Honeywell 1900ghd-2 User Manual

							12 - 21
EAN/JAN-13 Addenda 
SeparatorOff E13ADS08-26
*On E13ADS18-26
ISBN Translate *Off E13ISB08-26
On E13ISB18-26
EAN/JAN-8 Default All EAN/
JAN 8 SettingsEA8DFT8-27
Off EA8ENA08-27
*On EA8ENA18-27
EAN/JAN-8 Check Digit Off EA8CKX08-27
*On EA8CKX18-27
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD208-27
2 Digit Addenda On EA8AD218-27
*5 Digit Addenda Off EA8AD508-27
5 Digit Addenda On EA8AD518-27
EAN/JAN-8 Addenda Required *Not Required EA8ARQ08-28
Required EA8ARQ18-28
EAN/JAN-8 Addenda 
SeparatorOff EA8ADS08-28
*On EA8ADS18-28
MSI Default All MSI Settings MSIDFT8-29
*Off MSIENA08-29
On MSIENA18-29
MSI Check Character *Validate Type 10, but Don’t 
TransmitMSICHK08-29
Validate Type 10 and 
TransmitMSICHK18-29
Validate 2 Type 10 Chars, but Don’t 
TransmitMSICHK28-29
Validate 2 Type 10 Chars and 
TransmitMSICHK38-29
Validate Type 11 then Type 10 
Char, but Don’t TransmitMSICHK48-29
Validate Type 11 then Type 10 
Char and TransmitMSICHK58-30
Disable MSI Check Characters MSICHK68-30
MSI Message Length Minimum (4 - 48) *4 MSIMIN##8-30
Maximum (4 - 48) *48 MSIMAX##8-30
GS1 DataBar Omnidirectional Default All 
GS1 DataBar Omnidirectional 
SettingsRSSDFT8-31
Off RSSENA08-31
*On RSSENA18-31
GS1 DataBar Limited Default All GS1 DataBar Limited 
SettingsRSLDFT8-31
Off RSLENA08-31
*On RSLENA18-31 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 22
GS1 DataBar Expanded Default All GS1 DataBar 
Expanded SettingsRSEDFT8-32
Off RSEENA08-32
*On RSEENA18-32
GS1 DataBar Expanded Msg. 
LengthMinimum (4 - 74) *4 RSEMIN##8-32
Maximum (4 - 74) *74 RSEMAX##8-32
Trioptic Code *Off TRIENA08-32
On TRIENA18-32
Codablock A Default All Codablock A Settings CBADFT8-33
*Off CBAENA08-33
On CBAENA18-33
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN###8-33
Maximum (1 - 600) *600 CBAMAX###8-33
Codablock F Default All Codablock F Settings CBFDFT8-34
*Off CBFENA08-34
On CBFENA18-34
Codablock F Msg. Length Minimum (1 - 2048) *1 CBFMIN####8-34
Maximum (1 - 2048) *2048 CBFMAX####8-34
Label Code On LBLENA18-34
* Off LBLENA08-34
PDF417 Default All PDF417 Settings PDFDFT8-35
*On PDFENA18-35
Off PDFENA08-35
PDF417 Msg. Length Minimum (1-2750) *1 PDFMIN####8-35
Maximum (1-2750)  *2750 PDFMAX####8-35
MacroPDF417 *On PDFMAC18-36
Off PDFMAC08-36
MicroPDF417 Default All Micro PDF417 Settings MPDDFT8-36
On MPDENA18-36
*Off MPDENA08-36
MicroPDF417 Msg. Length Minimum (1-366) *1 MPDMIN###8-36
Maximum (1-366)  *366 MPDMAX###8-36
GS1 Composite Codes On COMENA18-36
*Off COMENA08-36
UPC/EAN Version On COMUPC18-37
*Off COMUPC08-37
GS1 Composite Codes Msg. LengthMinimum (1-2435)  *1 COMMIN####8-37
Maximum (1-2435) *2435 COMMAX####8-37
GS1 Emulation GS1-128 Emulation EANEMU18-37
GS1 DataBar Emulation EANEMU28-36
GS1 Code Expansion Off EANEMU38-38
EAN8 to EAN13 Conversion EANEMU48-38
*GS1 Emulation Off EANEMU08-38 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 23
TCIF Linked Code 39 On T39ENA18-38
*Off T39ENA08-38
QR Code Default All QR Code Settings QRCDFT8-38
*On QRCENA18-38
Off QRCENA08-38
QR Code Msg. Length Minimum (1-7089) *1 QRCMIN####8-39
Maximum (1-7089) *7089 QRCMAX####8-39
QR Code Append *On QRCAPP18-39
Off QRCAPP08-39
QR Code Page QR Code Page (*3) QRCDCP##8-39
Data Matrix Default All Data Matrix Settings IDMDFT8-40
*On IDMENA18-40
Off IDMENA08-40
Data Matrix Msg. Length Minimum (1-3116) *1 IDMMIN####8-40
Maximum (1-3116) *3116 IDMMAX####8-40
Data Matrix Append *On IDMAPP18-40
Off IDMAPP08-40
Data Matrix Code Page Data Matrix Code Page (*51) IDMDCP##8-40
MaxiCode Default All MaxiCode Settings MAXDFT8-41
On MAXENA18-41
*Off MAXENA08-41
MaxiCode Msg. Length Minimum (1-150) *1 MAXMIN###8-41
Maximum (1-150) *150 MAXMAX###8-41
Aztec Code Default All Aztec Code Settings AZTDFT8-42
*On AZTENA18-42
Off AZTENA08-42
Aztec Code Msg. Length Minimum (1-3832) *1 AZTMIN####8-42
Maximum (1-3832) *3832 AZTMAX####8-42
Aztec Append *On AZTAPP18-42
Off AZTAPP08-42
Aztec Code Page Aztec Code Page (*51) AZTDCP##8-42
Chinese Sensible (Han Xin) Code Default All Han Xin Code Settings HX_DFT8-43
On HX_ENA18-43
*Off HX_ENA08-43
Chinese Sensible (Han Xin) Code 
Msg. LengthMinimum (1-7833) *1 HX_MIN####8-43
Maximum (1-7833) *7833 HX_MAX####8-43
Postal Codes - 2D
2D Postal Codes *Off POSTAL08-44 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 24
Single 2D Postal Codes Australian Post On POSTAL18-44
British Post On POSTAL78-44
Canadian Post On POSTAL308-44
Intelligent Mail Bar Code On POSTAL108-44
Japanese Post On POSTAL38-44
KIX Post On POSTAL48-44
Planet Code On POSTAL58-44
Postal-4i On POSTAL98-44
Postnet On POSTAL68-45
Postnet with B and B’ Fields On POSTAL118-45
InfoMail On POSTAL28-45
Combination 2D Postal Codes InfoMail and British Post  On POSTAL88-45
Intelligent Mail Bar Code and 
Postnet with B and B’ Fields OnPOSTAL208-45
Postnet and Postal-4i On POSTAL148-45
Postnet and Intelligent Mail Bar 
Code OnPOSTAL168-45
Postal-4i and Intelligent Mail Bar 
Code OnPOSTAL178-45
Postal-4i and Postnet with B and B’ 
Fields OnPOSTAL198-45
Planet and Postnet On POSTAL128-45
Planet and Postnet with B and B’ 
Fields OnPOSTAL188-46
Planet and Postal-4i On POSTAL138-46
Planet and Intelligent Mail Bar 
Code OnPOSTAL158-46
Planet, Postnet, and Postal-4i On POSTAL218-46
Planet, Postnet, and Intelligent 
Mail Bar Code OnPOSTAL228-46
Planet, Postal-4i, and Intelligent 
Mail Bar Code OnPOSTAL238-46 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 25
Combination 2D Postal Codes
(continued)Postnet, Postal-4i, and Intelligent 
Mail Bar Code OnPOSTAL248-46
Planet, Postal-4i, and Postnet with 
B and B’ Fields OnPOSTAL258-46
Planet, Intelligent Mail Bar Code, 
and Postnet with B and B’ Fields 
OnPOSTAL268-46
 Postal-4i, Intelligent Mail Bar 
Code, and Postnet with B and B’ 
Fields OnPOSTAL278-46
Planet, Postal-4i, Intelligent Mail 
Bar Code, and Postnet  OnPOSTAL288-47
Planet, Postal-4i, Intelligent Mail 
Bar Code, and Postnet with B and 
B’ Fields OnPOSTAL298-46
Planet Code Check Digit Transmit PLNCKX18-47
*Don’t Transmit PLNCKX08-47
Postnet Check Digit Transmit NETCKX18-47
*Don’t Transmit NETCKX08-47
Australian Post Interpretation Bar Output AUSINT08-48
Numeric N Table AUSINT18-48
Alphanumeric C Table AUSINT28-48
Combination N and C Tables AUSINT38-48
Postal Codes - Linear
China Post (Hong Kong 2 of 5)  Default All China Post (Hong Kong 
2 of 5) SettingsCPCDFT8-48
*Off CPCENA08-48
On CPCENA18-48
China Post (Hong Kong 2 of 5) Msg. 
LengthMinimum (2 - 80) *4 CPCMIN##8-48
Maximum (2 - 80) *80 CPCMAX##8-48
Korea Post Default All Korea Post Settings KPCDFT8-49
*Off KPCENA08-49
On KPCENA18-49
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN##8-49
Maximum (2 - 80) *48 KPCMAX##8-49
Korea Post Check Digit Transmit Check Digit KPCCHK18-49
*Don’t Transmit Check Digit KPCCHK08-49 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 26
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT9-1
Imaging Style - Decoding SNPSTY09-1
*Imaging Style - Photo SNPSTY19-1
Imaging Style - Manual SNPSTY29-1
Beeper On SNPBEP19-1
*Beeper Off SNPBEP09-1
*Wait for Trigger Off SNPTRG09-2
Wait for Trigger On SNPTRG19-2
*LED State - Off SNPLED09-2
LED State - On SNPLED19-2
Exposure (1-7874 microseconds) SNPEXP9-2
*Gain - None SNPGAN19-2
Gain - Medium SNPGAN29-2
Gain - Heavy SNPGAN49-2
Gain - Maximum SNPGAN89-2
Target White Value (0-255) *125 SNPWHT###9-3
Delta for Acceptance (0-255) *25 SNPDEL###9-3
Update Tries (0-10) *6 SNPTRY##9-3
Target Set Point Percentage (1-99) 
*50SNPPCT##9-3 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 27
Image Ship *Infinity Filter - Off IMGINF09-4
Infinity Filter - On IMGINF19-4
*Compensation Off IMGCOR09-4
Compensation On IMGCOR19-4
*Pixel Depth - 8 bits/pixel 
(grayscale)IMGBPP89-4
Pixel Depth - 1 bit/pixel (B&W) IMGBPP19-4
*Don’t Sharpen Edges IMGEDG09-5
Sharpen Edges (0-23) IMGEDG##9-5
*File Format - JPEG IMGFMT69-5
File Format - KIM IMGFMT09-5
File Format - TIFF binary IMGFMT19-5
File Format - TIFF binary group 4, 
compressedIMGFMT29-5
File Format - TIFF grayscale IMGFMT39-5
File Format - Uncompressed 
binaryIMGFMT49-5
File Format - Uncompressed 
grayscaleIMGFMT59-5
File Format - BMP IMGFMT89-5
*Histogram Stretch Off IMGHIS09-5
Histogram Stretch On IMGHIS19-5
*Noise Reduction Off IMGFSP09-6
Noise Reduction On IMGFSP19-6
Image Ship (continued) Invert Image around X axis IMGNVX19-6
Invert Image around Y axis IMGNVY19-6
Rotate Image none IMGROT09-7
Rotate Image 90° right IMGROT19-7
Rotate Image 180° right IMGROT29-7
Rotate Image 90° left IMGROT39-7
JPEG Image Quality (0-100) *50 IMGJQF###9-7
*Gamma Correction Off IMGGAM09-7
Gamma Correction On (0-1000) IMGGAM###9-7
Image Crop - Left (0-843) *0 IMGWNL###9-8
Image Crop - Right (0-843) *843 IMGWNR###9-8
Image Crop - Top (0-639) *0 IMGWNT###9-8
Image Crop - Bottom (0-639) *639 IMGWNB###9-8
Image Crop - Margin (1-238) *0 IMGMAR###9-8
Protocol - None (raw) IMGXFR09-8
Protocol - None (default USB) IMGXFR29-8
Protocol - Hmodem Compressed IMGXFR39-8
Protocol - Hmodem IMGXFR49-8
Ship Every Pixel IMGSUB19-8 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							12 - 28
Image Ship (continued) Ship Every 2nd Pixel IMGSUB29-8
Ship Every 3rd Pixel IMGSUB39-9
*Document Image Filter Off IMGUSH09-9
Document Image Filter On (0-255) IMGUSH###9-9
*Don’t Ship Histogram IMGHST09-9
Ship Histogram IMGHST19-9
Image Size Compatibility Force VGA Resolution IMGVGA19-10
*Native Resolution IMGVGA09-10
Intelligent Signature Capture Optimize On DECBND19-10
*Optimize Off DECBND09-10
Utilities
Add Code I.D. Prefix to All Symbologies (Temporary) PRECA2,BK2995C80!11-1
Show Decoder Revision REV_DR11-1
Show Scan Driver Revision REV_SD11-1
Show Software Revision REVINF11-1
Show Data Format DFMBK3?11-1
Test Menu On TSTMNU111-2
*Off TSTMNU011-2
Application Plug-Ins (Apps) *Decoding Apps On PLGDCE111-2
Decoding Apps Off PLGDCE011-2
*Formatting Apps On PLGFOE111-2
Formatting Apps Off PLGFOE011-2
List Apps PLGINF11-2
Resetting the Factory Defaults Remove Custom Defaults DEFOVR11-4
Activate Defaults  DEFALT11-4 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							13 - 1
13
Product Specifications
Xenon 1900/1910 Corded Scanner Product Specifications
Parameter Specification
Dimensions (Typical):
Height
6.3 inches (160mm)
Length
4.1 inches (104.1mm)
Width
2.8 inches (71.1mm)
Weight
5.2 ounces (147.42g)
Illumination LED:
Peak Wavelength
624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
442nm, 552nm (white LED)  
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser
650nm  
IEC 60825-1: “Class 2”
Peak Wavelength LED
624nm +
 18nm  (red LED)
520nm + 18nm   (green LED)
IEC 62471: “Exempt Risk Group”
Optical Power Laser

						

							13 - 2
Xenon 1902/1912 Cordless Scanner Product Specifications
*Storage outside of this temperature range could be detrimental to battery life. Parameter Specification
Dimensions (Typical):
Height
6.3 inches (160mm)
Length
4.1 inches (104.1mm)
Width
2.8 inches (71.1mm)
Weight
7.5 ounces (212.62g)
Illumination LED:
Peak Wavelength
624nm +
 18nm (red LED)
IEC 62471: “Exempt Risk Group”
442nm, 552nm (white LED)  
IEC 62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser
650nm  
IEC 60825-1: “Class 2”
Peak Wavelength LED
624nm +
 18nm  (red LED)
520nm + 18nm   (green LED)
IEC 62471: “Exempt Risk Group”
Optical Power Laser