Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 6 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 6 Instructions Manual

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Release 6 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

Page 283 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-9 Busyout and Release Commands
8
tests require that the object be released to complete. A WARNING alarm with
error type 18 is logged against each busied out object. All busied out MOs can
be displayed by entering error type 18 in the Error Type field on the Hardware
Errors Report Form (see display errors). The matching release command
returns the...

Page 284 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-10 Common Abort and Fail Codes
8
Common Abort and Fail Codes
Table 8-3 lists common error codes associated with abort and fail results for
busyout, release, test, and reset commands. In addition to these, many
maintenance objects have other unique error codes.
Table 8-3. Common Error Codes for Busyout, Release, Test,
and Reset Commands
Error...

Page 285 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-11 Common Abort and Fail Codes
8
1338 ABORT The system could not execute the command on a component on
the Standby SPE because an interchange was pending.
1. Refer to ‘‘
STBY-SPE (Standby SPE Maintenance)’’ in Chapter
9.
2. Try the command again after the SPE interchange occurs.
1339 ABORT The system could not execute the command on a component on
the...

Page 286 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-12 Common Abort and Fail Codes
8
62524
62525
62526ABORT Maintenance is currently active on the maximum number of
maintenance objects that the system can support. This condition
is commonly caused by the fact that the system contains a large
number of stations or trunks that have been administered, and
whose circuit packs are installed, but which are...

Page 287 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-13 Alarm and Error Categories
8
Alarm and Error Categories
The display alarms and display errors commands allow you to generate
reports for certain groups of maintenance objects. By entering a category from
the Table 8-4
into the Category field of the input form, you can restrict the report
to only those maintenance objects included in that category....

Page 288 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-14 Alarm and Error Categories
8
detectorDTMR-PT
DETR-BD
GPTD-PT
TONE-BD
dup-speCARR-POW
DUPINT
MEM-BD
PROCR
SPE-SELEC
STBY-SPE
SW-CTL
TAPE
environAC-POWER
CABINET
CARR-POW
DC-POWER
EMG-XFER
EXT-DEV
POWER
RING-GEN
exp-intfAC-POWER
CARR-POW
DC-POWER
DUPINT
EPN-SNTY
EXP-INTF
MAINT
SYNC
Table 8-4. Alarm and Error Categories — Continued
Category Maintenance...

Page 289 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-15 Alarm and Error Categories
8
TDM-CLK
TONE-BD
ext-devCUST-ALM
generatrSTRAT-3
SYNC
TDM-CLK
TONE-PT
TONE-BD
inads-linkINADS
infcEXP-INTF
ISDN-LNK
ISDN-SGRP
PGATE-BD
X25-PT
maintMAINT
mass-stDISK
H-ADAPTR
STO-DATA
TAPE
mbusDUPINT
MEM-BD
PROCR
SW-CTL
TAPE
memoryMEM-BD
Table 8-4. Alarm and Error Categories — Continued
Category Maintenance Objects
Continued...

Page 290 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-16 Alarm and Error Categories
8
miscCONFIG
ERR-LOG
MIS
PROC-SAN
SYSTEM
TIME-DAY
mmiMMI-BD
MMI-LEV
MMI--PT
MMI-SYNC
mnt-testM/T-ANL
M/T-BD
M/T-DIG
M/T-PKT
modemMODEM-BD
MODEM-PT
mssnetH-ADAPTR
SW-CTL
netconSW-CTL
pktM/T-PKT
PKT-BUS
pms/jrnlJNL-PRNT
PMS-LINK
pncDS1C-BD
DS1-FAC
EXP-INTF
FIBER-LK
PNC-DUP
Table 8-4. Alarm and Error Categories — Continued...

Page 291 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-17 Alarm and Error Categories
8
SN-CONF
SNC-BD
SNC-LINK
SNC-REF
SNI-BD
SNI-PEER
pncmaintDS1C-BD
DS1-FAC
EXP-INTF
FIBER-LK
PNC-DUP
SN-CONF
SNC-BD
SNC-LINK
SNC-REF
SNI-BD
pnc-peerSNI-PEER
procrPROCR
quick-stABRI-PT
ADXDP-PT
ANL-16-LINE
ANL-LINE
ANL-NE-LINE
ANN-PT
ANNOUNCE
ASAI-ADJ
AUDIX-PT
AUX-TRK
Table 8-4. Alarm and Error Categories — Continued
Category...

Page 292 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-18 Alarm and Error Categories
8
BRI-PT
BRI-SET
CDR-LINK
CLSFY-PT
CO-DS1
CO-TRK
CONFIG
DAT-LINE
DID-DS1
DID-TRK
DIG-LINE
DIOD-TRK
DISK
DS1-FAC
DS1C-BD
DTMR-PT
EPN-SANITY
EXP-INTF
EXP-PN
FIBER-LNK
GPTD-PT
HYB-LINE
ISDN-LNK
ISDN-TRK
JNL-PRNT
MAINT
MEM-BD
MET-LINE
Table 8-4. Alarm and Error Categories — Continued
Category Maintenance Objects
Continued on next...

Page 293 DEFINITY Enterprise Communications Server Release 6
Maintenance for R6r Volumes 1 & 2 555-230-126 Issue 2
January 1998
Maintenance Commands
Page 8-19 Alarm and Error Categories
8
MODEM-PT
OPS-LINE
PDATA-PT
PDMODULE
PGATE-PT
PKT-BUS
PKT-INT
PMS-LINK
PMS-PRNT
PNC-DUP
PRI-CDR
PROCR
S-SYN-PT
SEC-CDR
SN-CONF
SNC-BD
SNC-LNK
SNC-REF
SNI-BD
SNI-PEER
SW-CNTL
SYS-PRNT
SYSAM
SYSLINK
SYSTEM
TAPE
TDM-BUS
TDM-CLK
Table 8-4. Alarm and Error Categories — Continued
Category Maintenance Objects
Continued on next page

View all the pages

All Lucent Technologies manuals Comments (0)

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 6 Instructions Manual