Lucent Technologies Definity Application Notes For Type Approval Manual

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
363 Russia 
— Trunk Group  Sc reen
nGroup  Typ e: DID
nCountry: 15
nTrunk Gain: hig h
nDirection: incoming
nProtoc ol Typ e: inloc  or intol
nDig it Ab sorp tion List: b lank 
nInc oming  Dial Typ e: rotary
nTrunk Type: loop -start
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Sup ervision: yes
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nDig it Treatment: b lank 
nDig its: b lank 
nExp ec ted  Dig its: d ep end s on system size and  numb ering  
plan
nTerminal Balanc ed : yes 
nDrop  Treatment: silenc e 
nInc oming  Rotary Timeout (sec ): 5 sec  (This field  will not b e 
used  with CPs that c an ac c ept the Inc oming  Partial Dial 
timer. Set this timer from the Ad ministrab le Timers Sc reen.)
— Trunk Features Sc reen
nShuttle: yes
nStart B Sig nal: 1
nReq uest Categ ory: no
— Trunk Group  Ad ministration Sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
trunk timer values for this c ountry:
nInc oming  Rotary Timeout: No effec t
nDisc onnec t Timing : No effec t
nInc oming  Disc onnec t: 100 ms
nInc oming  Dial Guard : 40 ms 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
364 Russia 
nInc oming  Partial Dial: 10 sec
nInc oming  Seizure: No effec t
nInc oming  Inc omplete Dial: 255 sec
nDisc onnec t Sig nal Error: 60 sec
nFlash Leng th: No effec t
nInc oming  Inc omplete Dial Alarm: No effec t
nAnswer Send : 200 ms
nEnd -To-End  Sig naling  Pause: 160 ms (ac c ep t d efaults)
nEnd -To-End  Sig naling  Tone: 360 ms (ac c ep t d efaults)
nTi e  Tru n k s
No information regard ing  Typ e App roval-related  setting s is c urrently 
availab le.
Digital Trunk Administration
Not all p ossib le valid  ad ministrab le c omb inations are listed in this sec tion: Only 
the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and  
Typ e Ap proval stand ard s for eac h c ountry is presented :
nCO Trunks
— DS1 Ad ministration Sc reen 
19
nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protocol: 15 
nInterc onnec t: CO
nCRC?: No
nId le Cod e: 01010100 
— Trunk Group  Ad ministration Sc reen (Timing )
Dig ital trunk timing  values should  b e set as for analog  CO trunks.
nDID Trunks
— DS1 Ad ministration Sc reen
19. DS1 is also analog ous to the term E1 that has b een c oined  for the European T1 or 2 mb it 
interfac e. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
365 Russia 
nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protocol: 15 
nInterc onnec t: CO
nCRC?: No
nId le Cod e: 01010100 
— Trunk Group  Ad ministration Sc reen (Timing )
Dig ital trunk timing  values should  b e set as for analog  DID trunks.
nTi e  Tru n k s
— Non-ISDN Sig naling  Examp le (DS1 Ad ministration Sc reen)
nCirc uit Pac k: TN464D (Not entered  as ad ministrab le item; 
TN464C from up g rad es)
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protocol: 1 
nInterc onnec t: p b x
nCRC?: no
nId le Cod e: 01010100 
— ISDN-PRI (Private Network) Sig naling
This examp le assumes use of US Op tion1 with fac ility assoc iated  
sig naling . Other feature op tions will req uire c hang es in one or more 
ad ministered  items.
nDS1 Ad ministration sc reen
— Circ uit Pac k: TN464D (or TN464C from up g rad es)
— Bit Rate: 2.048
— Interfac e Comp anding : A-law
— Line Cod ing: HDB3
— Sig naling  Mod e: isd n-p ri
— Country Protoc ol: 1 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
366 Russia 
— Connec t: p b x
— Interfac e: user 
—CRC: No
— Id le Cod e: 11111111 
nSignaling Group screen
— Assoc iated Sig naling : Yes
— Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
nTrunk Group  Ad ministration sc reen
— Group Type: isdn-pri
— Servic e Typ e: tie
— ISDN-PRI (Public  Network) (Not availab le for this c ountry. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
367 Saudi Arabia 
Saudi Arabia
Overview
nR2-MFC DID sig naling  is used .
nTh e  PBX s u p p l ie s  D I D  Ba t t e r y.
n600 resistive imp ed anc e is used  on CO trunks.
nRing b ac k tone to network: 425 Hz 1.2/4.65 Cad enc e.
Ta b l e  5 0
 shows the rec ommended  c irc uit p ac ks.
Table 50. Recommended and Available CPs in Saudia Arabia
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC AC-MCC DC-MCC AC-SCC 
DC-SCC AC-CSCC AC-CMC
AC Power Voltag e & Freq 110V/60Hz 220V/50Hz
Ring  Generator 20Hz
Tone Detec tor > TN2182B > TN744D TN748D TN756
Tone Cloc k > TN2182B TN780 TN756
R2MFC Circ uit > TN7444D TN744B
Sp eec h Synthesizer > TN725B 
Call Classifier > TN744D
Announc ement TN750C TN750B 
Analog DID Trunk > TN753
Analog  CO Trunk (No PPM)  > TN747B
Analog  CO Trunk (w/PPM)
4 Wire Tie Trunk > TN760D
2 Wire Tie Trunk
Auxiliary Trunk > TN763D TN763C
Dig ital CO/DID Trunk > TN464F 
Dig ital Tie Trunk > TN464F TN464E TN464D TN464C TN464B
Dig ital PRI CO Trunk n/a 
Dig ital BRI Trunk
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
368 Saudi Arabia 
NOTE:
A-law c ompand ing  is the national stand ard  in Saud i Arab ia. 
However, Mu-law is used  internally to the system for servic e c irc uits 
and  analog lines. Network interfac es are c onfig ured  as A-law if 
req uired .
Feature Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nARS/AAR Ad ministration 
To enab le ARS administration, on the System-Parameters 
Customer-Op tions sc reen, set the ARS
 field  to y
. You also should check all 
ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: Dig ital Converter PRI-DASS
Dig ital Converter PRI-DPNSS
Dig ital Converter PRI-BRI   
8 Port Analog  Line TN742
16 Port Analog  Line > TN746B
24 Port Analog  Line n/a
4 Wire Digital Line > TN754B 
2 Wire Digital Line TN#2224 > TN2181 
Data Line > TN726B 
BRI-U Line
BRI-ST Line
fnp a: North Americ an numb ers with an area c od e.
hnp a: North Americ an numb ers without an area c od e.
svc : North Americ an numb ers of the screen ‘‘x11’’.
Ta b l e  5 0 .Recommended and Available CPs in Saudia Arabia — Continued
Equipment Equipment Type
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
369 Saudi Arabia 
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a:
System Parameter Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nFeature-Related System Parameters Ad ministration
— Trunk-to-Trunk Transfer: Permitted  b y c ountry’s reg ulations - 
Selec tion is c ustomer’s c hoic e.
— Pub lic  Network Trunks on Conferenc e Call: 5
— Conferenc e Parties With PNTs: 6
— Conferenc e Parties Without PNTs: 6
— Line Interc ep t Tone Timer: 30
— Nig ht Servic e Disc onnec t Timer: 180 sec
— Short Interd ig it Timer: 3 sec
— Unanswered  DID Call Timer: 60 
—Auto-Hold: Yes 
20
— Attend ant Tone: Yes
— Bridg ing  Tone: No
— Conferenc e Tone: No
— Intrusion Tone: Yes
— Rep etitive Call Waiting Tone: No
— DID Busy Treatment: Attend ant
— Pull Transfer: No
— Level of Tone Detec tion: Broad b and
— Outp ulse Without Tone: Yes int: For all international numbers.
natl: For all national PN numb ers.
pubu: For all other external (that is, not extensions) numbers.
20. Althoug h not a Type App roval issue, this rep resents the convention for this country. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
370 Saudi Arabia 
— (Station-to-switc h) Rec all Timing :
nFlashhook Interval: Yes 
nUp p er Bound : 1000 ms 
nLower Bound : 200 ms 
nSystem Parameter Multifreq uenc y Sig naling  Ad ministration
— Incoming Call Type: group-ii-mfc
— Test Call Extension: As neg otiated
— Inc oming  Interd ig it Timer: 10 sec
— Inc oming  Sig nal Types:
nCountry Op tions Parameters
— Comp and ing  Mode: mu-law
NOTE:
Comp and ing  Mod e: A-law is the national stand ard . Mu-law is 
used  internal to the system for servic e c irc uits and  analog  
lines. Network interfac es are c onfig ured  as A-law if req uired .
— Base Tone Generation Set: 9
— Tone Detec tion Mod e: d efaultGROUP-I GROUP-II GROUP-A GROUP-B
11: d rop
12: ig nored
13: maint-c all 
14: ig nore
15: ig nore1: normal
2: b usy-rt-attd
3: normal
4: normal
5: b usy-rt-attd
6: d ata-c all
7: normal
8: d ata-c all
9: b usy-rt-attd
10: b usy-rt-attd
11: normal
12: b usy-rt-attd
13: normal
14: b usy-rt-attd
15: normalUse d efaults 3: b usy
4: c ong estion
5: interc ep t
6: free 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
371 Saudi Arabia 
— Interdigit Pause: default
— Dig ital Loss Plan: 9
— Analog Ringing Cadence: 9
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nCountry: 9
nTrunk Gain: hig h
nDirec tion: two-way 
nDig it Ab sorp tion List: b lank 
nPre f i x -1 :  N o
nTrunk Type: loop -start 
nOutg oing  Dial Typ e: tone 
nTrunk Termination: rc  (c omp lex imp ed anc e)
nAuto Guard : no 
nDial Ac c ess: Yes
nCall Still Held : no 
nTerminal Balanc ed : yes 
nRec eive Answer Sup ervision: no 
nAnswer Supervision Timeout: 10 (This sets both the CP 
firmware timer and  software timer. Set to 0 for any trunk that 
will rec eive answer sup ervision.)
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
choice.
nDisc onnec t Timing : 500 ms (This field  will not be used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
— Trunk Group  Ad ministration Sc reen (Timing ) 
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 500 ms 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
372 Saudi Arabia 
nOutg oing  Disc onnec t: 500 ms
nOutg oing  Dial Guard : 1600 ms 
nInc oming  Glare Guard : 1500 ms 
nOutg oing  Glare Guard : 1500 ms 
nOutg oing  Dial Pulse Rate (PPS): 10 p p s
nOutg oing  Rotary Dig it Dial Make: 35 ms
nOutg oing  Rotary Dig it Dial Break: 65 ms
nOutg oing  Rotary Dial Interd igit: 800 ms
nRing  Monitor Timer: 5200 ms
nInc oming  Seizure: 500 ms
nOutg oing  End -of-Dial: 10 sec
nOutg oing  Seizure Resp onse: 240 sec
nProg rammed  Dial Pause: 1500 ms
nDisc onnec t Sig nal Error: 240 sec
nFlash Leng th: 100 ms
nPPM :  n o
nDID Trunks
— Trunk Group  Sc reen
nGroup  Typ e: DID
nCountry: 9
nTrunk Gain: hig h
nDig it Ab sorp tion List: b lank 
nInc oming  Dial Typ e: MF
nTrunk Type: immed -start
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Sup ervision: no
nDisc onnec t Timing : 500 ms (This field  will not be used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nDig it Treatment: b lank 
nDig its: b lank 
nTerminal Balanc ed : yes 
nExtend ed  Loop  Range: (Used  Only with TN459) no