Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Application Notes For Type Approval Manual
Lucent Technologies Definity Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies Definity Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 353 Poland nId le Cod e: 01010100 — Trunk Group Ad ministration Sc reen (Timing ) Dig ital trunk timing values should b e set as for analog CO trunks. nDID Trunks — DS1 Ad ministration Sc reen nCirc uit Pac k: TN464D (not entered as an ad ministrab le item) nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: CAS nCountry Protoc ol: nInterc onnec t: CO nCRC?: No nId le Cod e: 01010100 — Trunk Group Ad ministration Sc reen (Timing ) Dig ital trunk timing values should b e set as for analog DID trunks. nTi e Tru n k s — Non-ISDN Sig naling Examp le (DS1 Ad ministration Sc reen) nCirc uit Pac k: TN464D (Not entered as ad ministrab le item; TN464C from up g rad es) nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: CAS nCountry Protoc ol: nInterc onnec t: p b x nCRC?: no nId le Cod e: 01010100 — ISDN-PRI (Private Network) Sig naling This examp le assumes use of US Op tion 1 with fac ility assoc iated sig naling . Other feature op tions will req uire c hang es in one or more ad ministered items. nDS1 Ad ministration sc reen — Circ uit Pac k: TN464D (or TN464C from up g rad es) — Bit Rate: 2.048
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 354 Poland — Interfac e Comp anding : A-law — Line Cod ing: HDB3 — Sig naling Mod e: isd n-p ri — Country Protoc ol: 1 — Connec t: p b x — Interfac e: user —CRC: No — Id le Cod e: 01010100 nSignaling Group screen — Assoc iated Sig naling : Yes — Primary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) nTrunk Group Ad ministration sc reen — Group Type: isdn-pri — Servic e Typ e: tie — ISDN-PRI (Public Network) Not available for this c ountry.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 355 Republic of Korea Republic of Korea Ta b l e 4 8 shows the rec ommended c irc uit p ac ks. Table 48. Recommended and Available CPs in Republic of Korea Equipment Equipment Type Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC AC-CMC AC Power Voltag e & Freq 110V/60Hz 220V/60Hz Ring Generator 20Hz Tone Detec tor > TN2182B > TN744D Tone Cloc k > TN2182B TN780 R2MFC Circ uit TN744D Sp eec h Synthesizer > TN725B Call Classifier > TN744D Announc ement TN750C TN750B TN750 Analog DID Trunk > TN753 Analog CO Trunk (No PPM) TN747B TN2147C TN2147 Analog CO Trunk (w/PPM) n/a 4 Wire Tie Trunk > TN760 2 Wire Tie Trunk TN439 Auxiliary Trunk > TN763D Dig ital CO/DID Trunk > TN2464 Dig ital Tie Trunk > TN2464 Dig ital PRI CO Trunk TN2464 Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS n/a Dig ital Converter PRI-DPNSS n/a Dig ital Converter PRI-BRI n/a 8 Port Analog Line TN746B 16 Port Analog Line #TN791 TN479 24 Port Analog Line n/a Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 356 Republic of Korea 4 Wire Digital Line > TN754C 2 Wire Digital Line #TN2214 > TN2181 Data Line > TN726B BRI-U Line TN2198 BRI-ST Line TN556B Table 48. Recommended and Available CPs in Republic of Korea Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 357 Russia Russia Ta b l e 4 9 shows the rec ommended c irc uit p ac ks. Table 49. Recommended and Available CPs in Russia Equipment Equipment Type Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 220V/50Hz Ring Generator 20Hz Tone Detec tor #TN2182B > TN744D TN420C Tone Cloc k #TN2182B > TN780 R2MFC Circ uit > TN744D TN744Bv2 Sp eec h Synthesizer > TN457 Call Classifier > TN744D Announc ement TN750C TN750B Analog DID Trunk > TN753v17 > TN2199 Analog CO Trunk (No PPM) > TN747Bv12 > TN2199 Analog CO Trunk (w/PPM) #TN465C > TN465B TN465 4 Wire Tie Trunk > TN760Dv11 2 Wire Tie Trunk Auxiliary Trunk > TN763D Dig ital CO/DID Trunk > TN464F D i g i t a l Ti e Tr u n k > TN 4 6 4 F Dig ital PRI CO Trunk n/a Dig ital BRI Trunk Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line n/a 16 Port Analog Line > TN746B 24 Port Analog Line n/a Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 358 Russia Country-Specific Features When the Country Code field is 15, Russia Multifreq uenc y Shuttle sig naling c an b e enab led on CO, DID and DIOD trunk g roup s. ANI transmission, whic h uses g ap less R1 multifreq uenc y sig naling and is c ompleted within 800ms, c an b e ad ministered on outg oing CO trunk g roup s. See “ Trunk Group Ad ministration” in the DEFINITY ECS Ad ministration and Feature Desc rip tion. When the Country Code field is 15 and the Protoc ol Typ e field is intol , the new features Intrusion and Re-ring are enab led . On DID and DIOD trunks, when the Country field is 15, the ANI Req uest feature can be enabled when, on the Trunk Group screen, the Protocol Type field is inloc . The ANI is req uested on rotary and shuttle trunks if the inc oming c all is p roc essed throug h the ARS/AAR d ig it analysis (or d ig it c onversion). The ANI Req uest feature c an b e invoked either automatic ally (via ARS/AAR) or b y the user d uring the voic e state of a c all b y p ressing the ani-requ b utton ad ministered on their p hone. Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nARS/AAR Ad ministration To enab le ARS administration, on the System-Parameters Customer-Op tions sc reen, set the ARS field to y . You also should check all ARS/AAR d efaults. All d efault ARS analysis c odes are deleted b efore d ialed strings are ad d ed for routing when DEFINITY is installed outsid e of 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 TN2136 Data Line > TN726B BRI-U Line BRI-ST Line Ta b l e 4 9 .Recommended and Available CPs in Russia — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 359 Russia North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing p rob lems. In p artic ular, the following c all typ es (ap pear as ARS/AAR d efaults) typ ic ally are not used in non-North Americ an ARS/AAR tab les: Luc ent rec ommend s only the following c all typ es b e used outside North Americ a: nANI Transmission In ord er to use ANI transmission, ARS must b e used . If the ANI req uested sig nal is exp ec ted at a c ertain p oint in the d ig it string d uring d ialing , the symb ol & should b e translated in the routing p attern at that p oint. nANI Req uest via ARS/AAR In ord er to ac tivate the ANI Req uest feature, on the AAR/ARS Dig it Analysis Tab le (Dig it Conversion Tab le) sc reen, set the Ani Reqd field to y or r . NOTE: If the op tion r is selec ted , the ANI is req uested on the inc oming trunk (rotary, shuttle, or R2_MFC) and if for any reason is not rec eived , the incoming call drops. NOTE: The capability of dropping the incoming call applies also for ISDN c alls if the CPN is not rec eived and : — on the System Parameter Country-Op tions sc reen, the value of the Base Tone Generator field is 15. — the c all is p roc essed throug h the AAR/ARS Dig it Analysis Tab le (or Digit Conversion Tab le) sc reen and the ANI Req d field is r . Th e v a l u e r for the ANI Req d field is availab le only if, on the Feature-Related System-Parameters sc reen, the Allow ANI Restric tion on AAR/ARS field is y.fnp a: North Americ an numb ers with an area c od e. hnp a: North Americ an numb ers without an area c od e. svc : North Americ an numb ers of the sc reen ‘‘x11’’. int: For all international numbers. natl: For all national PN numb ers. pubu: For all other external (that is, not extensions) numbers.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 360 Russia nANI Request via Feature Button In ord er to ac tivate the ANI Req uest feature via b utton, the user must have the ani-req u b utton ad ministered on their phone. The ANI d isp lays on their p hone only if the user has the mc t-c ontr b utton ad ministered . System Parameter Administration Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. n Feature-Related System Parameters Ad ministration — Trunk-to-Trunk Transfer: Permitted b y c ountry’s reg ulations - Selec tion is c ustomer’s c hoic e. — Pub lic Network Trunks on Conferenc e Call: 5 — Conferenc e Parties With PNTs: 6 — Conferenc e Parties Without PNTs: 6 — Line Interc ep t Tone Timer: 30 — Nig ht Servic e Disc onnec t Timer: 180 sec — Short Interd ig it Timer: 3 sec — Unanswered DID Call Timer: 60 —Auto-Hold: Yes 18 — Attend ant Tone: Yes — Bridg ing Tone: No — Conferenc e Tone: No — Intrusion Tone: Yes — Allow ANI Restric tion on AAR/ARS: Yes — Rep etitive Call Waiting Tone: No — DID Busy Treatment: Attend ant — Pull Transfer: No — Level of Tone Detec tion: Med ium — Outp ulse Without Tone: Yes — (Station-to-switc h) Rec all Timing : nFlashhook Interval: No nDisc onnec t Timing : 350 ms — Station Tone Forward Disc onnec t: Busy 18. Althoug h not a Type App roval issue, this rep resents the convention for this country.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 361 Russia — Network Feed b ac k: No nClass of Restric tion Ad ministration — Categ ory For C.I.S. ANI: 7 nSystem Parameter Country Op tions Ad ministration — Comp and ing Mode: A-law — Base Tone Generation Set: 15 — Tone Detec tion Mod e: 4 — Interd ig it Pause: short — Dig ital Loss Plan: 15 — Analog Ring ing Cad enc e: 15 Analog Trunk Administration nCO Trunks — Trunk Group Sc reen nGroup Typ e: CO nCountry: 15 nTrunk Gain: hig h nDirection: outgoing nDig it Ab sorp tion List: b lank nPre f i x -1 : N o nTrunk Type: loop -start nOutg oing Dial Typ e: rotary nTrunk Termination: 600 ohm nAuto Guard : no nDial Ac c ess: Yes nCall Still Held : no nTerminal Balanc ed : yes nRec eive Answer Sup ervision: yes nAnswer Sup ervision Timeout: 0 (This sets b oth the CP firmware timer and software timer. Set to 0 for any trunk that will rec eive answer sup ervision.) nDisc onnec t Sup ervision - In: yes nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s choice.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 362 Russia nDisc onnec t Timing : 500 msec (This field will not b e used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following CO trunk timer values for this c ountry: nInc oming Disc onnec t: 200 ms nOutg oing Disc onnec t: 200 ms nOutg oing Dial Guard : 100 ms nInc oming Glare Guard : 1500 ms nOutg oing Glare Guard : No effec t nOutg oing Dial Pulse Rate (PPS): 10 p p s nOutg oing Rotary Dig it Dial Make: 50 ms nOutg oing Rotary Dig it Dial Break: 50 ms nOutg oing Rotary Dial Interd igit: 700 ms nRing Monitor Timer: No effec t nInc oming Seizure: No effec t nOutg oing End -of-Dial: 254 sec nOutg oing Seizure: 200 ms nProg rammed Dial Pause: 5000 ms nDisc onnec t Sig nal Error: 60 sec nEnd -To-End Sig naling Pause: 150 ms (ac c ep t d efault) nEnd -To-End Sig naling Tone: 350 ms (ac c ep t d efault) nFlash Leng th: No effec t nOutg oing Seizure Resp onse: No effec t nPPM : N o nOutp ulsing Make: 50 ms nOutp ulsing Break: 50 ms — Trunk Group Ad ministration Features Sc reen To ad minister Multifreq uenc y Shuttle, selec t the following values: nShuttle: yes nStart Position: 1 nDID Trunks