Epson EPL N3000DTS User Manual

							38Using the Standard Printer Software 3. Select the Zoom To check box. Then specify the magnification 
percentage in the box.
Note:
The percentage can be set between 50% and 200% in 1% increments.
4. Click OK to accept the settings.
If necessary, select the paper size to be printed from the Output 
Paper drop-down list.
1
2
 
						

							Using the Standard Printer Software39
3
3
3
3
3
3
3
3
3
3
3
3
Modifying the print layout
Your printer can print either two or four pages onto a single page 
and specifies the printing order, automatically resizing each page 
to fit the specified paper size. You can also choose to print 
documents surrounded by a frame.
1. Click the Layout tab.
2. Select the Print Layout check box, and click Print Layout 
Settings. The Print Layout Settings dialog box appears.
1
2
 
						

							40Using the Standard Printer Software 3. Select the number of pages you want to print on one sheet of 
paper. Then Select the Page Order in which the pages are 
printed on each sheet.
4. Select the Print the Frame check box when you want to print 
the pages surrounded by a frame.
Note:
The Page Order choices depend on the number of pages selected 
above, and the paper orientation (Portrait or Landscape) selected on 
the Basic Settings menu.
5. Click OK to accept the settings and return to the Layout menu.
Using a watermark
Follow the steps to use a watermark on your document. In the 
Watermark dialog box, you can select from a list of predefined 
watermarks, or you can make an original watermark with text or 
a bitmap. The Watermark dialog box also allows you to make a 
variety of detailed watermark settings. For example, you can 
select the size, intensity, and position of your watermark. 
1. Click the Special tab.
1
2
 
						

							Using the Standard Printer Software41
3
3
3
3
3
3
3
3
3
3
3
3
2. Select the Watermark check box. Then click Watermark 
Settings. The Watermark dialog box appears.
1
2
 
						

							42Using the Standard Printer Software 3. Select a watermark from the Watermark Name drop-down 
list.
4. Adjust the image intensity of the watermark with the Intensity 
slider bar.
5. Select Front (to print the watermark in the foreground of the 
document) or Back (to print the watermark in the background 
of the document) for the Position setting.
6. Select the location on the page where you want to print the 
watermark from the Location drop-down list.
7. Adjust the horizontal or vertical Offset position.
8. Adjust the size of the watermark with the Size slider bar.
9. Click OK to accept the settings and return to the Special menu.
 
						

							Using the Standard Printer Software43
3
3
3
3
3
3
3
3
3
3
3
3
Making a new watermark
You can make a new watermark as follows:
1. Click the Special tab.
2. Select the Watermark check box.
3. Click Watermark Settings. The Watermark dialog box 
appears.
4. Click New/Delete. The User Defined Watermarks dialog box 
appears.
 
						

							44Using the Standard Printer Software 5. Select Text or BMP and type a name for the new watermark 
in the Name box.
Note:
This screen appears when you select the Text button.
6. If you select Text, type the watermark text in the Text box. If 
you select BMP, click Browse, select the BMP file you want to 
use, then click OK.
7. Click Save. Your watermark will appear in the List box.
8. Click OK to register the new watermark settings.
Note:
You can register up to 10 watermarks.
1
2
 
						

							Using the Standard Printer Software45
3
3
3
3
3
3
3
3
3
3
3
3
Using an overlay
The Overlay Settings dialog box allows you to prepare standard 
forms, or templates, that you can use as overlays when printing 
other documents. This feature can be useful for creating corporate 
letterheads or invoices.
Note:
The overlay function is available only when the High Quality (Printer) 
is selected for the Graphic Mode in the Extended Settings dialog box from 
the Optional Settings menu.
Creating an overlay
Follow these steps to create and save a form overlay file:
1. Open your application and create the file that you want to use 
as an overlay.
2. When the file is ready to be saved as an overlay, choose Print 
or Print Setup from the File menu of your application. Then 
click Printer, Setup, Options, Properties, or a combination of 
these buttons, depending on your application.
3. Click the Special tab.
 
						

							46Using the Standard Printer Software 4. Select the Form Overlay check box, and click the Overlay 
Settings. The Overlay Settings dialog box appears.
1
2
 
						

							Using the Standard Printer Software47
3
3
3
3
3
3
3
3
3
3
3
3
5. Click the Create Overlay Data button, then click Settings. The 
Form Settings dialog box appears.
2 1