Home > Land Rover > Automobile > Land Rover Defender 02my Owners Handbook 2nd Edition Rover

Land Rover Defender 02my Owners Handbook 2nd Edition Rover

    Download as PDF Print this page Share this page

    Have a look at the manual Land Rover Defender 02my Owners Handbook 2nd Edition Rover online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							150 
    						
    							Technical Data
    151
    T ec hni ca l D a ta
    T echnical DataLUBRICANTS AND FLUIDS
    Recommendations for all climates and conditions.
    Engine oil - Td5 engines
    Use a 5W/30, 5W/40, 5W/50 oil meeting specification ACEA: A1 and B1, and having a viscosity band 
    recommended for the temperature range of your locality.
    NOTE: ACEA B2 oils are also suitable.
    Engine oil - Tdi engines
    Use a 5W/30, 5W/40, 5W/50, 10W/30, 10W/40 or 10W/50 oil meeting specification ACEA: B2 and 
    having a viscosity band recommended for the temperature range of your locality.
    NOTE: ACEA B2 oils are also suitable.
    Main gearbox
    Use Texaco MTF 94 oil.
    Transfer gearbox
    Multigear Texaco 75W/90R or oil to meet API GL5.
    Final drive units 
    Molytex 90W EP.
    Power steering
    ATF M2C 33 (F or G) or L ATF Dexron IID, IIE or III.
    5W/30    5W/40    5W/50   10W/30   10W/40  10W/50  10W/60 50
    40
    30
    20
    ˚C 10
    0
    -10
    -20
    -30
    H3540 
    						
    							Technical Data
    152
    Lubrication nipples
    (hubs, ball joints, prop. shafts, etc.)
    NLGI-2 Multipurpose Lithium based grease.
    Brake & clutch reservoirs
    Universal brake fluids or any brake fluid having a minimum boiling point of 260°C (500°F) and 
    complying with FMVSS 116 DOT4.
    Windscreen washers
    Screen washer fluid.
    Engine cooling system
    Use Havoline Extended Life Coolant (XLC), or any ethylene glycol based anti-freeze (containing no 
    methanol) with only Organic Acid Technology (OAT) corrosion inhibitors. Use one part anti-freeze to 
    one part water for protection down to -36° C (-33° F).
    Air conditioning compressor
    Nippondenso ND-8 or Unipart ND-8. 
    Door locks (anti-burst) and inertia reel seat belts
    DO NOT LUBRICATE. These components are lubricated for life during manufacture. 
    						
    							Technical Data
    153
    CAPACITIES
    The following capacities are approximate and provided as a guide only. All oil levels must be checked 
    using the dipstick or level plugs as applicable.
    Fuel tank: 
     - 110 & 130 models 75 litre (16.50 gall)
     - 90 models 60 litre (13.20 gall)
    Engine oil (from dry):
    - Td5 engines 7,2 litre (12.67 pt)
    - Tdi engines 5,8 litre (10.15 pt)
    Additional capacity after fitting new oil filter:
    - Td5 engines 1,00 litre (1.76 pt)
    - Tdi engines 0,85 litre (1.50 pt)
    Main gearbox 2,38 litre (4.19 pt)
    Transfer box 2,30 litre (4.0 pt)
    Front differential 1,70 litre (2.9 pt)
    Rear differential:  1,70 litre (2.9 pt)
     - 110 & 130 models 2,26 litre (4.0 pt)
     - 90 models 1,70 litre (3.0 pt)
    Cooling system:
    - Td5 engines 13,0 litre (22.88 pt) 
    - Tdi engines 11,10 litre (20.0 pt) 
    						
    							Technical Data
    154
    ENGINES
    Td5 Diesel
    Tdi DieselFuel Diesel or Automotive Gas Oil (AGO) to EN 590 
    specification
    Capacity 2498 cm
    3 (154 in3)
    Firing order 1-2-4-5-3
    Bore 84,45 mm (3.3248 in)
    Stroke 88,95 mm (3.5020 in)
    Number of cylinders 5
    Compression ratio 19.5:1
    Fuel Diesel or Automotive Gas Oil (AGO) to EN 590 
    specification
    Capacity 2495 cm
    3 (152 in3)
    Firing order 1-3-4-2
    Bore 90,47 mm (3.562 in)
    Stroke 97,00 mm (3.819 in)
    Number of cylinders 4
    Compression ratio 19.5:1 
    						
    							Technical Data
    155
    ELECTRICAL SYSTEM
    STEERING
    Battery type:
    - Td5 engines Delphi YGD 100860, sealed for life
    - Tdi engines Delphi YGD 100850, sealed for life
    Battery rating:
    - Td5 engines 100 amp/hr
    - Tdi engines 72 amp/hr
    Voltage and polarity 12 V, negative (-) earth
    Charging circuit Alternator
    Steering wheel turns lock to lock:
     - Manual steering 4.3
     - Power assisted steering 3.38
    Turning circle between kerbs:
     - 90 models 11,7 m (38.4 ft) minimum
     - 110 models 13,41 m (44 ft) minimum
     - 130 models 15,24 m (50 ft) minimum
    Camber angle 0°
    Castor angle 3°
    Swivel pin inclination 7°
    Front wheel toe-out included angle 0 to 2 mm 
    						
    							Technical Data
    156
    WHEELS & TYRES
    Tyre pressures (normal - all load conditions)
    90 models:
    110 models:
    130 models:
    NOTE: Tyre pressures must be checked with the tyres cold, as the pressure is about 0.21 bar 
    (3 lbf/in
    2) higher at running temperature. If the vehicle has been parked in the sun or high ambient 
    temperatures, DO NOT reduce the tyre pressures, move the vehicle into the shade and wait for the 
    tyres to cool before checking the pressures.
    WARNING
    ALWAYS use the same make and type of 
    radial-ply tyres, front and rear. DO NOT use 
    cross-ply tyres or interchange tyres from 
    front to rear.
    If the wheel is marked ‘TUBED’, an inner tube 
    MUST be fitted, even with a tubeless tyre.
    If the wheel is marked ‘TUBELESS’, an inner 
    tube must NOT be fitted.
    Loading conditionPressure - bar (lbf/in2)
    205/80 R16 radial & 750 R16 radial Front 1.9 (28)
    Rear 2.6 (38)
    Loading conditionPressure - bar (lbf/in2)
    235/85 R16 radial & 750 R16 radial Front 1.9 (28)
    Rear 3.3 (48)
    Loading conditionPressure - bar (lbf/in2)
    750 R16 radial Front 3.0 (44)
    Rear 4.5 (65) 
    						
    							Technical Data
    157
    DIMENSIONS
    110 Station Wagon illustrated
    90 models
    AOverall width  1790 mm (70.5 in)
    BOverall height: 1940 mm (76.4 in)
     - Soft top 1965 mm (77.4 in)
     - Pick-up & Station Wagon 1963 mm (77.3 in)
     - Hard top 1972 mm (77.6 in)
    CSee ‘OFF-ROAD PERFORMANCE’, page 159
    DSee ‘OFF-ROAD PERFORMANCE’, page 159
    EWheelbase 2360 mm (92.9 in)
    FOverall length:
     - Soft top & Pick-up 3722 mm (146.5 in)
     - Hard top & Station Wagon 3883 mm (152.9 in)
    GSee ‘OFF-ROAD PERFORMANCE’, page 159
    Track - front/rear 1486 mm (58.5 in)
    Width between wheel boxes  925 mm (36.4 in)
    DEFENDER
    B
    ACG
    D
    E
    F
    H3752 
    						
    							Technical Data
    158
    110 models
    130 modelsAOverall width 1790 mm (70.5 in)
    BOverall height 2035 mm (80.1 in)
    CSee ‘OFF-ROAD PERFORMANCE’, page 159
    DSee ‘OFF-ROAD PERFORMANCE’, page 159
    EWheelbase 2794 mm (110 in)
    FOverall length:
    Soft top & Pick-up 4438 mm (175 in)
    High capacity pick-up 4631 mm (182 in)
    Hard top, Station Wagon & County 4599 mm (181 in)
    GSee ‘OFF-ROAD PERFORMANCE’, page 159
    Track - front/rear 1486 mm (58.5 in)
    Width between wheel boxes:
     - High capacity pick-up 1090 mm (43 in)
     - All other models 925 mm (36.4 in)
    AOverall width  1790 mm (70.5 in)
    BOverall height 2035 mm (80.1 in)
    CSee ‘OFF-ROAD PERFORMANCE’, page 159
    DSee ‘OFF-ROAD PERFORMANCE’, page 159
    EWheelbase 3226 mm (127 in)
    FOverall length  5132 mm (202 in)
    GSee ‘OFF-ROAD PERFORMANCE’, page 159
    Track - front/rear 1486 mm (58.5 in)
    Width between wheel boxes 1090 mm (43 in) 
    						
    							Technical Data
    159
    OFF-ROAD PERFORMANCE
    90 models
    NOTE: Departure angles do not account for the addition of a tow hitch.
    110 & 130 models
    NOTE: Departure angles do not account for the addition of a tow hitch.Maximum gradient (at EEC kerb weight) 45°
    CApproach angle (at EEC kerb weight):
    - Soft top & Pick-up 48°
    - Hard top & Station Wagon 51.5°
    DRamp breakover angle (at EEC kerb weight):
    - Soft top & Pick-up 145º
    - Hard top & Station Wagon 141º
    GDeparture angle (at EEC kerb weight)
    - Soft top & Pick-up 49°
    - Hard top & Station Wagon 53°
    Wading depth 500 mm (21.0 in)
    Minimum ground clearance (unladen): 253.5 mm (10.0 in)
     - Soft top & Pick-up 191 mm (7.5 in)
     - Hard top & Station Wagon 229 mm (9.0 in)
    Maximum gradient (at EEC kerb weight) 45°
    CApproach angle (at EEC kerb weight) 50°
    DRamp breakover angle (at EEC kerb weight):
    - 110 models 152º
    - 130 models 155º
    GDeparture angle (at EEC kerb weight):
    - 110 models 35°
    - 130 models 34°
    Wading depth 500 mm (21.0 in)
    Minimum ground clearance (unladen) 215 mm (8.5 in) 
    						
    All Land Rover manuals Comments (0)

    Related Manuals for Land Rover Defender 02my Owners Handbook 2nd Edition Rover