Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Application Notes For Type Approval Manual
Lucent Technologies Definity Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
103 China
Luc ent rec ommend s the following c all typ es b e used :
System Parameters Administration
Only those feature-related p arameters that may have a Typ e Ap p roval or b asic
c onnec tivity imp lic ation for a p artic ular c ountry are listed here.
nFeature-Related System Parameters Ad ministration
— System-Parameters Customer-Op tions int: For all international numbers.
natl: For all national PN numb ers.
pubu: For all other external (that is, not extensions) numbers.
change system-parameters customer-options Page 1 of 2
OPTIONAL FEATURES
ARS? y
Page 2 of 2
Multifrequency Signaling? y
display system-parameters country-options Page 1 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Companding Mode: A-Law Base Tone Generator Set: 18
440Hz PBX-dial Tone? n 440Hz Secondary-dial Tone? n
Digital Loss Plan: 18
Analog Ringing Cadence: 18 Set Layer 1 timer T1 to 30 seconds? n
Analog Line Transmission: 18
TONE DETECTION PARAMETERS
Tone Detection Mode: 4 Dial Tone Validation Timer(msec): 600
Interdigit Pause: long
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
104 China
System-Parameters Country-Options
display system-parameters country-options Page 2 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
PBX-dial 1: 440/-11.0 Duration(msec): 100
2: goto Step: 1
3:
display system-parameters country-options Page 3 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
confirmation 1: 440/-11.0 Duration(msec): 400
2: silence Duration(msec): 50
3: 440/-11.0 Duration(msec): 400
4: silence Duration(msec): 50
5: 440/-11.0 Duration(msec): 400
6: silence Duration(msec): 50
7:
display system-parameters country-options Page 4 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
busy 1: 440/-11.0 Duration(msec): 350
2: silence Duration(msec): 350
3: goto Step: 1
4:
display system-parameters country-options Page 5 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
reorder 1: 440/-11.0 Duration(msec): 700
2: silence Duration(msec): 700
3: goto Step: 1
4:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
105 China
display system-parameters country-options Page 6 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
ringback 1: 440/-11.0 Duration(msec): 1000
2: silence Duration(msec): 4000
3: goto Step: 1
4:
5:
display system-parameters country-options Page 7 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
intercept 1: 440/-11.0 Duration(msec): 100
2: silence Duration(msec): 100
3: 440/-11.0 Duration(msec): 100
4: silence Duration(msec): 100
5: 440/-11.0 Duration(msec): 100
6: silence Duration(msec): 100
7: 440/-11.0 Duration(msec): 400
8: silence Duration(msec): 400
9: goto Step: 1
10:
display system-parameters country-options Page 8 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
intrusion 1: 440/-17.25 Duration(msec): 200
2: silence Duration(msec): 200
3: 440/-17.25 Duration(msec): 200
4: silence Duration(msec): 600
5: goto Step: 1
6:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
106 China
display system-parameters country-options Page 9 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
1-call-wait 1: 440/-11.0 Duration(msec): 400
2:
display system-parameters country-options Page 10 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
2-call-wait 1: 440/-11.0 Duration(msec): 200
2: silence Duration(msec): 100
3: 440/-11.0 Duration(msec): 200
4:
display system-parameters country-options Page 11 of 21 SPE A
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
conference 1: 950/-10.0 Duration(msec): 400
2: silence Duration(msec): 10000
3: goto Step: 1
4:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
107 China
System-Parameters Features
display system-parameters features Page 1 of 6 SPE A
FEATURE-RELATED SYSTEM PARAMETERS
Trunk-to-Trunk Transfer: all
Coverage - Subsequent Redirection No Answer Interval: 2
Coverage - Caller Response Interval (seconds): 4
Keep Held SBA at Coverage Point? y
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 10
AAR/ARS Dial Tone Required? y
Music/Tone on Hold: tone
Music (or Silence) on Transferred Trunk Calls? no
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? n
Internal Automatic Answer for Attendant Extended Calls? n
Automatic Circuit Assurance (ACA) Enabled? n
Abbreviated Dial Programming by Assigned Lists? n
Auto Abbreviated/Delayed Transition Interval (rings): 2
display system-parameters features Page 5 of 6 SPE A
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5
Conference Parties with Public Network Trunks: 6
Conference Parties without Public Network Trunks: 6
Night Service Disconnect Timer (seconds): 180
Short Interdigit Timer (seconds): 3
Unanswered DID Call Timer (seconds):
Line Intercept Tone Timer (seconds): 30
Auto Start? n
Auto Hold? y
Attendant Tone? y
Bridging Tone? n
Conference Tone? y
Intrusion Tone? y
DID Busy Treatment: tone
Allow AAR/ARS Access from DID/DIOD? n
DISTINCTIVE AUDIBLE ALERTING
Internal: 1 External: 2 Priority: 3
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
108 China
Analog Trunk Administration
Analog CO Trunks
nTrunk Group sc reen
— Outg oing Dial Typ e: tone or rotary (d ep ending on what is ac c ep ted
b y the serving switc h)
display system-parameters features Page 6 of 6 SPE A
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n
Level Of Tone Detection: broadband
Wait Answer Supervision Timer? n
Repetitive Call Waiting Tone? n
Outpulse Without Tone? n
Network Feedback During Tone Detection? n
Intercept Treatment On Failed Trunk Transfers? y
Vector Disconnect Timer (min):
Station Busy Tone Forward Disconnect? n
Misoperation Alerting? y
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 1000
Lower Bound (msec): 200
Forward Disconnect Timer (msec): 600
ENHANCED DCS
Enhanced DCS Enabled? n
display trunk-group 1 Page 1 of 10
TRUNK GROUP
Group Number: Group Type: co
Direction: two-way
Dial Access? n
Country: 18
Prefix-1? n Trunk Flash? y Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: loop-start
Outgoing Dial Type: tone or rotary Cut-Through? n
Trunk Termination: rc Disconnect Timing(msec): 500
Auto Guard? n Call Still Held? n Sig Bit Inversion: none
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
109 China
The following tab le g ives ad min values that are based on the length of the trunk
loop . Choose short for type ap p roval:
nPPM? y (if provided by the serving switch)
Route Pattern Ad ministration
nFirst Dial Tone Detec tion (need ed on analog CO trunks)
— Numb er Delete Dig its: 0
— Inserted Digits: +
Digital Trunk Administration
This sec tion d oes not list all p ossib le valid ad ministrable c omb inations. Rather
the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and
Typ e Ap proval stand ard s for eac h c ountry, is p resented .Loop Length Trunk Gain Terminal Balance RA Trunk Loss
short low n 0d B
long high n 2dB
Disconnect Supervision - In? y Out? n Cyclical Hunt? y
Answer Supervision Timeout: 10 Receive Answer Supervision? n
display trunk-group 1 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 600 Outgoing Disconnect(msec): 600
Outgoing Dial Guard(msec): 100
Incoming Glare Guard(msec): 1000 Outgoing Glare Guard(msec): 1000
Outgoing Rotary Dial Interdigit(msec): 800
Ringing Monitor(msec): 5200 Incoming Seizure(msec): 800
Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500
Flash Length(msec): 100
OUTPULSING INFORMATION
PPS: 10 Make(msec): 35 Break(msec): 65 PPM? y Frequency: 16k
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
110 China
nMultifreq uenc y Sig naling
— System-Parameters Multifrequency Signaling screen
nReq uest Inc oming ANI (non-AAR/ARS)? n (to simulate CO,
enter yes)
display system-parameters multifrequency-signaling Page 1 of 3 SPE A
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
Incoming Call Type: group-ii-mfc
Outgoing Call Type: group-ii-mfc
Maintenance Call Type: none
Test Call Extension:
Interdigit Timer (sec): 10
Outgoing Forward Signal Present Timer (sec): 255
Outgoing Forward Signal Absent Timer (sec): 255
Multifrequency Signaling Incoming Intercept Treatment? y
Received Signal Gain(-Loss) (dB): 0
Transmitted Signal Gain(-Loss) (dB): -3
ANI Prefix: 20 Collect All Digits Before Seizure? n
ANI for PBX: 399
Next ANI Digit: next-digit
Request Incoming ANI (non-AAR/ARS)? n
Called Party Category: call-type
Use COR for Calling Party Category? y
display system-parameters multifrequency-signaling Page 2 of 3 SPE A
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
INCOMING FORWARD SIGNAL TYPES INCOMING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO)
----------------------------------------------------------------------------
China req terminology:
PQABCD KD A1,A3 KB
----------------------------------------------------------------------------
Group-I Group-II Group-A Group-B
11: ignored 1: toll-operator 1 : next-digit 1 : free
12: ignored 2: toll-auto 3 : end-of-dial 2 : busy
13: ignored 3: normal 4 : congestion 3 : toll-busy
14: ignored 4: data-call 6 : send-ani 4 : congestion
15: end-of-ani 5: : 5 : intercept
6: : :
7: normal : :
8: normal : :
9: normal : :
10: normal : :
11: normal : :
12: normal : :
13: normal : :
14: normal : :
15: normal : :
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
111 China
NOTE:
In China, the terminology is as follows:
— Group -I = PQABCD
— Group -II = KD
— Group -A = A1, A3
— Group -B = KB
NOTE:
In China, the terminology is as follows:
— Group -I =
X0...X2, P
KA, P’...D’
QABCD
— Group -II = KD
— Group -A = A1, A6, A3’
— Group -B = KB
nDig ital MFC Trunks
— DS1 Ad ministration sc reen
change system-parameters multifrequency-signaling Page 3 of 3 SPE A
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
OUTGOING FORWARD SIGNAL TYPES OUTGOING BACKWARD SIGNAL TYPES
(Tones to CO) (Tones from CO)
----------------------------------------------------------------------------
China req terminology:
X0...X2,P KD A1,A6,A3 KB
KA,P...D
QABCD
----------------------------------------------------------------------------
Group-I Group-II Group-A Group-B
15: end-of-ani 1 : attendant 1: next-digit 1: free
: 2 : toll-auto 2: restart 2: busy
: 3 : normal 3: end-of-dial 3: toll-busy
: 4 : data-call 4: congestion 4: congestion
: : 5: intercept 5: intercept
: 6: send-ani 6: free
: 7: 7: intercept
: 8: 8: congestion
: 9: 9: congestion
: 10: 10: congestion
: 11: 11: congestion
: 12: 12: congestion
: 13: 13: congestion
: 14: 14: congestion
: 15: 15: congestion
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
112 China
nDig ital DIOD Trunks
— Trunk Group sc reen
display ds1 a14 SPE A
DS1 CIRCUIT PACK
Location: 01A14 Name:
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: CAS
Interconnect: CO Country Protocol: 18
Interface Companding: alaw CRC? n
Idle Code: 01010100
MAINTENANCE PARAMETERS
Slip Detection? n Near-end CSU Type: other
display trunk-group 1 Page 1 of 11 SPE A
TRUNK GROUP
Group Number: 1 Group Type: diod CDR Reports? y
Group Name: OUTSIDE CALL COR: 1 TN: 1 TAC: 801
Direction: two-way Outgoing Display? n
Dial Access? y Busy Threshold: 99
Queue Length: 0 Country: 18
Auth Code? n Digit Absorption List:
Prefix-1? y Trunk Flash? n Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: loop-start
Outgoing Dial Type: mf Incoming Dial Type: mf
Trunk Termination: rc
Digit Treatment: Digits:
Expected Digits: Sig Bit Inversion: none
Terminal Balanced? n RA Trunk Loss: 0db
Trunk Gain: high Drop Treatment: silence
Disconnect Supervision - In? y Out? n Cyclical Hunt? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
display trunk-group 1 Page 2 of 11 SPE A
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? n