Mitel Sx 200 El/ml Technicians Handbook

							Installation
161
Installation
Cabinet Card Assignments
SX-200 EL Control Cabinet Card Assignments
Figure 19:  SX-200 EL Control Cabinet Card Assignments 
						

							Technician’s Handbook
162
SX-200 EL Peripheral Cabinet Card Assignments
NOTE:On the BCC III faceplate, a CIM uses only one of the connections; the FIM II 
uses two. 
Figure 20:  SX-200 EL Peripheral Cabinet Card Assignments 
						

							Installation
163
Installation
SX-200 ML (RM) Cabinet Card Assignments 
NOTE:On the BCC III faceplate, a CIM uses only one of the connections; the FIM II 
uses two. 
Figure 21:  SX-200 ML (RM) Cabinets with BCC III Cards 
						

							Technician’s Handbook
164
Figure 22:  SX-200 ML (RM) Cabinets with BCC II Cards 
Figure 23:  SX-200 ML (RM) Cabinet with a PRI Card 
						

							Installation
165
Installation
SX-200 ML (FD) Cabinet Card Assignment
Figure 24:  SX-200 ML (FD) Cabinet Card Assignment 
						

							Technician’s Handbook
166
SX-200 LIGHT Cabinet Card Assignment
Figure 25:  SX-200 LIGHT Cabinet Card Assignment 
						

							Installation
167
Installation
SX-200 SPINE Peripheral Bay Module Assignment
Figure 26:  SX-200 SPINE Peripheral Bay Module Assignment
SX-200 SPINE Configuration Rules
Allowable combinations of ONS modules with DNIC or LS/CLASS 
modules on each SPINE are described in the following table. 
Table 26:  SX-200 SPINE Configuration Rules
ONS Modules installed in 
SPINE A or SPINE BDNIC and/or LS/CLASS Modules Allowed
SPINE ASPINE B
066
145
224
303 
						

							Technician’s Handbook
168
SX-200 Digital 672-Port Cabinet Card Assignment
Figure 27:  SX-200 Digital 672-Port Cabinet Card Assignment 
						

							Installation
169
Installation
SX-200 Digital 336-Port Control Cabinet
Card Assignment
Figure 28:  SX-200 Digital 336-Port Control Cabinet Card 
Assignment 
						

							Technician’s Handbook
170
SX-200 Digital 456-Port Cabinet Card Assignment
Figure 29:  SX-200 Digital 456-Port Cabinet Card Assignment