Epson Aculaser M 2000 Service Manual
Have a look at the manual Epson Aculaser M 2000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 217
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 217
Confidential2. Remove the Shoulder Screw [3] and the Screw [4].
3. Remove the Vertical Transport Assy [5] as shown in the figure above.
Since multiple Connectors [6] are connected to the backside of the Vertical Transport
Assy, do not pull it by force.
4. Remove two Connectors [6] of the backside of the Vertical Transport Assy.
[6]
[5]
[3] [4]
5. Remove two Claws [7] of both sides, and remove the Sensor...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-216.png "Page 217
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 217
Confidential2. Remove the Shoulder Screw [3] and the Screw [4].
3. Remove the Vertical Transport Assy [5] as shown in the figure above.
Since multiple Connectors [6] are connected to the backside of the Vertical Transport
Assy, do not pull it by force.
4. Remove two Connectors [6] of the backside of the Vertical Transport Assy.
[6]
[5]
[3] [4]
5. Remove two Claws [7] of both sides, and remove the Sensor...")
![Page 218
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 218
Confidential7. Repeat the steps from 5 to 6 and remove the IDC sensor/2 (rear side) [13].
[13]
4038F2C173DA
Feed Roller (MP tray)
The separation roller should be replaced, whenever the feed roller is replaced.
1. Snap of the E-ring [1], and remove paper feed clutch [2].
2. Remove the Gear [3].D3
[3] [1]
4038F2C004DA4038F2C005DA
[2]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-217.png "Page 218
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 218
Confidential7. Repeat the steps from 5 to 6 and remove the IDC sensor/2 (rear side) [13].
[13]
4038F2C173DA
Feed Roller (MP tray)
The separation roller should be replaced, whenever the feed roller is replaced.
1. Snap of the E-ring [1], and remove paper feed clutch [2].
2. Remove the Gear [3].D3
[3] [1]
4038F2C004DA4038F2C005DA
[2]")
![Page 219
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 219
Confidential3. Snap off the E-ring [4] and remove the Bearing [5].
4. Snap off two C-ring [6], and remove the Bearing [7].
4038F2C006DB
[4]
[5]
[9]
[8]
4038F2C007DB
[7][6]
5. Remove the Feed Roller [8].
When installing the Feed Roller with a new one, make sure to reset the life counter.
(Refer to Chapter 5 “ADJUSTMENT”) (p313))
4038F2C008DB
[8]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-218.png "Page 219
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 219
Confidential3. Snap off the E-ring [4] and remove the Bearing [5].
4. Snap off two C-ring [6], and remove the Bearing [7].
4038F2C006DB
[4]
[5]
[9]
[8]
4038F2C007DB
[7][6]
5. Remove the Feed Roller [8].
When installing the Feed Roller with a new one, make sure to reset the life counter.
(Refer to Chapter 5 “ADJUSTMENT”) (p313))
4038F2C008DB
[8]")
![Page 220
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 220
Confidential
Separation Roller (MP tray)
The pickup roller should be replaced, whenever the separation roller is replaced.
1. Remove the Screw [1], and remove the Ground terminal [2].
2. Remove the Screw [3], and remove the separation roller assy [4].
E3
[1]
4038F2C009DA4038F2C010DA
[3] [2]
[4]
3. Snap off the C-clip [5], and remove the spring [6] and the guide plate [7]. Remove the
Separation...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-219.png "Page 220
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 220
Confidential
Separation Roller (MP tray)
The pickup roller should be replaced, whenever the separation roller is replaced.
1. Remove the Screw [1], and remove the Ground terminal [2].
2. Remove the Screw [3], and remove the separation roller assy [4].
E3
[1]
4038F2C009DA4038F2C010DA
[3] [2]
[4]
3. Snap off the C-clip [5], and remove the spring [6] and the guide plate [7]. Remove the
Separation...")
![Page 223
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 223
Confidential
Right Rear Cover + Rear Cover
1. Open the Right Door [1].
2. Remove three Screws [2], and remove the Right Rear Cover [3].
3. Remove nine Screws [4], and remove the Rear Cover [5].
A1
B1
D1
C1
E1
[1]
[3] [2] [4][4] [4]
[5]
Standard cassette Paper Size Board
(PWB-I)
1. Slide out the Paper Cassette 1.
2. Remove two Screws [1], the Connector [2] and remove the Standard cassette Paper Size
Board...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-222.png "Page 223
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 223
Confidential
Right Rear Cover + Rear Cover
1. Open the Right Door [1].
2. Remove three Screws [2], and remove the Right Rear Cover [3].
3. Remove nine Screws [4], and remove the Rear Cover [5].
A1
B1
D1
C1
E1
[1]
[3] [2] [4][4] [4]
[5]
Standard cassette Paper Size Board
(PWB-I)
1. Slide out the Paper Cassette 1.
2. Remove two Screws [1], the Connector [2] and remove the Standard cassette Paper Size
Board...")
![Page 224
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 224
Confidential3. Remove the Lever [4].
4. Remove the Standard cassette Paper Size Board (PWB-I) [5].
Be cautious for working not to deform the Lever parts.
[4] [5]
4038F2C516DA
Fusing Drive Motor (M4)
1. Remove the Connector [1] and two Screws [2], and remove the Fusing Drive Motor (M4)
[3].
C2
[1][2] [3]
4039F2C518DA](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-223.png "Page 224
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 224
Confidential3. Remove the Lever [4].
4. Remove the Standard cassette Paper Size Board (PWB-I) [5].
Be cautious for working not to deform the Lever parts.
[4] [5]
4038F2C516DA
Fusing Drive Motor (M4)
1. Remove the Connector [1] and two Screws [2], and remove the Fusing Drive Motor (M4)
[3].
C2
[1][2] [3]
4039F2C518DA")
![Page 225
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 225
Confidential
Toner Supply Motor C/K (M7)
1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor C/K
[3].
D2
[1] [3]
[2]
Toner Supply Motor Y/M (M6)
1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor Y/M
[3].
When driving the Screw [2], be cautious not to pinch the Harness.
E2
[2]
[1]
[3]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-224.png "Page 225
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 225
Confidential
Toner Supply Motor C/K (M7)
1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor C/K
[3].
D2
[1] [3]
[2]
Toner Supply Motor Y/M (M6)
1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor Y/M
[3].
When driving the Screw [2], be cautious not to pinch the Harness.
E2
[2]
[1]
[3]")
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 221 Confidential4.3.8 Group 8CONTENT Parts/Units to be Disassembled Guide Right Rear Cover + Rear CoverStandard cassette Paper Size Board (PWB-I)Fusing Drive Motor (M4)Toner Supply Motor C/K (M7)Toner Supply Motor Y/M (M6) ABCDE Rear Cover A Right Rear Cover A Standard cassette Paper Size Board (PWB-I) B Fusing Drive Motor (M4) C Toner Supply Motor C/K (M7) D Toner Supply Motor Y/M (M6) E
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 222 ConfidentialDISASSEMBLY FLOWCHART C1 B1 A1 E1 D1 B2 C2 D2 E2 Start Right Rear Cover + Rear Cover (P. 223) Standard cassette Paper Size Board (PWB-I) (P. 223) Fusing Drive Motor (M4) (P. 224) Toner Supply Motor C/K (M7) (P. 225) Toner Supply Motor Y/M (M6) (P. 225)
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 223 Confidential Right Rear Cover + Rear Cover 1. Open the Right Door [1]. 2. Remove three Screws [2], and remove the Right Rear Cover [3]. 3. Remove nine Screws [4], and remove the Rear Cover [5]. A1 B1 D1 C1 E1 [1] [3] [2] [4][4] [4] [5] Standard cassette Paper Size Board (PWB-I) 1. Slide out the Paper Cassette 1. 2. Remove two Screws [1], the Connector [2] and remove the Standard cassette Paper Size Board Assy (PWB-I) [3]. B2 [1] [2][3] 4038F2C088DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 224 Confidential3. Remove the Lever [4]. 4. Remove the Standard cassette Paper Size Board (PWB-I) [5]. Be cautious for working not to deform the Lever parts. [4] [5] 4038F2C516DA Fusing Drive Motor (M4) 1. Remove the Connector [1] and two Screws [2], and remove the Fusing Drive Motor (M4) [3]. C2 [1][2] [3] 4039F2C518DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 225 Confidential Toner Supply Motor C/K (M7) 1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor C/K [3]. D2 [1] [3] [2] Toner Supply Motor Y/M (M6) 1. Remove the Connector [1] and two Screws [2], and remove the Toner Supply Motor Y/M [3]. When driving the Screw [2], be cautious not to pinch the Harness. E2 [2] [1] [3]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 226 Confidential4.3.9 Group 9CONTENT Parts/Units to be Disassembled Guide Color Developing Motor (M3)Color PC Drum Motor (M2)Main Motor (M1) ABC Color Developing Motor (M3) A Main Motor (M1) C Color PC Drum Motor (M2) B
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 227 ConfidentialDISASSEMBLY FLOWCHART C1 B1 A1 A2 B2 C2 Start Right Rear Cover + Rear Cover (P. 228) Color Developing Motor (M3) (P. 228) Color PC Drum Motor (M2) (P. 229) Main Motor (M1) (P. 229)
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 228 Confidential Right Rear Cover + Rear Cover 1. Open the Right Door [1]. 2. Remove three Screws [2], and remove the Right Rear Cover [3]. 3. Remove nine Screws [4], and remove the Rear Cover [5]. A1 B1 C1[1] [3] [2] [4][4] [4] [5] Color Developing Motor (M3) 1. Remove the Connector [1] and four Screws [2], and remove the Color Developing Motor [3]. A2[3] [2] [1] 4038F2C149DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 229 Confidential Color PC Drum Motor (M2) 1. Remove the Connector [1] and four Screws [2], and remove the Color PC Drum Motor [3]. B2 [1][2] [3] 4038F2C150DA Main Motor (M1) 1. Remove the Connector [1] and four Screws [2], and remove the Main Motor [3]. C2 [1] [2] [3] 4039F2C517DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 230 Confidential4.3.10 Group 10CONTENT Parts/Units to be Disassembled Guide High Voltage Unit (HV1)Transfer Drive AssyFusing Drive Assy1st Image Transfer Pressure/Retraction Clutch (CL3) ABCD High Voltage Unit (HV1) A 1st Image Transfer Pressure/Retraction Clutch (CL3) D Transfer Drive Assy B Fusing Drive Assy C