Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual

SUPERSET 3DN Set Information
SPEAKER.
HANDSET
l--+-E-
IVOI ”VOI Amutespeake,r
---52program
redial
KAO463EOROMICROPHONELINE
-APPEARANCE
KEYSFigure 2-2 
SUPERSET 3DN Faceplate Layout
Page 5 

SECTION MITL9109-094-108-NAPage 6 

SUPERSET 3DN Set Information
3. PHYSICAL DESCRIPTION
General
3.01The SUPERSET 3DN telephone dimensions are:
length 240 mm (9.45 in.)
width 155 mm (6.10 in.)
height 106 mm (4.17 in.).
3.02The faceplate of the set is divided into four functional areas:
lhandset, speaker and microphone
lline appearance keys, each with a status indicator
0fixed function keys
ltelephone keypad
Handset, Speaker and Microphone
3.03The handset mounts in a cradle on the left side of the set; the
speaker is located beneath a...

SECTION MITLSI 09-094-l 08-NA
Page 8 

SUPERSET 3DN Set Information
4. FUNCTIONAL DESCRIPTION
Fixed Function Keys
4.01Surrounding the dial pad are ten fixed function keys; their func-
tions are as follows:
HOLD Key: Pressing the red HOLD key places the current call on hard
hold. The call may be retrieved by pressing the appropriate line select
key.VOLUME UP and DOWN Keys: These keys are used to set levels for:
ringing volume, ringing pitch, handsfree volume, and background mu-
sic volume. Each key depression changes the volume level or pitch...

SECTION MITL9109-094-108-NAand returns dial tone. The user dials another number. Hanging up at
this point transfers the held party to the dialed number. Pressing the
TRANS/CONF key again when the called party answers reconnects the
held party, forming a conference.
REDIAL Key: This key allows single keystroke redialing of the last
correct internal or external number entered from this set. This key can
be used only if manual dialing has not been initiated.
MESSAGE Key and LED: The MESSAGE LED flashes...

SUPERSET 3DN Set Information
Trade Calls (Swap) 
- the user can alternate between two calls, having
one on hold and being in conversation with the other.
4.07The CDE-programmable feature keys which provide LCD indica-
tion include:
Auto Answer 
- the set rings once and then automatically answers the
call by switching into handsfree mode.
CalVAttn -used to originate a data call (connects the user to the
DTRX). Refer to Section 
MITLSI 09-094- 105-NA, Features Description
for more information.
Data Disc
-...

SECTION MITL9109-094-108-NAPage 12 

SUPERSET 3DN Set Information
5. TELEPHONE OPERATION
General
5.01This Part describes basic telephone call handling. Part 6 de-
scribes additional features available with the SUPERSEJ 3DN
telephone.
Originating Calls
5.02To originate a call:
Pick up the handset,
or,
Press the SPEAKER key. The set selects the prime line. If the prime line
is busy, the set selects the first available outgoing line, starting from
the lowest line appearance key. If no line is available, the set remains
silent.
or
Proceed to...

SECTION MITL9109-094-108-NAor
Press the CANCEL key. If the set 
is in handsfree mode, it returns to the
idle state; if the handset is in use, the set returns dial tone. If the set
has a call on consultation hold, this call is reconnected.
5.05When one party hangs up, the remaining party returns to the
idle state if in handsfree mode; if off-hook, the party returns to
silence or dial tone, depending on system options.
Call Transfer/Conferencing
5.06Press the TRANSKONF key. This places the current call on...