finger Touch Unit (FT-
01B). –
Is the projector tilting?
The projector does not operate...")
155 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page The tip of the pen does not coincide with the pen cursor. Has calibration been performed? Press the CALIBRATION button or perform calibration from the menu. 29, 92, 93 Is FINGER TOUCH item of IWB SETUP menu set to ON ? Set to OFF except for using optional Finger Touch Unit (FT- 01B). – Is the projector tilting? The projector does not operate...
Page 156
![Page 156
156
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
Calibrationof the pen
position cannot be performed correctly. Is the projector correctly installed?
Check the installed position of the projector.
11 4
Is the computer image projected within the area of the
screen?
Install and use at a position where the screen size is
between 60"-100". Do not set the KEYSTONE and
PERFECT FIT functions to...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-155.png "Page 156
156
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
Calibrationof the pen
position cannot be performed correctly. Is the projector correctly installed?
Check the installed position of the projector.
11 4
Is the computer image projected within the area of the
screen?
Install and use at a position where the screen size is
between 60\"-100\". Do not set the KEYSTONE and
PERFECT FIT functions to...")
156 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page Calibrationof the pen position cannot be performed correctly. Is the projector correctly installed? Check the installed position of the projector. 11 4 Is the computer image projected within the area of the screen? Install and use at a position where the screen size is between 60"-100". Do not set the KEYSTONE and PERFECT FIT functions to...
Page 157
![Page 157
157
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The interactivepen or systemdoes not work properly or
intermittently works. There may be obstacles in between the interactive pen
and sensors (Camera) on the projector.
Remove all things between the pen and sensor (Camera).
109
The way of you hold the pen or your position may affect
the system.
Hold the pen as perpendicular to the interactive...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-156.png "Page 157
157
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The interactivepen or systemdoes not work properly or
intermittently works. There may be obstacles in between the interactive pen
and sensors (Camera) on the projector.
Remove all things between the pen and sensor (Camera).
109
The way of you hold the pen or your position may affect
the system.
Hold the pen as perpendicular to the interactive...")
157 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page The interactivepen or systemdoes not work properly or intermittently works. There may be obstacles in between the interactive pen and sensors (Camera) on the projector. Remove all things between the pen and sensor (Camera). 109 The way of you hold the pen or your position may affect the system. Hold the pen as perpendicular to the interactive...
Page 158
![Page 158
158
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The computer
does not boot. In BIOS setting, don't you use USB area for BOOT?
This product has USB memory area. While the projector
and the computer are connected using USB cable, if the
computer is powered on after the projector is powered on,
the computer uses USB memory area for BOOT so that the
computer might not starts up. As the...](http://img.usermanuals.tech/thumb/5762/100137/w300_projector_manual_8961_d-157.png "Page 158
158
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continue\
d)
PhenomenonCases not involving a machine defectReference
page
The computer
does not boot. In BIOS setting, don't you use USB area for BOOT?
This product has USB memory area. While the projector
and the computer are connected using USB cable, if the
computer is powered on after the projector is powered on,
the computer uses USB memory area for BOOT so that the
computer might not starts up. As the...")
158 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continue\ d) PhenomenonCases not involving a machine defectReference page The computer does not boot. In BIOS setting, don't you use USB area for BOOT? This product has USB memory area. While the projector and the computer are connected using USB cable, if the computer is powered on after the projector is powered on, the computer uses USB memory area for BOOT so that the computer might not starts up. As the...
Page 159
159 Specifications Specifications End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules. • Be sure to read “End User License Agreement for the Projector Software” which is separated document. (in the CD) Please see the Specifications in the User’s Manual (concise) which is a book. Trademark acknowledgment • Mac® and...