Motorola Astro Radio Software 68 81098e85 O Manual
Have a look at the manual Motorola Astro Radio Software 68 81098e85 O Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
129 Note: Do NOT duplicate a function on multiple controls (on a button and a switch, or a button and a menu, or a switch and a menu for instance). This may cause the radio to malfunction and may confuse the operator. Function Key Descriptions F2 - HHCH BUTTONS (Hand-Held Control Head Button)This screen can be accessed for ASTRO SABER Portables only. Brings up a screen where the functionality of each HHCH button is defined. Field Definitions Conventional Button Function Description Blank This button is not assigned to any feature of the radio (Rotary only) Call Alert Used to switch the radio into the appropriate mode for sending out a page. For the radio to function properly, this feature must also be enabled on the ASTRO CONVENTIONAL PERSONALITY OPTIONS screen (F4/F6/F3/F9/F6). If MDC mode operation is required, this feature must be enabled on the MDC OPTIONS screen (F4/F6/F3/F7). Call Response Used to respond to a Private Call, or Call Alert, or Phone Call. This function should be used for Response Only radios, or in conjunction with the Phone /Private Call functions assigned to the radio menu. Channel/Select Used to change channels (Rotary only). Dynamic Priority Used to increase the priority of the current active channel. Emergency Used to activate an Emergency transmission. (Not available on all modes.) For the radio to function properly, this feature must also be enabled on the MDC SYSTEM screen (F4/F6/F4/F3). Light Used to toggle the display light on/off. Message Used to activate the Message feature. Monitor Used to unsquelch the radio when the button is pressed, allowing the user to listen to activity on the channel. Nuisance Delete Used to remove the current active channel from the list. Phone Used to enable the DTMF Encoder. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Rptr Acc Button 1 Used to manually send a repeater access request code. Rptr Acc Button 2 Used to manually send a repeater access request code. Scan Used to enable/disable Scan. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Select Call Used to switches the radio into the appropriate mode to send out a Selective Call. For the radio to function properly, this feature must also be enabled on the ASTRO CONVENTIONAL PERSONALITY OPTIONS screen (F4/F6/F3/F9/F6). If MDC mode operation is required, this feature must be enabled on the MDC OPTIONS screen (F4/F6/F3/F7). Status Activates the Status feature.
130 Trunking Talkaround Direct Enables/Disables talkaround for transmit. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Talkgroup Used to switch from preset to any Talkgroup from the Personality’s Conventional Talkgroup list. When a Talkgroup is selected, all personalities using that list will also switch to that Talkgroup (CAI only option) Unprogrammed This button is not assigned to any feature of the radio. A bad key chirp tone will sound. Volume Set Tone Generates a tone for the duration of the press. Zone Select Changes Zones (Rotary only). Button Function Description Blank This button is not assigned to any feature of the radio (Rotary only) Call Response Used to respond to a Private Call, or Call Alert, or Phone Call. This function should be used for Response Only radios, or in conjunction with the Phone /Private Call functions assigned to the radio menu. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Channel/Select Used to change channels or subfleets (Rotary only). Emergency Used to activate an Emergency transmission. (Not available on all models.) For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Light Used to toggle the display light on/off. Message Used to activate the Message feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Nuisance Delete Used to remove the current active channel from the list. One Touch X Activates the One Touch feature programmed for the selected button. For the radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM OPTIONS screen (F4/F4/F3/F9). Page Used to enable the Call Alert feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Phone Used to answer or initiate a Phone Call. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Private Call Enables the Private Call feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Reprogram Request Used to enable the Reprogram Request feature which transmits a Trunking reprogram request. Scan Used to enable/disable Scan. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4).
131 Site Lock/Unlock Enables/Disables site automatic site changes for AMSS or SmartZone operation. For radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM screen (F4/F4/F3). Site Display/Srch Displays the current site or enables a site search for AMSS or SmartZone operation. For radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM screen (F4/F4/F3). Status Used to activate the Status feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Unprogrammed No radio feature has been assigned to this button. A bad key chirp tone will sound. Volume Set Tone Generates a tone for the duration of the press. Zone/Select Changes Zones (Rotary only).
132
Hand-Held Control
Button
Configuration
(ASTRO SABER
Portables Only)At the MAIN MENU, press F4, F3 twice and then F2 twice to access this
screen.
ASTRO SABER Portables Only
Models II and III ASTRO SABER Portables can be equipped with an optional
Hand Held Control Head. This screen allows you to modify the function
performed by Hand-Held Control Head (HHCH) buttons. A button
may be configured to perform different Conventional and Trunking
operations. However, commonality is strongly urged for features
available and desired in both operations.
Use the UP/DOWN arrow keys to select the function of the currently
highlighted button for Trunking operation. Depending on your radio
version and model number, it will be possible to choose from all or
some of the functions listed on the following page.
Note: Hand-Held Control Head button features may be defined
independent of the actual radio button configurations. This will NOT
adversely affect the radio since it is equipped to correctly
support both sets of buttons simultaneously.
Note: Do NOT duplicate a function on multiple controls (on a
button and a switch, or a button and a menu, or a switch and a
menu for instance). This may cause the radio to malfunction
and may confuse the operator.
DCCBB
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO PORTABLE Model:
...FEATURES:BUTTONS:HHCH BUTTONS
HAND HELD CONTROL HEAD BUTTON CONFIGURATION
-------------------------------------------
Button Conventional Trunking
------------------ ----------------- ------------
Top Button Left Unprogrammed Unprogrammed
Top Button Middle Unprogrammed Unprogrammed
Top Button Right Unprogrammed Unprogrammed
Side Button 1 (Top) Unprogrammed Unprogrammed
Side Button 2 Unprogrammed Unprogrammed
Side Button 3 Unprogrammed Unprogrammed
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
133 Field Definitions Conventional Button FunctionDescription Call Alert Switches the radio into the mode required to dispatch out a page. For the radio to function properly, this feature must also be enabled on the ASTRO CONVENTIONAL PERSONALITY OPTIONS screen (F4/F6/F3/F9/F6). If MDC mode operation is required, this feature must be enabled on the MDC OPTIONS screen (F4/F6/F3/-Set Signalling=MDC/F7). Call Response Used to respond to a Private Call, or Call Alert, or Phone Call. This function should be used for Response Only radios, or in conjunction with the Phone/Private Call functions assigned to the radio menu. Dynamic Priority Used to increase the priority of the current active channel. Emergency Used to activate an Emergency transmission. (Not available on all models.) For the radio to function properly, this feature must also be enabled on the MDC SYSTEM screen (F4/F6/F4/F3). Keypad Lock Locks up the radio keypad. Light Used to switch on the display light. Message Used to activate the Message feature. Monitor The radio will unsquelch when the button is pressed, allowing you to listen to activity on the channel. Nuisance Delete Used to remove the current active channel from the list. One Touch X Activates the One Touch feature programmed for the selected button. For the radio to function properly, this feature must also be enabled and configured on the CONVENTIONAL RADIO WIDE OPTIONS screen (F4/F6/F2). Phone Enables the DTMF Encoder. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Rab X Used to manually send a Repeater Access request code. Scan Used to enable/disable Scan. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Select Call Switches the radio into the mode required to dispatch a Selective Call. For the radio to function properly, this feature must also be enabled on the ASTRO CONVENTIONAL PERSONALITY OPTIONS screen (F4/F6/F3/F9/F6). If MDC mode operation is required, this feature must be enabled on the MDC OPTIONS screen (F4/F6/F3-Set Signalling=MDC/F7). Status Used to activate the Status feature. Talkaround/Direct Used to enable/disable Talkaround for transmit. For the radio to function properly, this feature must also be enabled on the CONVENTIONAL PERSONALITY screen (F4/F6/F3). Talkgroup Used to switch from preset to any Talkgroup from the Personality’s Conventional Talkgroup list. When a Talkgroup is selected, all personalities using that list will also switch to that Talkgroup (CAI only option)
134 Trunking Unprogrammed No radio feature is assigned to this button. A bad key chirp tone will sound. Volume Set Tone Generates a tone for the duration of the press. Button Function Description Call Response Used to respond to a Private Call, or Call Alert, or phone call. This function should be used for Response Only radios, or in conjunction with the Phone/Private Call functions assigned to the radio menu. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Emergency Used to activate an Emergency transmission. (Not available on all models.) For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Keypad Lock Locks up the radio keypad. Light Turns on the display light. Message Used to activate the Message feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Nuisance Delete Used to remove the current active channel from the list. One Touch X Activates the One Touch feature programmed for the selected button. For the radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM OPTIONS screen (F4/F4/F3/F9). Page Enables the Call Alert feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Phone Used to answer or initiate a Phone Call. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Private Call Enables the Private Call feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4). Reprogram Req Enables the Reprogram Request feature which transmits a Trunking reprogram request. Scan Used to enable/disable Scan. For the radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM screen (F4/F4/F3). Site Display/Srch Displays the current Site or enables a Site search for AMSS or SmartZone operation. For the radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM screen (F4/F4/F3). Site Lock/Unlock Enables/Disables Site automatic site changes for AMSS or SmartZone operation. For the radio to function properly, this feature must also be enabled on the TRUNKING SYSTEM screen (F4/F4/F3). Status Activates the Status feature. For the radio to function properly, this feature must also be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4).
135 Unprogrammed No radio feature is assigned to this button. A bad key chirp tone will sound. Volume Set Tone Generates a tone for the duration of the press.
136
Radio Wide Switch
Configuration
(Portables Only)At the MAIN MENU, press F4 and then F3 three times to access this
screen.
ASTRO SABER Portables Only
ASTRO XTS 3000 Portables Only
This screen allows you to modify the function performed by the radio
control switches, which include the top Two-Position Concentric
switch and the Concentric Rocker Switch. Depending on the radio
version and model, you will be able to choose from all or some of the
functions listed on the following pages.
Note: Do NOT duplicate a function on multiple controls (on a
button and a switch, or a button and a menu, or a switch and a
menu for instance). This may cause the radio to malfunction
and may confuse the operator.
DCCC
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO PORTABLE Model:
...FEATURES:SWITCHES
RADIO WIDE SWITCH CONFIGURATION
-------------------------------
Switch Labels Conventional Feature Trunking Features
------------- -------------------- -----------------
Two Position Concentric(A/B)
Position A Blank Blank
Position B Scan Scan
Concentric Rocker Switch
Position 1 Clear Tx Select Clear Tx Select
Position 2 Secure Tx Select Secure Tx Select
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO PORTABLE Model:
...FEATURES:SWITCHES
RADIO WIDE SWITCH CONFIGURATION
-------------------------------
Switch Labels Conventional Feature Trunking Features
------------- -------------------- -----------------
Two Position Concentric
Position A Secure Tx Select Secure Tx Select
Position B Clear Tx Select Clear Tx Select
Three Position Toggle
Position A Blank Blank
Position B Blank Blank
Position C Blank Blank
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
137 Press Ta b to select the desired field, or press the desired function key (F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to scroll through all the available options. Field Definitions Two Position Concentric - Position A This switch is applicable to both Conventional and Trunking operation. Use the UP/DOWN arrow keys to make your selection. This field determines the function of the Two-Position Concentric Switch when it is in the position marked by an “Ø” symbol on ASTRO XTS 3000 models, OR by an “A” symbol on ASTRO SABER models. Two Position Concentric - Position BThis switch is applicable to both Conventional and Trunking operation. Use the UP/DOWN arrow keys to make your selection. This field determines the function of the Two-Position Concentric Switch when it is in the position marked by an “O” symbol on ASTRO XTS 3000 models, OR by a “B” symbol on ASTRO SABER models. Note: For Secure-equipped ASTRO XTS 3000 models, this position “O” is fixed as “Clear Tx Select” when position “Ø” is set to “Secure Tx Select”. Concentric Rocker Switch - Position 1This field will be visible for ASTRO SABER radios only. This switch is applicable to both Conventional and Trunking operation. Use the UP/ DOWN arrow keys to make your selection. This field determines the function of the Concentric Rocker Switch when it is in the position marked with “O”. Note: For Secure-equipped radios, position “O” is fixed and defined as “Clear Tx Select” when position “Ø” is set to “Secure Tx Select”. Concentric Rocker Switch - Position 2This field will be visible for ASTRO SABER radios only. This switch is applicable to both Conventional and Trunking operation. Use the UP/ DOWN arrow keys to make your selection. This field determines the function of the Concentric Rocker Switch when it is in the position marked with “Ø”. Three Position Toggle SwitchThis field will be visible for ASTRO XTS 3000 radios only and has three programmable positions. Use the UP/DOWN arrow keys to select the function for each of the positions on the Three-Position Toggle Switch located on top of the radio.
138 Two-Position Concentric Switch OptionsDepending on your radio version and model, you will be able to choose from the possible options for position A of the Two-Position Concentric Switch located on top of the radio: Button FunctionDescription Blank No function. No tone will sound. Use Blank for Off; ex: A = Scan (On), B = Blank (Off). Channel Select Select or Change Channels. This function must be assigned for BOTH Conventional and Trunking operations if applicable), and for BOTH positions of this switch. Secure Tx Select Enables Secure transmissions. This feature must also be configured on the CONVENTIONAL PERSONALITY screen (F4/F6/ F3). The radio must be equipped with a Secure encryption module for this feature to work. For Trunked radios, this feature must also be configured on the TRUNKING TALKGROUPS screen (F4/F4/F4/F7). This function is available for this switch ONLY on ASTRO XTS 3000 models and only on Switch Position A. Keypad Lock Locks the keypad. Mute Enable/disable keypad beeps. PL Disable Disables PL/DPL decoder (i.e. Carrier Squelch only). Scan Enables Channel Scan. This feature must also be configured on the CONVENTIONAL PERSONALITY screen (F4/F6/ F3). For Trunked radios, this feature must also be configured on the TRUNKING PERSONALITY screen (F4/F4/F4). Scan List Prgm Enables Scan List Programming. This feature must also be configured on the CONVENTIONAL PERSONALITY screen (F4/F6/ F3). For Trunked radios, this feature must also be configured on the TRUNKING PERSONALITY screen (F4/F4/F4). Talkaround/ DirectEnter Talkaround mode (Tx freq = Rx freq). This feature must also be configured on the CONVENTIONAL PERSONALITY screen (F4/F6/ F3). Tx Inhibit Disables all transmissions. Tx Low Power Changes Tx Power to the low setting. Unprogrammed A bad key chirp tone will sound. Zone Select Select or change Zones. This function must be assigned for BOTH Conventional and Trunking operations if applicable), and for BOTH positions of this switch.