Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual

							MlTEL STANDARD PRACTICESECTION MITL9199-094-904-NAIssue 1, April 1988
SX-200” DIGITAL
PRIVATE AUTOMATIC BRANCH EXCHANGE (PABX)
CONTROL SHEET 
- VOLUME 4 (PN 9109-094-004-NA)PERIPHERALS INFORMATION
CONTENTS 
- THIS VOLUME
Section Number
MITLS 109-094-004-NA
MITL9109-094-106-NAMITLS 
109-094- 107-NA
MITL9109-094-108-NA
MITLS 109-094- 109-NA
MITLS 109-094- 125NA
MITL9109-094-315-NA
MITLS 141-753-503-NA
MITLS 141-753-506-NA
MITL9141-753-525-NA
MITL9141-753-526-NA
MITL9141-753-528-NATitle
Volume 4 Index
SUPERSET 3TM Telephone Description
SUPERSET 4@’ Telephone Information
SUPERSET 3TMDN Set Information
SUPERSET 4TMDN Telephone Information
Circuit Card Descriptions
Attendant Console Description
DATASET 1100 Series
DATASET 2100 Series
DATACABINET 9000
DATASHELF 9 100
Modem Interconnect PanelIssue
Issue 1
Issue 1
Issue 1
Issue 1
‘Issue 1
Issue 1
Issue 1
Issue 3
Issue 1
Issue 3
Issue 3
Issue 1
CONTENTS 
- OTHER VOLUMES
Volume 1GENERAL DESCRIPTION (PN 9109-094-001 -NA)
Section NumberTitle
MITL9109-094-OOI-NAVolume 1 Index
MITLS 109-094-OOO-NADocumentation Index
MITL9109-094-IOO-NAGeneral Description
MITLS’I 09-094- 105-NAFeatures Description
MITLS 109-094-220-NAAutomatic Route Selection and Toll Control
MITL9109-094-221-NAStation Message Detail Recording
MITLS 
109-094-230-NATenanting
MITLS 109-094-450-NATraffic Measurement
MITL9109-094-620-NAACD TelemarketerTM Application Package
Volume 2INSTALLATION AND CUSTOMER DATA ENTRY (PN 
9109-094-002-NA)Section NumberTitle
MITLSI 09-094-002-NAVolume 2 Index
MITL9109-094-200-NA Installation
MlTL9109-094-206-NA Installation Forms
MITLS 109-094-210-NACustomer Data Entry (CDE)
MITL9109-094-320-NA System Test Procedures
Volume 3ENGINEERING, MAINTENANCE and TROUBLESHOOTING- (PN 
9109-094-003-NA)Section NumberTitle
MITL9109-094-003-NA Volume 3 index
MITL9109-094-180-NA Engineering Information
MITL9109-094-350-NA Troubleshooting
MITL9109-094-351-NA RS-232 Maintenance Terminal
MITLS 
109-094-353-NAGeneral Maintenance Information
MITL9109-094-355-NA Field-Replaceable Units
@Copyright 1988, MITEL Corporation. All rights reserved.
@Registered Trademark of MITEL Corporation
T”Trademark of MITEL Corporation 
						

							MITEL STANDARD PRACTICESECTION MITL9109-094-106-NAIssue 1, April 1988
SX-200” DIGITAL
PRIVATE AUTOMATIC BRANCH EXCHANGE
SUPERSET 3TM TELEPHONE DESCRIPTION
@Copyright 1988, MITEL Corporation. All rights reserved.
T”Trademark of MITEL Corporation
@Registered Trademark of MITEL Corporation 
						

							SECTION MITL9109-094-106-NANOTICE
The information contained in this document is believed to be accurate in all respects but is
not warranted by 
Mite1 Corporation (MITEL). The information is subject to change without
notice and should not be construed in any way as a commitment by 
Mite1 or any of its
affiliates or subsidiaries. 
Mite1 and its affiliates and subsidiaries assume no responsibility
for any errors or omissions in this document. Revisions of this document or new editions of
it may be issued to incorporate such changes. 
						

							SUPERSET 3 Telephone Description
CONTENTS
1. INTRODUCTION
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Reason for Issue . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. DESCRIPTION
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. FUNCTIONAL DESCRIPTION
General.............................................
5Line Select Keys.......................................
5Line Status 
LEDs......................................5Speed Dial Keys.......................................
5Hold Key............................................
5Feature Keys.........................................
5Speaker Volume........................................
6Ringer Volume and Ringer Pitch...........................
64. SHIPPING AND RECEIVING
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Delivery Check . . . . . . . . . . . . . . . . . . , . . . . . , . . . . . . . . . . . . . . . . 9
5. INSTALLATION
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. TEST PROCEDURES
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , 13
LIST OF ILLUSTRATIONS
FIGURETITLE
PAGE3-l
SUPERSET 31M Electronic Telephone Set............73-2
SUPERSET 3 Telephone Face Layout...............8 
						

							SECTION MITL9109-094-106-NA
iv 
						

							SUPERSET 3 Telephone Description
1. INTRODUCTION
General
1 .OlThis Section describes the physical and electrical characteris-
tics of the 
SUPERSET 3TM electronic telephone set. An outline of
installation procedures, set operation and maintenance is also in-
cluded.
Reason for Issue
1.02This Section is issued to provide information about the 
SUPER-SET 3 telephone.
Page 1 
						

							SECTION MITL9109-094-106-NAPage 2 
						

							SUPERSET 3 Telephone Description
2. DESCRIPTION
General
2.01The SUPERSEJ 3 telephone is a microprocessor-controlled
electronic telephone set employing integrated circuitry. Oper-
ational features include, single key activation, handsfree operation, 12
user-programmed Speed dial keys and automatic selection of the
Prime Line. Up to three lines can appear on the SUPERSEJ 3 telephone.
Line appearances can be lines, trunks, or multiple appearances of the
same line.
2.02The SUPERSEJ 3 telephone is connected to local area wiring by
a modular jack. Power, signal, and voice are carried over a
single pair of wires.
Physical
2.03The SUPERSEJ 3 telephone consists of the main assembly, the
handset cord, the handset, and the line cord.
2.04The microphone (for handsfree operation), is located behind an
aperture on the front of the main assembly.
2.05The speaker is located between the handset recesses. The
speaker volume control is mounted on the left side of the cover
assembly.
Page 3 
						

							SECTION MITLSI 09-094-106-NAPage 4 
						

							SUPERSET 3 Telephone Description
3. FUNCTIONAL DESCRIPTION
General
3.01Figure 3-1 shows the SUPERSET 3 Electronic Telephone Set;
the face layout is shown in Figure 3-2. A description of the
function of each key and display follows. All keys are noninterlocking.
Line Select Keys
3.02 During CDE, the three Line Select keys are programmed to
access lines and/or trunks. The leftmost key will access the
set’s Prime Line. The remaining two keys are available for use as
Speed Dial keys, if they have not been assigned as line appearances.
Line Status 
LEDs3.03Above each Line Select key there is an associated Line Status
LED. The LED lights continuously to indicate the line is in use; it
flashes to indicate a call is on hold at that line.
Speed Dial Keys
3.04There are 12 Speed Dial keys located on the upper right portion
of the set. The user can program these keys with 
frequently-dialed numbers.
Hold Key
3.05The red Hold key allows the user to place any call at the set on
hold. The Line Status LED associated with the held line, flashes
to remind the user that a call is on hold. The call is retrieved by
pressing the Line Select key.
Feature Keys
3.06Each of the seven Feature keys are associated with a specific
feature. They are as follows:
SWAP 
- The SWAP key allows the user to alternate between two
established calls (a Broker’s Call).
TRANS/CONF 
- This key allows the user to put a call on hold, dial a
new 
nu-mber and conference the call or transfer the held call (with
privacy) to the new number.
REDIAL - This key causes the last number dialed to be automatically
redialed when the key is pressed.
CANCEL 
- This key cancels any dialing which had been performed.
PROGRAM/SAVE 
- This key allows the user to program and save
Page 5